MAX485EPA+ vs SN75176 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MAX485EPA+ sa pamamagitan ng Analog Devices at SN75176 sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Analog Devices
MAX485EPA+ - 2.5Mbps RS-485/RS-422 Transceiver | Maxim Integrated
MAX485EPA+ ✓ NakahandaTexas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | MAX485EPA+ | SN75176 |
|---|---|---|
| Brand | Analog Devices | Texas Instruments |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 transceiver | — |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| Communication Mode | Half-duplex | — |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Maximum Data Rate | 2.5 Mbps | — |
| Slew Rate | Not limited | — |
| Driver Protection | Short-circuit current limited and protected | — |
| Packhaging | 8-pin PDIP | 8-pin PDIP (P) |
| Uri ng Pagpapasok | Through-hole | Through-Hole |
| Interface Standards | RS-422 and RS-485 | — |
| Driver Output | Differential | — |
| Receiver Input | Differential | — |
| Power Class | Low-power transceiver | — |
| Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | 0 °C to +70 °C |
| Kuru-kuryente ng Kapayapaan | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Voltage | [DATA_NEEDED: common-mode voltage range] | — |
| ESD Protection | [DATA_NEEDED: ESD rating] | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fungsi | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Receiver Hysteresis | — | 50 mV (typical) |
| Supply Voltage (Vcc) | — | 4.75 V to 5.25 V |
| Driver Output Current | — | ±60 mA (max) |
| Common-Mode Input Range | — | -7 V to +12 V |
| Differential Input Threshold | — | ±200 mV |
| Quiescent Supply Current (enabled) | — | 30 mA (typical) |
| Shutdown Supply Current | — | 1 µA (typical) |
| Standards Compliance | — | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 |