UCC21710QDWRQ1 vs UCC21750-Q1 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng UCC21710QDWRQ1 sa pamamagitan ng Texas Instruments at UCC21750-Q1 sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
UCC21710QDWRQ1 - ±10A Isolated Gate Driver | TI | Automotive
UCC21710QDWRQ1 ✓ NakahandaTexas Instruments
UCC21750-Q1 - 10A Isolated SiC/IGBT Gate Driver | TI Automotive
UCC21750-Q1 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | UCC21710QDWRQ1 | UCC21750-Q1 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Power MOSFET Drivers | Power MOSFET Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Presyo ng Yunit (USD) | $2.74 | — |
| Fungsi | Single-channel isolated gate driver | — |
| Isolation Technology | SiO2 capacitive coupling | SiO2 capacitive (galvanic isolation) |
| Isolation Rating (rms) | 5.7 kVrms (reinforced) | — |
| Working Voltage (rms) | 1.5 kVrms | — |
| Peak Source Current | +10 A | +10 A |
| Peak Sink Current | -10 A | -10 A |
| Target Switches | SiC MOSFETs up to 1700 V, IGBTs | — |
| Propagation Delay (typ.) | 60 ns | — |
| CMTI (min.) | 100 V/ns | — |
| Output Supply Voltage (VCC2/VEE2) | 12.8 V to 18 V | — |
| Input Supply Voltage (VDD/VCCI) | 3 V to 5.5 V | — |
| Protection Features | DESAT, Miller clamp, UVLO, FLT, soft turn-off | DESAT overcurrent/short-circuit, active Miller clamp, UVLO (input + output), fault report |
| Packhaging | 16-SOIC (DW) wide-body | 16-pin SOIC (DW) wide-body, 8.0 mm creepage/clearance |
| Hanay ng Temperature na Operasyon | -40 C to +150 C | -40C to +125C (automotive) |
| Automotive Qualification | AEC-Q100 | — |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| RoHS | Compliant | — |
| Driver Type | — | Single-channel isolated gate driver |
| Isolation Rating (Reinforced) | — | 5.7 kVrms |
| Maximum DC Operating Voltage | — | 2121 V DC |
| Supported Switch Types | — | SiC MOSFET, IGBT |
| Output-side Supply Voltage | — | [DATA_NEEDED: VCC range] |
| Input-side Supply Voltage (VDD) | — | [DATA_NEEDED: VDD range] |
| CMTI (Common-Mode Transient Immunity) | — | >100 V/ns (typical) |
| Propagation Delay | — | [DATA_NEEDED: typical tpHL / tpLH] |
| Isolated Analog-to-PWM Sensor | — | Yes (temperature or voltage sensing) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Tindminan RoHS | — | Compliant |