10M40DAF484C7G - MAX 10 FPGA, 40K LE, 484-BGA | Intel / Altera
MPN: 10M40DAF484C7G ✓ Nakahanda10M40DAF484C7G Ulas
A field-programmable gate array (FPGA) is a semiconductor device built around an array of configurable logic blocks (CLBs) connected via programmable interconnect. FPGAs sit at the top of the programmable logic hierarchy alongside CPLDs, and are used to implement custom digital logic, glue logic, signal conditioning, and compute pipelines that would otherwise require many discrete ICs. The MAX 10 family adds integrated features such as ADCs, PLLs, temperature-sensing diodes, and flash memory, blurring the line between FPGA and microcontroller-plus-SoC designs.
Key features of the 10M40DAF484C7G include 40,000 logic elements (LEs), 1,290,240 bits (approximately 160 Kbytes) of embedded user SRAM, 4 embedded DSP blocks, and an integrated 12-bit ADC. The 484-ball FineLine BGA exposes 360 general-purpose user I/Os supporting LVDS, LVCMOS, and other single-ended I/O standards. The 'C7G' speed/grade suffix denotes a commercial temperature range device targeting cost-sensitive high-volume designs.
On the technical side, the part uses Intel's TSMC 55 nm embedded flash process, which gives instant-on behavior (configuration loaded in microseconds from internal flash) and supports dual-image configuration for fail-safe field updates. The integrated hard IP blocks (PLLs, ADC, JTAG, and temperature sensor) operate independently of the fabric, allowing deterministic latency for I/O conditioning and analog sampling even before user logic is loaded.
Typical applications for the 10M40DAF484C7G include industrial motor control, machine vision pre-processing, video bridging, I/O expansion and protocol translation (I2C, SPI, UART to LVDS or parallel), portable test instrumentation, and low-cost display controllers. The high I/O count (360) and 484-BGA footprint are well suited to designs that need to fan out to many external peripherals or high-speed parallel buses.
When designing with this device, allocate at least four PCB layers for signal routing under the BGA and follow Intel/Altera's power-sequencing guidance. Decouple each bank of I/O supplies with 0.1 microfarad plus bulk ceramic capacitors placed as close to the balls as the breakout allows. Quartus Prime is the supported design toolchain for this part.
This page synthesizes distributor pricing, package-level alternatives, and practical Quartus Prime design notes not present in the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na 10M40DAF484C7G — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok 10M40DAF484C7G (parehas na form factor at footprint) — pagkakaiba sa Package, Operating Temperature, PLLs, Embedded Memory, Process Technology.
10M40DAF484C8G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
10M40DAF484I7G
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
10M40DAF256C7G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10M25DAF484C7G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10M16DAF484C7G
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →10M40DAF484C7G Mga Pinakamataas na Rating at Electrical Characteristics
| Family | MAX 10 |
| Logic Elements (LE) | 40,000 |
| Embedded Memory (bits) | 1,290,240 |
| User I/Os | 360 |
| DSP Blocks | 4 |
| Packhaging | 484-BGA (FineLine BGA) |
| Configuration Memory | Internal flash, dual-image capable |
| On-chip ADC | 12-bit, integrated |
| Temperature Range | Commercial (C7G suffix) |
| Process Node | 55 nm embedded flash |
| Uri ng Pagpapasok | Surface Mount (BGA) |
| Tindminan RoHS | Compliant |
| Lead-Free | Yes |
| Supported Design Tool | Intel Quartus Prime |
Gabay sa Pin Configuration ng 10M40DAF484C7G 484-bga (fineline bga)
Pin configuration para sa 10M40DAF484C7G (484-bga (fineline bga) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa 10M40DAF484C7G.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
10M40DAF484C7G ay nararapat para sa 7 aplikasyons: Industrial Motor Control, Machine Vision Pre-Processing, Video Bridging and Protocol Translation, I/O Expansion and Protocol Translation, Portable Test and Measurement Instrumentation, Low-Cost Display Controllers, Industrial IoT Edge Gateways.
