SP485ECN-L vs SP485CN-L 比較
詳細並排比較 SP485ECN-L 由 MaxLinear 與 SP485CN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ 啟用中規格比較
| 參數 | SP485ECN-L | SP485CN-L |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-422/RS-485 half-duplex line transceiver | — |
| Driver Count | 1 driver | 1 |
| Receiver Count | 1 receiver | 1 |
| 供應電壓 | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | — |
| 資料速率 | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | — |
| Technology | BiCMOS | — |
| 封裝 | 8-pin SOIC | 8-pin SOIC |
| Package Width | 0.154 in (3.90 mm) | — |
| 安裝類型 | Surface mount | Surface Mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | [DATA_NEEDED: lead-free status] |
| Transceiver Type | — | Single transmitter/single receiver half-duplex transceiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Logic and Bus Function | — | Bidifferential half-duplex serial interface |
| Architecture | — | BiCMOS |
| Power Class | — | Low-power operation |
| Temperature Range | — | 0 C to 70 C |
| Bus Topology | — | Half-duplex differential bus |
| Signaling | — | Differential RS-422/RS-485 |
| EMI Behavior | — | [DATA_NEEDED: slew-rate and transient-emission details] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Termination Requirement | — | [DATA_NEEDED: manufacturer termination and biasing guidance] |
| AEC-Q100 Qualification | — | not_applicable |