MAX485EESA+ vs SP485EN-L 비교

다음의 상세 나란히 비교: MAX485EESA+ 제조: Analog Devices 및 SP485EN-L 제조: MaxLinear. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 MAX485EESA+ SP485EN-L
브랜드 Analog Devices MaxLinear
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485/RS-422 Transceiver Half-duplex differential transceiver
Protocol RS-485, RS-422 —
Duplex Half-Duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 4.75 V to 5.25 V —
데이터 속도 Up to 2.5 Mbps —
ESD Protection (Bus Pins, HBM) ±15 kV —
Driver Slew Rate Limited (low-EMI) —
Quiescent Supply Current 1 mA (typical) —
Number of Nodes on Bus 32 (1/2 unit load) —
Receiver Input Impedance 96 kΩ (1/2 unit load) —
동작 온도 범위 -40 °C to +85 °C -40°C to +85°C
패키지 / 케이스 8-pin SOIC (SO-8, 3.9 mm body) —
실장 유형 Surface Mount Surface mount
Lead-Free / RoHS Status Lead-Free, RoHS compliant —
MSL 레벨 1 (Unlimited) —
Interface Standards — RS-422 and RS-485
Maximum Data Rate — 5 Mbps
Supply Voltage Range — 4.75V to 5.25V
Nominal Supply Voltage — 5 V
Driver and Receiver Count — 1 differential driver and 1 differential receiver
Duplex Mode — Half-duplex
Receiver Input Type — Differential Schmitt-trigger input
Process Technology — BiCMOS
패키지 — 8-pin SOIC
Package Width — 3.9 mm
Package Length — 4.9 mm
Transceiver Count per Package — 1
Supply Decoupling Requirement — [DATA_NEEDED: recommended decoupling capacitor value and ESR]
Driver Output Current — [DATA_NEEDED: driver output current]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Propagation Delay — [DATA_NEEDED: receiver and driver propagation delay]
Input Impedance — [DATA_NEEDED: receiver input impedance]
Shutdown Function — [DATA_NEEDED: shutdown or power-save support]
RoHS 상태 — unknown
REACH Status — unknown
AEC-Q100 Qualification — [DATA_NEEDED: automotive qualification status]

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청