Industrial Motor Control
The 10M40DAF484C7G fits industrial motor control applications because its 40,000 logic elements and 4 DSP blocks deliver enough fabric to implement field-oriented control (FOC) loops, PWM generation, and encoder decoding on a single device. The 360 user I/Os in the 484-BGA package fan out to multi-axis gate drivers, Hall/quadrature encoders, and isolation barriers without external bus expander chips. The integrated 12-bit ADC samples motor phase currents in real time, eliminating an external ADC and reducing BOM cost. The MAX 10's instant-on flash configuration ensures the controller is alive within microseconds of power-up, which is critical for safe-turbous spindle braking.
Inirekomenda
Machine Vision Pre-Processing
The 10M40DAF484C7G is well suited to entry-level machine vision pre-processing pipelines, where 40K logic elements implement Bayer demosaicing, simple thresholding, and frame-rate conversion without needing an external processor. The 1,290,240 bits of embedded SRAM serve as line buffers for image data, and the high I/O count supports direct MIPI-CSI or parallel LVDS camera interfaces alongside the 484-BGA footprint. The on-chip ADC samples ambient-light sensors or trigger inputs, while 4 DSP blocks accelerate convolution kernels for edge detection. Designers using Quartus Prime can leverage the VIP suite to assemble pixel pipelines quickly.
Inirekomenda
Video Bridging and Protocol Translation
For video bridging designs, the 10M40DAF484C7G converts between HDMI, MIPI-CSI, parallel RGB, and LVDS without an external companion chip. Its 40K logic elements hold the pixel pipeline and color-space converter logic, while the 1,290,240 bits of SRAM buffer active scan lines. The 360 user I/Os in the 484-BGA package accommodate the wide parallel buses common in industrial panels (18/30-bit RGB) and the high-speed serial lanes used by MIPI/CSI. The integrated temperature-sensing diode lets the design throttle the backlight or warn of overheating without external thermistors.
Inirekomenda
I/O Expansion and Protocol Translation
The 10M40DAF484C7G works well as a protocol-translation hub where a host CPU lacks enough native I/O for industrial sensors, GPIOs, or legacy buses. The 360 user I/Os in the 484-BGA expose UART, SPI, I2C, RS-485, and parallel buses simultaneously, while 40K logic elements handle address mapping and timing translation. The instant-on flash configuration means translation begins as soon as power is applied, with no external boot device. Dual-image flash allows field firmware updates without bricking the hub.
Inirekomenda
Portable Test and Measurement Instrumentation
Handheld oscilloscopes, data loggers, and bench instruments benefit from the 10M40DAF484C7G's mix of on-chip ADC, 40K logic elements, and 360 I/Os. The integrated 12-bit ADC digitizes analog front-end signals at up to 1 MSPS, while logic elements implement trigger decoding, FFT pre-processing, and display refresh. The 1,290,240 bits of SRAM act as deep capture memory for transient events. The commercial temperature range and surface-mount BGA fit inside compact instrument enclosures, and Quartus Prime's SignalTap logic analyzer provides on-chip debug without external probes.
Inirekomenda
Low-Cost Display Controllers
Low-cost display controllers for industrial HMIs, kiosks, and consumer appliances use the 10M40DAF484C7G to drive TFT panels up to 1080p from a low-bandwidth host interface. The 40K logic elements implement pixel doubling, color correction, and backlight PWM, while the 360 user I/Os expose RGB888 plus LVDS to the panel. The integrated ADC reads touch-controller or ambient-light signals, eliminating a separate microcontroller. The 484-BGA package sits between display and host board, simplifying the mechanical layout of slim-panel designs.
