SN65HVD77D vs SN65HVD08D Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SN65HVD77D sa pamamagitan ng Texas Instruments at SN65HVD08D sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Texas Instruments
SN65HVD77D SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments

SN65HVD77D ✓ Nakahanda
Texas Instruments
SN65HVD08D SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments

SN65HVD08D ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SN65HVD77D SN65HVD08D
Brand Texas Instruments Texas Instruments
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Product Type Full-duplex RS-485 transceiver Half-duplex RS-485 transceiver
Supply Voltage Range 3.0 V to 3.6 V —
Nominal Supply Voltage 3.3 V —
Maximum Data Rate 50 Mbps 10 Mbps
Number of Drivers 1 —
Number of Receivers 1 —
Duplex Mode Full duplex —
Supported Standards RS-485 and RS-422 —
ESD Protection ±12 kV IEC —
Hanay ng Temperature na Operasyon -40°C to 125°C [DATA_NEEDED: operating temperature range]
Packhaging 8-pin SOIC (D) 8-pin SOIC
Package Width 3.90 mm —
Uri ng Pagpapasok Surface mount Surface mount
External Enable Controls None —
Tindminan RoHS Compliant [DATA_NEEDED: RoHS status]
Driver Output Type Differential Three-state differential line driver
Receiver Output Type Single-ended logic output —
Low-Power Standby Current Less than 5 µA when driver and receiver are disabled —
Termination Requirement External termination required —
Volte ng Pagbibigay — 3.3/5 V
Maximum Supply Voltage — 5.5 V
Quiescent Power Consumption — Less than 90 mW
Receiver Unit Load — 1/8 unit load
Maximum Bus Nodes — Up to 256 nodes
Bus-Pin ESD Protection — Exceeds 16 kV HBM
Receiver Type — Differential line receiver
Failsafe Receiver Behavior — Open-circuit, short-circuit, and idle-bus failsafe
Standards Compatibility — ANSI TIA/EIA-485-A and ISO-8482E
Cable-Powered Operation — 5-V power bus with up to 2 V line-voltage drop
REACH Status — [DATA_NEEDED: REACH status]

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita