BTS3035TFATMA1 vs BTS3050EJXUMA1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng BTS3035TFATMA1 sa pamamagitan ng Infineon at BTS3050EJXUMA1 sa pamamagitan ng Infineon. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | BTS3035TFATMA1 | BTS3050EJXUMA1 |
|---|---|---|
| Brand | Infineon | Infineon |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | Low-Side Power Switch | Smart Low-Side Power Switch |
| Technology | N-Channel MOSFET | N-Channel Vertical Power MOSFET (HITFET +12V) |
| Number of Channels | 1 | 1 (Single channel) |
| Input Type | CMOS Logic Level | — |
| Continuous Drain Current | 5 A | — |
| On-Resistance (RDS(on)) | 30 mOhm (typical) | — |
| Drain-Source Voltage (VDS) Max | 40 V | — |
| Operating Voltage Range | 12 V nominal (load-dump tolerant to 40 V) | — |
| Fault Protection | Over-current, Short-circuit, Over-temperature, ESD | — |
| Status Feedback | Yes (open-drain diagnostic output) | — |
| Reverse Battery Protection | Integrated | — |
| Hanay ng Temperature na Operasyon | -40C to +150C (junction) | [DATA_NEEDED: Tj range] |
| Packhaging | PG-TO252-3-313 (DPAK) | PG-TDSO-8-31 (TDSO8-31) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Level ng MSL | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| Tindminan RoHS | Compliant | Compliant |
| Automotive Grade | AEC-Q100 qualified | AEC-Q100 qualified (HITFET +12V family) |
| On-State Resistance (RDS(on)) | — | 50 mΩ (typical at 25 °C) |
| Continuous Load Current | — | 4 A |
| Topolohiya | — | Low-Side Switch (1:1) |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb max rating] |
| Load Voltage | — | 12 V automotive nominal |
| ESD Protection | — | Yes (on IN pin / Source / Ground) |
| Thermal Protection | — | Auto-restart overtemperature shutdown |
| Limit ng Current | — | [DATA_NEEDED: ILIM value] |