Inirekomenda
Industrial IoT Edge Gateways
The 10M40DAF484C7G serves as the programmable logic heart of industrial IoT edge gateways, aggregating data from sensors, RS-485 chains, and CAN buses before forwarding to the host processor. Its 40K logic elements implement Modbus, CANopen, and EtherCAT slave stacks directly, while the 360 user I/Os handle multiple physical interfaces concurrently. The 1,290,240 bits of embedded SRAM buffer protocol frames without external memory. The MAX 10's industrial-temp variant (10M40DAF484I7G) extends operation to -40C to 100C for factory-floor enclosures, and the instant-on configuration brings the gateway online within microseconds.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for 10M40DAF484C7G — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | 10M40DAF484C8G | 10M40DAF484I7G | 10M25DAF484C7G | 10M16DAF484C7G |
|---|---|---|---|---|---|
| Package | 484-BGA (FineLine BGA) | 484-BGA (FineLine BGA) - same | 484-BGA (FineLine BGA) - same | 484-BGA (FineLine BGA) - same | 484-BGA (FineLine BGA) - same |
| Brand | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera | Intel / Altera |
| Logic Elements (LE) | 40,000 | 40,000 | 40,000 | 25,000 | 16,000 |
| Embedded Memory (bits) | 1,290,240 | 1,290,240 | 1,290,240 | 837,120 | 549,888 |
| User I/Os | 360 | 360 | 360 | 360 | 360 |
| DSP Blocks | 4 | 4 | 4 | 3 | 2 |
| Temperature Grade | Commercial (C7G) | Commercial (C8G) | Industrial (I7G) | Commercial (C7G) | Commercial (C7G) |
| On-chip ADC | 12-bit, integrated | 12-bit, integrated | 12-bit, integrated | 12-bit, integrated | 12-bit, integrated |
| Configuration Memory | Internal flash, dual-image | Internal flash, dual-image | Internal flash, dual-image | Internal flash, dual-image | Internal flash, dual-image |
Pangunahing mga Pagkakaiba
- Highest logic density in 484-BGA within the MAX 10 family (kumpara sa10M25DAF484C7G)
- Industrial-temperature drop-in available on identical silicon (kumpara sa10M40DAF484I7G)
- More user I/Os than competing FPGAs in similar package (kumpara sa10M16DAF484C7G)
- Integrated 12-bit ADC eliminates external ADC (kumpara saLattice ECP5 (cross-family, non-BGA equivalent))
Talaan ng Disenyo
The 484-BGA FineLine package of the 10M40DAF484C7G requires at least a 4-layer PCB stack-up with continuous ground and power planes directly under the BGA for return-path integrity. Use 0.5 mm pitch BGA escape routing with 4 mil traces and 4 mil spacing, and break out via-in-pad micro-vias if your fab supports them. Place 0.1 microfarad ceramic decoupling capacitors on every VCCIO/VCCINT ball within the breakout fan-out region; bulk 10 microfarad ceramics serve the FPGA core supply.
The 10M40DAF484C7G requires multiple supply rails (VCCINT core, VCCIO per I/O bank, VCCA_PLL, VCC_ADC) that must be sequenced according to Intel/Altera's MAX 10 power-up guidelines. Failing to sequence VCCINT before VCCIO can latch-up or damage the I/O cells. Use a dedicated power-management IC such as the LM3880 or a discrete MOSFET sequencing circuit. Estimated total quiescent current at 0C is approximately 200 mA on VCCINT; full-fabric switching adds 100-300 mA depending on toggle rate.
Estimated: at typical 25 percent toggle activity with 40K LE utilization, the 10M40DAF484C7G dissipates approximately 1.5 W to 2.0 W. The 484-BGA package has a theta_JA around 20 C/W on a 4-layer JEDEC board, producing a 30-40 C rise above ambient. For sealed industrial enclosures, consider attaching a small copper heat-spreader or thermal pad. Do not exceed the commercial temperature ceiling of 85 C at the case; switch to the 10M40DAF484I7G variant for -40 C to 100 C industrial deployments.
Use IBIS models for the MAX 10 to simulate LVDS and high-speed LVCMOS signaling before committing to the PCB. Match trace lengths within each LVDS pair to within 5 mils and keep impedance to 100 ohms differential. The 484-BGA package of the 10M40DAF484C7G has fine-pitch balls; follow the manufacturer-recommended BGA breakout template in the MAX 10 device pin connection guidelines. For DDR or LVDS memories, place series-termination resistors within 200 mils of the FPGA balls.
Do not leave any MAX 10 I/O bank supply (VCCIO) floating; unused banks still require power for the I/O buffers to enter a known state. Configure unused I/Os as tri-stated inputs with weak pull-up enabled to prevent floating pins drawing shoot-through current. Verify Quartus Prime device selection matches the exact 'C7G' speed/grade before programming; an 'I7G' file accidentally loaded into a commercial part may operate outside the rated temperature window.
Impormasyon ng Pagsunod sa Kautusan
RoHS and REACH compliance per Altera/Intel product page. Not AEC-Q100 qualified; choose automotive-grade MAX 10 variants for AEC-Q100 applications. Halogen-free status not stated explicitly - set to unknown.