VNH5180A-E vs VNH7070ASTR Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng VNH5180A-E sa pamamagitan ng STMicroelectronics at VNH7070ASTR sa pamamagitan ng STMicroelectronics. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
STMicroelectronics
VNH5180A-E - 41A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH5180A-E ✓ NakahandaSTMicroelectronics
VNH7070ASTR - 15A Automotive H-Bridge Motor Driver | STMicroelectronics
VNH7070ASTR ✓ NakahandaPagsanggunian na paghahambing
| Parametro | VNH5180A-E | VNH7070ASTR |
|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics |
| Kategorya | Motor Drivers | Motor Drivers |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Output Current | 41 A (continuous) | — |
| Supply Voltage Range | 5.5 V to 18 V | — |
| On-Resistance (per switch) | 20 mOhm | — |
| PWM Frequency | Up to 20 kHz | — |
| Packhaging | PowerSSO-36 (16-pin) | SO-16N (MultiWatt-15 derivative, exposed pad) |
| Uri ng Pagpapasok | Surface Mount | Surface Mount |
| Temperature na Operasyon | -40C to +150C | -40 C to +150 C (junction) |
| Thermal Resistance, Junction-to-Ambient | 30 C/W | — |
| Technology | VIPower M0-5 | VIPower M0-7 |
| AEC-Q100 Qualified | Yes | — |
| Undervoltage Lockout | Yes | — |
| Overvoltage Clamp | Yes | — |
| Thermal Shutdown | Yes | — |
| Load Current Limitation | Yes | — |
| Diagnostic Output | Yes | — |
| CMOS Compatible Inputs | 3 V and 5 V | — |
| Tindminan RoHS | Compliant | Compliant |
| Motor Type | — | DC brushed motor |
| Output Kumpigurasyon | — | Full H-bridge (dual high-side + dual low-side) |
| Supply Voltage (VCC) | — | 4 V to 28 V |
| Continuous Output Current | — | 15 A |
| On-State Resistance per Switch (Ron) | — | 40 mOhm (typical) |
| PWM Frequency (max) | — | 20 kHz |
| Logic Input Compatibility | — | 3.3 V and 5 V CMOS |
| Current Sense Output (CS) | — | Analog proportional voltage |
| Diagnostic Output (DIAG) | — | Active-high fault flag |
| Protection Features | — | UVLO, overvoltage clamp, thermal shutdown, short-circuit, open-load |
| Level ng MSL | — | 3 |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |