SN65HVD77D vs SN65HVD08D So sánh
So sánh chi tiết song song của SN65HVD77D bằng Texas Instruments và SN65HVD08D bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
SN65HVD77D - 3.3V 50Mbps Full-Duplex RS-485 | Texas Instruments
SN65HVD77D ✓ Hoạt độngTexas Instruments
SN65HVD08D - 3.3/5V 10Mbps RS-485 Transceiver | Texas Instruments
SN65HVD08D ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | SN65HVD77D | SN65HVD08D |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Full-duplex RS-485 transceiver | Half-duplex RS-485 transceiver |
| Supply Voltage Range | 3.0 V to 3.6 V | — |
| Nominal Supply Voltage | 3.3 V | — |
| Maximum Data Rate | 50 Mbps | 10 Mbps |
| Number of Drivers | 1 | — |
| Number of Receivers | 1 | — |
| Duplex Mode | Full duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| ESD Protection | ±12 kV IEC | — |
| Khoảng nhiệt độ hoạt động | -40°C to 125°C | [DATA_NEEDED: operating temperature range] |
| Hộp | 8-pin SOIC (D) | 8-pin SOIC |
| Package Width | 3.90 mm | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| External Enable Controls | None | — |
| Trạng thái RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Driver Output Type | Differential | Three-state differential line driver |
| Receiver Output Type | Single-ended logic output | — |
| Low-Power Standby Current | Less than 5 µA when driver and receiver are disabled | — |
| Termination Requirement | External termination required | — |
| Điện áp cung cấp | — | 3.3/5 V |
| Maximum Supply Voltage | — | 5.5 V |
| Quiescent Power Consumption | — | Less than 90 mW |
| Receiver Unit Load | — | 1/8 unit load |
| Maximum Bus Nodes | — | Up to 256 nodes |
| Bus-Pin ESD Protection | — | Exceeds 16 kV HBM |
| Receiver Type | — | Differential line receiver |
| Failsafe Receiver Behavior | — | Open-circuit, short-circuit, and idle-bus failsafe |
| Standards Compatibility | — | ANSI TIA/EIA-485-A and ISO-8482E |
| Cable-Powered Operation | — | 5-V power bus with up to 2 V line-voltage drop |
| REACH Status | — | [DATA_NEEDED: REACH status] |