LM5013DDAR vs LM5013DDART Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng LM5013DDAR sa pamamagitan ng Texas Instruments at LM5013DDART sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
LM5013DDART - 100V 3.5A Non-Sync Buck DC/DC Converter | TI
LM5013DDART ✓ NakahandaPagsanggunian na paghahambing
| Parametro | LM5013DDAR | LM5013DDART |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | DC-DC Converters | DC-DC Converters |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Topolohiya | Buck (Step-Down) | Non-synchronous buck (step-down) |
| Hanay ng Voltage ng Input | 6 V to 100 V | 6 V to 100 V |
| Hanay ng Output Volte | 1.2 V (Adjustable) | 1.2 V to [DATA_NEEDED: VOUT max] |
| Maksimum na Current ng Output | 3.5 A | — |
| Takbo ng Pagpipili | Up to 1 MHz | [DATA_NEEDED: fSW max] |
| Minimum On-Time | 50 ns | — |
| Integrated High-Side MOSFET RDS(on) | 0.25 ohm | — |
| Control Architecture | Constant On-Time (COT) | — |
| Quiescent Current (No Load, Sleep) | 10 uA | — |
| Shutdown Quiescent Current | 3.1 uA | — |
| Soft-Start Time | 3.5 ms (fixed internal) | — |
| Temperature ng Junction na Operasyon | -40C to +125C | — |
| Packhaging | 8-Pin SO PowerPAD (3.90 mm width, 1.27 mm pitch) | 8-Pin SO PowerPAD (DDA) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Protection Features | UVLO, Peak Current-Limit, Thermal Shutdown | — |
| PGOOD Indicator | Open-drain output | — |
| Tindminan RoHS | Compliant | Compliant |
| Continuous Output Current | — | 3.5 A |
| Minimum Controllable On-Time | — | 50 ns |
| Internal Soft-Start | — | 3.5 ms (fixed) |
| Control Mode | — | Peak current mode |
| Input UVLO | — | Yes |
| Peak Current-Limit Protection | — | Yes |
| Thermal Shutdown | — | Yes |
| Junction Temperature Range | — | -40 C to +125 C |
| Level ng MSL | — | [DATA_NEEDED: MSL] |