SP485ECN-L vs SP485CN-L Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng SP485ECN-L sa pamamagitan ng MaxLinear at SP485CN-L sa pamamagitan ng MaxLinear. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ NakahandaPagsanggunian na paghahambing
| Parametro | SP485ECN-L | SP485CN-L |
|---|---|---|
| Brand | MaxLinear | MaxLinear |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-422/RS-485 half-duplex line transceiver | — |
| Driver Count | 1 driver | 1 |
| Receiver Count | 1 receiver | 1 |
| Volte ng Pagbibigay | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| Rate ng Data | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | — |
| Technology | BiCMOS | — |
| Packhaging | 8-pin SOIC | 8-pin SOIC |
| Package Width | 0.154 in (3.90 mm) | — |
| Uri ng Pagpapasok | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| Hanay ng Temperature na Operasyon | [DATA_NEEDED: operating temperature range] | — |
| Kuru-kuryente ng Pagbibigay | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | [DATA_NEEDED: lead-free status] |
| Transceiver Type | — | Single transmitter/single receiver half-duplex transceiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Logic and Bus Function | — | Bidifferential half-duplex serial interface |
| Architecture | — | BiCMOS |
| Power Class | — | Low-power operation |
| Temperature Range | — | 0 C to 70 C |
| Bus Topology | — | Half-duplex differential bus |
| Signaling | — | Differential RS-422/RS-485 |
| EMI Behavior | — | [DATA_NEEDED: slew-rate and transient-emission details] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Kuru-kuryente ng Kapayapaan | — | [DATA_NEEDED: quiescent current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Termination Requirement | — | [DATA_NEEDED: manufacturer termination and biasing guidance] |
| AEC-Q100 Qualification | — | not_applicable |