ATSAME54P19A-AU-EFP vs ATSAME54-XPRO Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ATSAME54P19A-AU-EFP sa pamamagitan ng Microchip Technology at ATSAME54-XPRO sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Microchip Technology
ATSAME54P19A-AU-EFP - 120MHz Cortex-M4F MCU 512KB | Microchip
ATSAME54P19A-AU-EFP ✓ NakahandaMicrochip Technology
ATSAME54-XPRO - SAM E54 120MHz Cortex-M4F Evaluation Board | Microchip
ATSAME54-XPRO ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ATSAME54P19A-AU-EFP | ATSAME54-XPRO |
|---|---|---|
| Brand | Microchip Technology | Microchip Technology |
| Kategorya | Microcontrollers | Development Boards |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Core Architecture | ARM Cortex-M4F with FPU and DSP | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz | — |
| Program Flash Memory | 512 KB (dual-panel with ECC) | — |
| SRAM | 128 KB (with ECC) | 256 KB with ECC (on target MCU) |
| Packhaging | 128-pin TQFP (14x14 mm) | — |
| Supply Voltage (VDD) | 1.71 V to 3.63 V | — |
| Temperature na Operasyon | -40 C to +85 C (industrial) | — |
| USB | USB 2.0 Full-Speed with embedded PHY | — |
| Ethernet | 10/100 Mbps MAC with IEEE 1588 (external PHY required) | — |
| CAN | CAN-FD | — |
| ADC | 12-bit, up to 1 Msps | — |
| DAC | 12-bit | — |
| Crypto Accelerator | AES, TRNG | — |
| DMA Channels | 32 (8 channels x 4 priority levels x 2 instances) | — |
| SERCOM Modules | Up to 6 (UART/SPI/I2C configurable) | — |
| Tindminan RoHS | ROHS3 Compliant | Compliant |
| Product Type | — | Evaluation Kit / Development Board |
| Target MCU | — | ATSAME54P20A |
| Core Processor | — | ARM Cortex-M4F (with FPU and DSP extensions) |
| Maximum Clock Speed | — | 120 MHz |
| Flash Memory | — | 1 MB dual-panel Flash with ECC (on target MCU) |
| Embedded Debugger | — | Atmel EDBG (onboard, no external probe required) |
| Debug Interfaces | — | 10-pin Cortex Debug (SWD), 20-pin Cortex Debug + ETM (4-bit trace) |
| Main Crystal | — | 12 MHz |
| Backup Crystal | — | 32.768 kHz (RTC reference) |
| Backup Power | — | Supercapacitor for RTC retention |
| CAN Transceiver | — | ATA6561 (CAN-FD capable) |
| Extension Headers | — | 2x Xplained Pro extension headers, mikroBUS socket |
| Capture Interface | — | Parallel Capture Controller (ArduCAM compatible) header |
| USB Interfaces | — | USB-C debug (EDBG), USB-C micro-B device |
| Operating System Support | — | Azure RTOS, Zephyr RTOS, FreeRTOS, TinyGo, MPLAB X, Atmel Studio 7 |