CP2102N-A01-GQFN28 vs CP2102N-A02-GQFN28 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng CP2102N-A01-GQFN28 sa pamamagitan ng Silicon Labs at CP2102N-A02-GQFN28 sa pamamagitan ng Silicon Labs. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Silicon Labs
CP2102N-A01-GQFN28 - USB to UART Bridge QFN-28 | Silicon Labs (Tape & Reel)
CP2102N-A01-GQFN28 ✓ NakahandaSilicon Labs
CP2102N-A02-GQFN28 USB-to-UART Bridge, QFN28 | Silicon Labs
CP2102N-A02-GQFN28 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | CP2102N-A01-GQFN28 | CP2102N-A02-GQFN28 |
|---|---|---|
| Brand | Silicon Labs | Silicon Labs |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Katayuan ng Stock | — | In Stock |
| Presyo ng Yunit (USD) | — | $2.35 |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Rate ng Data | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | 3.3 V |
| Temperature na Operasyon | -40 C to +85 C | -40C to +85C |
| Packhaging | 28-QFN (5x5 mm) with exposed pad | QFN-28 (5x5 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| Level ng MSL | MSL3 (per JEDEC J-STD-020) | — |
| Tindminan RoHS | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| Fungsi | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |