MMA7340LR1 vs MMA7360LR1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng MMA7340LR1 sa pamamagitan ng NXP Semiconductors at MMA7360LR1 sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | MMA7340LR1 | MMA7360LR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Kategorya | Motion Sensors | Motion Sensors |
| Katayuan ng Lifecycle | Aktibo | Obsolete |
| Type ng Sensor | 3-Axis Capacitive MEMS Accelerometer | 3-Axis Capacitive MEMS Accelerometer |
| Acceleration Range | ±3g, ±11g (selectable via g-Select) | ±1.5g, ±6g (selectable via g-Select pin) |
| Type ng Output | Analog voltage (one VOUT per axis) | Analog, ratiometric (X, Y, Z) |
| Sensitivity (3g mode) | [DATA_NEEDED: 3g mode sensitivity mV/g] | — |
| Sensitivity (11g mode) | [DATA_NEEDED: 11g mode sensitivity mV/g] | — |
| Zero-g Offset (factory trimmed) | [DATA_NEEDED: zero-g offset V] | — |
| Bandwidth (X, Y axes) | 400 Hz | 400 Hz |
| Bandwidth (Z axis) | 300 Hz | 300 Hz |
| Filter | 1-pole low-pass | — |
| Self-Test | Yes (logic-level input) | — |
| Sleep Mode | Yes (logic-level input) | — |
| Volte ng Pagbibigay | 2.2 V to 3.6 V (typical 3.3 V) | 2.2 V to 3.6 V |
| Supply Current (active) | [DATA_NEEDED: active supply current mA] | — |
| Supply Current (sleep) | [DATA_NEEDED: sleep supply current uA] | — |
| Temperature na Operasyon | -40 C to +85 C | -40C to +85C |
| Packhaging | 14-LGA (3 x 5 mm) | 14-LGA (3 mm x 5 mm x 1 mm) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | Compliant | Compliant (Lead Free) |
| Lead-Free Status | Lead Free | — |
| Sensitivity (±1.5g mode, Vdd=3.3V) | — | 800 mV/g |
| Sensitivity (±6g mode, Vdd=3.3V) | — | 200 mV/g |
| Supply Current (typical) | — | 400 uA |
| Self-Test Current | — | 1.5 mA (active) |
| 0g-Detect Output | — | Yes (linear freefall interrupt) |
| g-Select Input | — | Yes (logic high = ±6g, logic low = ±1.5g) |