MAX485EESA+ vs SP485EN-L Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485EESA+ sa pamamagitan ng Analog Devices at SP485EN-L sa pamamagitan ng MaxLinear. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX485EESA+ - ±15kV ESD RS-485/RS-422 Transceiver | Analog Devices
MAX485EESA+ ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485EESA+ | SP485EN-L |
|---|---|---|
| Brand | Analog Devices | MaxLinear |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 Transceiver | Half-duplex differential transceiver |
| Protocol | RS-485, RS-422 | — |
| Duplex | Half-Duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 4.75 V to 5.25 V | — |
| Rate ng Data | Up to 2.5 Mbps | — |
| ESD Protection (Bus Pins, HBM) | ±15 kV | — |
| Driver Slew Rate | Limited (low-EMI) | — |
| Quiescent Supply Current | 1 mA (typical) | — |
| Number of Nodes on Bus | 32 (1/2 unit load) | — |
| Receiver Input Impedance | 96 kΩ (1/2 unit load) | — |
| Hanay ng Temperature na Operasyon | -40 °C to +85 °C | -40°C to +85°C |
| Packhaging / Kaso | 8-pin SOIC (SO-8, 3.9 mm body) | — |
| Uri ng Pagpapasok | Surface Mount | Surface mount |
| Lead-Free / RoHS Status | Lead-Free, RoHS compliant | — |
| Level ng MSL | 1 (Unlimited) | — |
| Interface Standards | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.75V to 5.25V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Duplex Mode | — | Half-duplex |
| Receiver Input Type | — | Differential Schmitt-trigger input |
| Process Technology | — | BiCMOS |
| Packhaging | — | 8-pin SOIC |
| Package Width | — | 3.9 mm |
| Package Length | — | 4.9 mm |
| Transceiver Count per Package | — | 1 |
| Supply Decoupling Requirement | — | [DATA_NEEDED: recommended decoupling capacitor value and ESR] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: receiver and driver propagation delay] |
| Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Shutdown Function | — | [DATA_NEEDED: shutdown or power-save support] |
| Tindminan RoHS | — | unknown |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |