CP2101 vs CP2102N-A02-GQFN28 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng CP2101 sa pamamagitan ng Silicon Labs at CP2102N-A02-GQFN28 sa pamamagitan ng Silicon Labs. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Silicon Labs
CP2102N-A02-GQFN28 USB-to-UART Bridge, QFN28 | Silicon Labs
CP2102N-A02-GQFN28 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | CP2101 | CP2102N-A02-GQFN28 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Huling Pagbili | Aktibo |
| Katayuan ng Stock | — | In Stock |
| Presyo ng Yunit (USD) | — | $2.35 |
| Fungsi | USB to UART Bridge Controller | USB 2.0 to UART Bridge Controller |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Packhaging | MLP/QFN-28 (5 x 5 mm) | QFN-28 (5x5 mm) |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature] | -40C to +85C |
| Tindminan RoHS | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| Protocol | — | USB 2.0 Full-Speed |
| Supply Voltage (VDD) | — | 3 V to 3.6 V |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Output | — | 3.3 V |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |
| Uri ng Pagpapasok | — | Surface Mount |