THVD1510DR vs ADM485ARZ-REEL Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng THVD1510DR sa pamamagitan ng Texas Instruments at ADM485ARZ-REEL sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
THVD1510DR - 5V RS-485 Transceiver, ±18kV ESD, SOIC-8 | Texas Instruments
THVD1510DR ✓ NakahandaAnalog Devices
ADM485ARZ-REEL - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices
ADM485ARZ-REEL ✓ NakahandaPagsanggunian na paghahambing
| Parametro | THVD1510DR | ADM485ARZ-REEL |
|---|---|---|
| Brand | Texas Instruments | Analog Devices |
| Kategorya | Interface ICs | Interface ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Product Type | RS-485/RS-422 Transceiver | — |
| Protocol | RS-485, RS-422 | RS-422, RS-485 |
| Configuration | 1 Driver / 1 Receiver (Half-Duplex) | — |
| Volte ng Pagbibigay | 4.5 V to 5.5 V | 5 V (single supply) |
| Signaling Rate | up to 10 Mbps | — |
| IEC ESD Protection (Bus) | ±18 kV (IEC 61000-4-2 contact/air) | — |
| HBM ESD Protection | ±16 kV (bus pins, per TI datasheet) | — |
| Common-Mode Range | ±25 V | -7 V to +12 V |
| Fault Tolerance | ±70 V (bus pins) | — |
| Receiver Unit Load | 1/8 UL (up to 256 nodes) | — |
| Receiver Type | True Fail-Safe | — |
| Quiescent Current (typ) | less than 1 mA | — |
| Temperature na Operasyon | -40 C to +125 C | — |
| Packhaging | SOIC-8 (D), 3.90 mm body width | SOIC-8 (SO-8) / SO-8 |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Bilang ng Pin | 8 | — |
| Tindminan RoHS | Compliant | Compliant |
| Type | — | Transceiver |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Rate ng Data | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| Hanay ng Temperature na Operasyon | — | -40 C to +85 C |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| REACH Status | — | Unaffected |
| Level ng MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |