SI8715BC-A-IS vs SI8710BC-B-IS Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SI8715BC-A-IS sa pamamagitan ng Skyworks Solutions at SI8710BC-B-IS sa pamamagitan ng Skyworks Solutions. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Skyworks Solutions
SI8715BC-A-IS SI8715BC-A-IS - 3.75 kV 1-Ch Digital Isolator 15 Mbps SOIC-8 | Skyworks

SI8715BC-A-IS - 3.75 kV 1-Ch Digital Isolator 15 Mbps SOIC-8 | Skyworks

SI8715BC-A-IS ✓ Nakahanda
Skyworks Solutions
SI8710BC-B-IS SI8710BC-B-IS - 1-Ch 15Mbps Digital Isolator | Skyworks

SI8710BC-B-IS - 1-Ch 15Mbps Digital Isolator | Skyworks

SI8710BC-B-IS ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SI8715BC-A-IS SI8710BC-B-IS
Brand Skyworks Solutions Skyworks Solutions
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Isolation Voltage (1 min) 3750 Vrms —
Isolation Type Capacitive / RF carrier (LED emulator input) —
Number of Channels 1 1
Directionality Unidirectional (input to output) —
Maximum Data Rate 15 Mbps —
Common-Mode Transient Immunity (CMTI) >50 kV/us (typical) 35 kV/us (minimum), >50 kV/us (typical)
Output Supply Voltage 2.5 V to 5.5 V —
Propagation Delay (typ.) 50 ns —
Input Drive Current-driven emulated LED (external resistor required) —
Packhaging 8-SOIC (0.154", 3.90 mm width) 8-SOIC (0.154 inch, 3.90 mm width)
Uri ng Pagpapasok Surface Mount Surface Mount
Hanay ng Temperature na Operasyon -40 to +125 C —
Level ng MSL [DATA_NEEDED: MSL moisture sensitivity level] —
Tindminan RoHS Compliant Compliant
Lead-Free / Halogen-Free Yes / [DATA_NEEDED: halogen-free status] —
FIT Rate Advantage vs Optocoupler Approximately 10x lower —
Pin-to-Pin Optocoupler Replacement Yes (drop-in) —
Fungsi — Single-channel digital isolator (LED emulator input, open-collector output)
Rate ng Data — 15 Mbps (maximum)
Propagation Delay — 60 ns (maximum)
Isolation Voltage — 3750 Vrms
Supply Voltage (VDD) — 3 V to 30 V
Input Type — LED emulator (current-driven)
Type ng Output — Open-collector
Temperature na Operasyon — -40C to +125C
Inputs - Side 1 / Side 2 — 1 / 0
Technology — CMOS capacitive isolation

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita