A3P060-2VQG100I - ProASIC3 Flash FPGA 60K Gates | Microchip
MPN: A3P060-2VQG100I ✓ NakahandaA3P060-2VQG100I Ulas
An FPGA (Field-Programmable Gate Array) is a semiconductor device that implements user-defined digital logic through a fabric of configurable logic blocks, routing resources, and embedded memory. Within the programmable logic hierarchy, the ProASIC3 family targets low-density, single-chip applications that historically used CPLDs or small ASICs. Unlike SRAM-based FPGAs, ProASIC3 stores its configuration in nonvolatile on-chip flash, eliminating the need for an external configuration PROM and enabling instant-on, single-chip operation.
Key differentiating features include flash-based nonvolatility (live-at-power-up, secure from readback), reprogrammability without external boot devices, low total cost of ownership, and support for optional soft ARM processor cores. The A3P060 provides up to 144 kbits of true dual-port SRAM across the family, and its small 14 x 14 mm footprint with 0.5 mm pitch suits space-constrained designs.
Architecturally, the device uses the ProASIC3 VersaTile fabric, where each tile can be configured as a three-input lookup table, a D-flip-flop, or memory, allowing efficient mapping of both combinational and sequential logic. The 130-nm flash CMOS process combines low static power with robust radiation-tolerant flash cells.
Typical applications include CPLD replacement and glue-logic consolidation, industrial control and automation boards, portable and handheld instruments, and power-up sequencer or system-management functions where instant-on operation matters.
For design, plan I/O banking and 1.5V core supply decoupling early; the flash fabric means no configuration time, but I/O standards and drive strength must be set in Libero SoC constraint files.
This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet, optimizing for engineering selection workflows.
Mga alternatibo na pwedeng ilagay na A3P060-2VQG100I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok A3P060-2VQG100I (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, System Gates, Package, Package / Case, Process Technology.
A3P060-2VQG100
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A3P060-VQG100I
✅ Drop-In✗ Wala sa Stock
$6.95 / Yunit
Tingnan ang Datasheet →A3P060-1VQ100
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
A3P250L-1VQG100I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A3P125-1VQG100T
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A3P125-VQ100T
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →A3P060-2VQG100I Mga Pinakamataas na Rating at Electrical Characteristics
| Family | ProASIC3 |
| System Gates | 60000 |
| Logic Cells | 1536 |
| User I/Os | 71 |
| Embedded SRAM | 18432 bits |
| Maximum System Frequency | 310 MHz |
| Process Technology | 130 nm, 7-layer metal (6 copper), flash-based CMOS |
| Core Supply Voltage | 1.5 V |
| Logic Family | CMOS |
| Configuration Memory | On-chip flash (nonvolatile, live at power-up) |
| Packhaging | 100-pin VQFP (TQFP-100), 14 x 14 mm, 1 mm height, 0.5 mm pitch |
| Uri ng Pagpapasok | Surface Mount |
| Temperature na Operasyon | -40C to +100C (Industrial, I suffix) |
| Speed Grade | -2 |
| Soft CPU Support | Optional soft ARM support |
| Tindminan RoHS | Compliant (GREEN package per digchip listing) |
| Reprogrammability | Yes, in-system reprogrammable flash |
Gabay sa Pin Configuration ng A3P060-2VQG100I 100-pin vqfp (tqfp-100), 14 x 14 mm, 1 mm height, 0.5 mm pitch
Pin configuration para sa A3P060-2VQG100I (100-pin vqfp (tqfp-100), 14 x 14 mm, 1 mm height, 0.5 mm pitch package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa A3P060-2VQG100I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
A3P060-2VQG100I ay nararapat para sa 6 aplikasyons: CPLD Replacement and Glue Logic Consolidation, Industrial Control and Automation Boards, Portable and Handheld Instruments, Power Sequencing and System Management, Communications Line-Card Interface Logic, Automotive-Adjacent and Rugged Embedded Systems.
CPLD Replacement and Glue Logic Consolidation
The A3P060-2VQG100I fits this application because its flash-based, instant-on fabric behaves like a CPLD (no configuration delay, no external boot device) while offering 1536 logic cells and 18432 bits of dual-port SRAM - far beyond typical CPLD macrocell counts. Designers consolidate multiple 700-series CPLDs, discrete decoders, and bus-transceiver glue into one 14 x 14 mm chip, cutting BOM line items and board area. Typical circuits map address decoding, interrupt arbitration, and bus bridging onto VersaTiles with deterministic single-chip timing. Because configuration is nonvolatile, the board powers up functional within microseconds, preserving the CPLD-like bring-up behavior field service teams expect, while remaining fully reprogrammable in-system via JTAG for future revisions.
Inirekomenda
Industrial Control and Automation Boards
The industrial -40C to +100C rating and 310 MHz-class fabric make the A3P060-2VQG100I well suited to PLC I/O modules, motor-control sequencing panels, and factory sensor interfaces. Its 71 user I/Os support mixed-voltage banks (1.5V to 3.3V VCCI), directly interfacing 3.3V microcontrollers with 5V-tolerant-adjacent industrial signaling through proper level design. The 18432-bit dual-port SRAM implements FIFOs between slow field buses and fast local logic, while deterministic flash fabric avoids configuration glitches during brownouts - critical in environments with unstable power. Designers typically pair it with a small MCU for supervisory control; the FPGA handles timing-critical pulse trains, quadrature decoding, and safety interlocks with nanosecond-class latency that software cannot match.
Inirekomenda
Portable and Handheld Instruments
Battery-powered handheld meters, field testers, and portable dataloggers benefit from the A3P060-2VQG100I's low static power on the 130-nm flash process and its single-chip, no-boot-memory architecture that saves both board space and leakage. The compact 100-pin VQFP (14 x 14 mm, 1 mm height, 0.5 mm pitch) fits slim enclosures, and the industrial temperature grade tolerates hot vehicle cabins and cold outdoor use. Inside the instrument, the FPGA implements display timing, keypad scan, sensor-front-end timing, and battery-gauge glue logic while the host MCU sleeps. Because ProASIC3 keeps state-free instant-on startup, the instrument is measurement-ready the instant power is applied - an important user-experience and certification advantage over SRAM FPGAs that spend milliseconds loading configuration.
Inirekomenda
Power Sequencing and System Management
Multi-rail boards need sequencers that act before software runs; the A3P060-2VQG100I is live at power-up thanks to on-chip flash, making it an ideal single-chip power-sequencer, reset-tree manager, and hot-swap supervisor. Its fabric monitors POWER GOOD lines, enforces rail enable ordering with programmable delays implemented as counters, and generates precise resets for CPUs and ASSPs - all without any configuration-load window during which I/O pins would float. The 71 I/Os track dozens of enable, fault, and telemetry signals, while the 1.5V core keeps idle power minimal for always-on management functions. Field upgrades are performed through JTAG, letting one PCB design serve multiple product variants by loading different sequencing images at end-of-line programming.
Inirekomenda
Communications Line-Card Interface Logic
Networking line cards and backplane adapters use the A3P060-2VQG100I as bridge fabric between PHYs, MACs, and backplane connectors. The -2 speed grade supports the 310 MHz-class internal paths needed for deskewing and serialization of parallel interfaces, and 18432 bits of true dual-port SRAM implement elastic buffers and rate-matching FIFOs between clock domains. Industrial temperature availability suits telecom outdoor cabinets and uncooled remotes. The flash fabric eliminates the configuration PROM that would otherwise delay link bring-up after power events, improving link-recovery time specifications. Typical circuits map 8b/10b-adjacent framing glue, LED/status multiplexing, and hot-swap control; the 0.5 mm-pitch VQFP routes cleanly on cost-optimized four-layer cards used in volume network equipment.
Inirekomenda
Automotive-Adjacent and Rugged Embedded Systems
While the A3P060-2VQG100I is not AEC-Q100 qualified, its -40C to +100C industrial range and flash-based immunity to configuration corruption make it common in off-highway equipment, marine instrumentation, and rugged industrial vehicles where full automotive qualification is not contractually required. Vibration-tolerant VQFP gull-wing leads survive shock profiles better than ball-grid alternatives at repair time, and the single-chip design removes the configuration-flash solder joints that are common failure points in SRAM FPGA systems. Designs use the fabric for engine-interface pulse capture, CAN-adjacent glue, sensor conditioning timing, and watchdog supervision; dual-port SRAM buffers burst sensor data between interrupts. Libero SoC timing constraints guarantee worst-case timing across the full military-adjacent temperature span.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for A3P060-2VQG100I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | A3P060-2VQG100 | A3P060-VQG100I | A3P060-1VQ100 | A3P250L-1VQG100I |
|---|---|---|---|---|---|
| Package | 100-pin VQFP (TQFP-100) | 100-pin VQFP (TQFP-100) - same | 100-pin VQFP (TQFP-100) - same | 100-pin VQFP (TQFP-100) - same | 100-pin VQFP (TQFP-100) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| System Gates | 60000 | 60000 | 60000 | 60000 | 250000 |
| Logic Cells | 1536 | 1536 | 1536 | 1536 | 6144 |
| Speed Grade | -2 (up to 310 MHz class) | -2 | Standard | -1 | -1 |
| Operating Temperature | -40C to +100C (Industrial) | 0C to +70C (Commercial) | -40C to +100C (Industrial) | 0C to +70C (Commercial) | -40C to +100C (Industrial) |
| Configuration | On-chip flash, single-chip | On-chip flash, single-chip | On-chip flash, single-chip | On-chip flash, single-chip | On-chip flash, single-chip |
Pangunahing mga Pagkakaiba
- Fastest -2 speed grade in industrial temperature (kumpara saA3P060-VQG100I)
- Industrial -40C to +100C qualification (kumpara saA3P060-2VQG100)
- Single-chip instant-on flash configuration (kumpara saSRAM FPGAs (cross-brand))
Talaan ng Disenyo
Estimated: supply the 1.5V core rail with a regulator sized for peak dynamic current; static flash-fabric current is low, but dynamic current scales with clock rate and switching activity, so run Microchip's power calculator (in Libero SoC SmartPower) with your actual design VCD rather than assuming worst-case. Provide 0.1uF ceramic decoupling at every VCC/VCCI pin pair plus at least one 10uF bulk capacitor per rail. Keep VCCI banks at the lowest voltage that meets your I/O standard to minimize power.
The 0.5 mm pitch VQFP requires 4-mil trace/space with via-in-pad or dogbone fanout; a 4-layer stack (signal-GND-power-signal) simplifies return paths for the 310 MHz-class internal clocks appearing at I/O. Place the JTAG header within 15 cm of the device with series 33-ohm resistors on TDI/TMS/TCK for programming robustness. Reserve a footprint-compatible escape pattern that also accommodates A3P125/A3P250 100-VQFP variants for future density migrations without respin.
Do not substitute the commercial A3P060-2VQG100 into industrial applications: its 0C to +70C range will not cover -40C cold start, a common failure in field returns. Verify speed-grade timing in Libero SoC after any substitution (A3P060-VQG100I standard grade offers less timing margin than -2). Finally, remember that unused I/Os should be tied per datasheet recommendations (typically weak pull-down in flash FPGAs) to avoid floating-node EMI during EMC testing.
Impormasyon ng Pagsunod sa Kautusan
Distributor listings (digchip) describe the package as GREEN, indicating RoHS-compliant, lead-free construction. Industrial temperature grade is not automotive AEC-Q100 qualified. REACH and conflict-minerals status not stated in provided data.
