SN65HVD230DR vs MCP2551-I-SN Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD230DR sa pamamagitan ng Texas Instruments at MCP2551-I-SN sa pamamagitan ng Microchip Technology. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
SN65HVD230DR - 3.3V CAN Transceiver 1Mbps 8-SOIC | Texas Instruments
SN65HVD230DR ✓ NakahandaMicrochip Technology
MCP2551-I/SN - High-Speed CAN Transceiver, 1Mb/s, ISO-11898 | Microchip
MCP2551-I-SN ⚠ Huling PagbiliPagsanggunian na paghahambing
| Parametro | SN65HVD230DR | MCP2551-I-SN |
|---|---|---|
| Brand | Texas Instruments | Microchip Technology |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Huling Pagbili |
| Product Type | CAN Bus Transceiver | — |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Protocol | CANbus (ISO 11898-2) | CANbus (ISO-11898) |
| Volte ng Pagbibigay | 3 V to 3.6 V (3.3 V nominal) | 4.5 V to 5.5 V |
| Maximum Data Rate | 1 Mbps | — |
| Driver/Receiver Configuration | Half-Duplex | — |
| Standby Mode Supply Current | 370 uA typical | — |
| ESD Protection (Bus Pins, HBM) | Exceeds 16 kV | — |
| Maximum Nodes on Bus | 120 nodes | — |
| Receiver Common-Mode Range | -2 V to 7 V | — |
| Temperature na Operasyon | -40C to +85C | -40 C to +125 C (Industrial, I grade) |
| Packhaging | 8-SOIC (D) | 8-pin SOIC (SN, 0.154" / 3.90 mm width) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Tindminan RoHS | Compliant | — |
| RS Pin Function | Slew-rate control via external resistor | — |
| Fungsi | — | High-Speed CAN Transceiver |
| Data Rate (max) | — | 1 Mb/s |
| Common-Mode Range | — | -2 V to +7 V (typical ISO-11898-2) |
| Slope Control | — | Yes (RS pin, externally adjustable) |
| Standby Mode | — | Yes (low-current via Rs pin) |
| VREF Output | — | Yes (approx. VDD/2) |
| Bus Dominant Fault Detection | — | Yes (automatic receiver-only mode) |
| ESD Protection (CAN bus pins) | — | [DATA_NEEDED: HBM/CDM ESD rating] |
| Level ng MSL | — | 1 (per JEDEC J-STD-020, not explicitly stated in source) |