MAX3485ESA+ vs SN65HVD70DGSR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX3485ESA+ sa pamamagitan ng Analog Devices at SN65HVD70DGSR sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX3485ESA+ - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+ ✓ NakahandaTexas Instruments
SN65HVD70DGSR - 3.3V Full-Duplex RS-485 400kbps Transceiver, 10-VSSOP | Texas Instruments
SN65HVD70DGSR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX3485ESA+ | SN65HVD70DGSR |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 transceiver | RS-485 / RS-422 Transceiver |
| Volte ng Pagbibigay | 3.3 V | — |
| Maximum Data Rate | 10 Mbps | — |
| Driver Count | 1 | — |
| Receiver Count | 1 | — |
| Supported Standards | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate-limited true transceiver | — |
| Packhaging | 8-pin SOIC | 10-pin VSSOP (DGS) with PowerPAD |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Power Class | Low-power transceiver | — |
| Production Status | PRODUCTION | — |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | -40 °C to +125 °C |
| ESD Protection | [DATA_NEEDED: ESD protection rating] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: typical and maximum supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3.0 V to 3.6 V |
| Rate ng Data | — | Up to 400 kbps |
| IEC ESD Protection (Contact) | — | ±12 kV (IEC 61000-4-2) |
| HBM ESD Protection (Bus pins) | — | ±30 kV (HBM) |
| Receiver Hysteresis | — | 50 mV (typical) |
| Common-Mode Range | — | -7 V to +12 V |
| Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Driver Enable | — | Active-high |
| Receiver Enable | — | Active-low |
| Standby Current | — | < 5 µA (both disabled) |