ISO1432DWR vs ISO1450BDWR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng ISO1432DWR sa pamamagitan ng Texas Instruments at ISO1450BDWR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
ISO1432DWR - 12Mbps Isolated Full-Duplex RS-485/RS-422 Transceiver | TI (Tape & Reel)
ISO1432DWR ✓ NakahandaTexas Instruments
ISO1450BDWR - 50Mbps 5kVrms Isolated RS-485/RS-422 Transceiver | Texas Instruments
ISO1450BDWR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | ISO1432DWR | ISO1450BDWR |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Drivers, Receivers, Transceivers | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Fungsi | Transceiver, Isolated | Isolated half-duplex RS-485 / RS-422 transceiver |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Full | Half |
| Data Rate (max) | 12 Mbps | 50 Mbps |
| Isolation Voltage | 5000 Vrms (reinforced) | — |
| Supply Voltage (Vcc1, Vcc2) | 3 V to 5.5 V | — |
| Temperature na Operasyon | -40 °C to +125 °C | -40C to +125C |
| Packhaging | 16-pin SOIC (DW) | SOIC-16 wide-body (DW), 16 pins |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Receiver Hysteresis | [DATA_NEEDED: typical value] | [DATA_NEEDED: receiver hysteresis voltage] |
| Bus Pin ESD (HBM) | [DATA_NEEDED: HBM rating] | ±4 kV |
| Common-Mode Transient Immunity | [DATA_NEEDED: CMTI value] | — |
| UL Recognition | UL 1577 recognized | — |
| Tindminan RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Level ng MSL | [DATA_NEEDED: MSL rating] | 3 (per JEDEC J-STD-020) |
| Isolation Voltage (rms) | — | 5 kVrms (reinforced) |
| Number of Drivers / Receivers | — | 1/1 |
| Supply Voltage VCC1 (logic side) | — | 3 V to 5.5 V |
| Supply Voltage VCC2 (bus side) | — | Internally generated by isolated DC-DC |
| Bus Pin ESD (IEC 61000-4-2) | — | ±16 kV (air / contact, per datasheet) |
| IEC 61000-4-4 EFT Immunity | — | ±4 kV |
| Surge Immunity | — | [DATA_NEEDED: IEC 61000-4-5 surge rating] |
| Unit Load | — | 1/8 (up to 256 nodes on bus) |
| Common-Mode Range | — | Wide common-mode bus voltage range (per datasheet) |
| Thermal Shutdown | — | Yes |
| Current Limiting | — | Yes |
| Low-Power Standby | — | Yes |
| Compliance Standards | — | TIA/EIA-485-A, TIA/EIA-422, IEC 61000-4-2, IEC 61000-4-4 |