SP3232EEN-L vs SP232ECT-L Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SP3232EEN-L sa pamamagitan ng MaxLinear at SP232ECT-L sa pamamagitan ng MaxLinear. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Pagsanggunian na paghahambing
| Parametro | SP3232EEN-L | SP232ECT-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Transceiver Type | 2/2 transceiver, full RS-232 | — |
| Number of Drivers | 2 | 2 |
| Number of Receivers | 2 | 2 |
| Maximum Data Rate | 120 kbps | [DATA_NEEDED: maximum data rate] |
| Supply Voltage na Operasyon | 3 V to 5.5 V | — |
| Nominal Supply Current | 1 mA | — |
| Kuru-kuryente ng Pagbubuwag | 1 µA | — |
| Temperature na Operasyon | -40°C to +85°C | 0 C to +70 C |
| Packhaging | 16-pin SOIC | 16-SOIC (SOIC16W) |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| RS-232 Standard | True EIA/TIA-232-F operation | — |
| Charge-Pump Capacitor Value | 0.1 µF in 3.3 V operation | — |
| System ESD Rating | ±15 kV IEC 61000-4-2 and ±15 kV HBM | — |
| Receiver Status During Shutdown | Active for the SP3222E/SP3232E series | — |
| Power-Supply Topology | Single-supply charge-pump RS-232 interface | — |
| Tindminan RoHS | unknown | — |
| Lead-Free Status | unknown | — |
| Automotive Qualification | not_qualified | — |
| Device Type | — | 2/2 full RS-232 transceiver |
| Supply Voltage Range | — | 4.5 V to 5.5 V |
| Nominal Supply | — | 5 V |
| Protocol | — | RS-232 |
| Standard Compatibility | — | RS-232D and ITU V.28 |
| ESD Protection | — | +/-15 kV |
| Package Body Width | — | 7.50 mm |
| Package Length | — | 10.3 mm |
| Packaging | — | Tape and Reel |
| Internal Technology | — | CMOS |
| RoHS | — | Yes |
| External Capacitors | — | [DATA_NEEDED: external capacitor requirement] |
| Driver Output Level | — | [DATA_NEEDED: driver output levels] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |