Analog Devices

AD526JNZ - Software PGA, 1-16x Gain | Analog Devices

MPN: AD526JNZ ✓ Nakahanda
16-pin PDIP Package
MOQ: 1 |

AD526JNZ Ulas

The Analog Devices AD526JNZ is a single-ended, monolithic software programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16, a bandwidth of 4 MHz, and a 16-pin PDIP package. It integrates a BiFET amplifier, a laser-trimmed resistor network, JFET analog switches, and TTL-compatible latched gain-control inputs.

A software programmable gain amplifier, or SPGA, is an amplifier whose gain can be selected through digital control signals. It sits between the instrumentation-amplifier and operational-amplifier categories, allowing a system to attenuate or amplify a small analog input without changing external resistors. The AD526JNZ supports automatic range control, signal conditioning, measurement systems, and instrumentation where several input levels must share one analog processing chain.

The AD526JNZ provides five binary gain selections covering a 1-to-16 multiplication range. Gain is stored in latches, so the selected setting can remain stable while the analog signal is processed. Its monolithic implementation combines the amplifier and precision resistor network on one IC, while TTL-compatible gain-code inputs simplify interfacing with digital control logic. The 4 MHz bandwidth supports signal paths that require useful bandwidth beyond low-frequency precision measurements.

Internally, the AD526 uses a drift-trimmed BiFET amplifier with low input bias current, a laser-trimmed resistor network for gain accuracy, and JFET analog switches to select the active resistance. These elements implement the five gain modes without requiring external matched resistors or discrete switch networks. Because the gain code is latched, the control inputs do not need to remain actively driven after a valid code is stored.

Typical uses include programmable sensor-frontend scaling, laboratory measurement equipment, automatic-range data acquisition, industrial process monitoring, and communications equipment that accepts signals over a wide dynamic range. Placing the AD526JNZ ahead of an ADC can reduce the likelihood that a large input saturates the converter while preserving resolution for smaller signals.

The principal design consideration is digital-control timing. Firmware must set the latched gain code before the analog signal is sampled, and the circuit should avoid changing gain while a conversion is in progress. Power-supply decoupling, grounding, and signal-routing practices also remain important because the AD526JNZ is designed as a sensitive analog block within an otherwise digital system.

This page combines the AD526JNZ product identity, programmable-gain architecture, verified ordering information, replacement considerations, application guidance, and engineering design notes. It is intended to help engineers evaluate signal-conditioning requirements before integrating the amplifier into a PCB.

Mga alternatibo na pwedeng ilagay na AD526JNZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD526JNZ (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type.

Analog Devices
Package: 16-CDIP
Product Type: Single-ended monolithic software-programmable gain amplifier
Ikabit sa AD526JNZ →

AD526JN

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Analog Devices
📦 16-pin PDIP
Single-ended monolithic software-programmable gain amplifier · 1, 2, 4, 8, and 16 · 5 · TTL-compatible latched inputs · Single-ended · 4.5 V to 16.5 V · 350 kHz · 0 °C to +70 °C

Magkontak para sa presyo

Tingnan ang Datasheet →

AD526JNZ Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Single-ended monolithic software programmable gain amplifier
Number of Circuits 1 circuit
Selectable Gain 1, 2, 4, 8, and 16
Maximum Gain 16x
Minimum Gain 1x
Bandwidth 4 MHz
Input Type Single-ended
Amplifier Technology BiFET
Resistor Network Laser-trimmed
Switch Technology JFET analog switches
Control Interface TTL-compatible latched inputs
External Components Required 0 components
Packhaging 16-pin PDIP
Package Pitch 7.62 mm
Style ng Pagpapasok Through-hole

Gabay sa Pin Configuration ng AD526JNZ 7.62 mm

Pin configuration para sa AD526JNZ (7.62 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 7.62 mm package para sa AD526JNZ

Wala ng detalyadong pinout data na magagamit para sa AD526JNZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD526JNZ ay nararapat para sa 6 aplikasyons: Programmable ADC Front End, Automatic-Range Sensor Conditioning, Industrial Process Measurement, Laboratory Instrumentation, Communications Signal Conditioning, Automatic Test and Measurement.

🔧

Programmable ADC Front End

The AD526JNZ fits an ADC input stage that must accommodate widely varying signal levels without changing external resistors. Its five selectable gains of 1x, 2x, 4x, 8x, and 16x let firmware attenuate a large input or amplify a smaller one before conversion. The 4 MHz bandwidth provides useful signal throughput, while the latched gain inputs simplify control from a microcontroller or FPGA. The design should set the gain code before each conversion and allow adequate settling time. Because the device is a single-ended amplifier, the source and ADC reference arrangement must provide a suitable common-mode range.

🧩

Automatic-Range Sensor Conditioning

The AD526JNZ is well suited to sensor interfaces in which the measured quantity can move across several orders of magnitude. A controller can select gains from 1x through 16x to keep the conditioned signal within a narrow ADC range, improving utilization of the converter rather than allowing one high-level input to determine the gain for every measurement. The integrated laser-trimmed resistor network and JFET switches provide a compact gain stage without external matched networks. Firmware should avoid gain changes during acquisition and should evaluate offset, settling, and noise performance for the particular sensor bandwidth.

🏭

Industrial Process Measurement

The AD526JNZ can serve as the programmable analog scaling stage in industrial process-monitoring equipment that accepts pressure, temperature, or current-derived signals. Digital gain selection makes it practical to establish different ranges for different transducers while retaining one analog signal path. The monolithic integration of the BiFET amplifier, trimmed resistor network, JFET switches, and latched controls reduces board area compared with a discrete implementation. Protective filtering should be placed ahead of the amplifier when sensors connect to long cables, and the grounding strategy must prevent switching or digital-control currents from entering the measurement reference.

⚡

Laboratory Instrumentation

The AD526JNZ is appropriate for laboratory instruments that need operator-selectable or software-controlled measurement ranges. Its 1x-to-16x gain range provides enough scaling flexibility for many low- and medium-frequency analog inputs, and the 4 MHz listed bandwidth handles signals beyond the slow range of a precision-only amplifier. The latched TTL-compatible controls allow the instrument controller to select a range and retain it during acquisition. For sensitive instrumentation, evaluate input bias current, offset voltage, noise, and gain error against the source impedance, then use clean grounding and short analog traces to preserve measurement integrity.

🌐

Communications Signal Conditioning

The AD526JNZ can provide programmable scaling ahead of a communications receiver when signal amplitude varies between operating states or channel conditions. Gain settings from 1x to 16x allow the receiver to preserve usable signal level without relying on a fixed attenuator network, while the 4 MHz bandwidth supports many baseband and control-signal paths. Latched gain control reduces repeated switching-command overhead. The amplifier remains a single-ended implementation, so system designers should account for single-ended signal sources, reference grounding, input bandwidth, and the maximum signal level accepted by the following stage when selecting a gain code.

🖥️

Automatic Test and Measurement

The AD526JNZ is useful in automated test equipment that applies several gain scales to an input or DUT response. A test controller can select 1x, 2x, 4x, 8x, or 16x to normalize the signal before an ADC or measurement engine evaluates it. This can simplify fixture calibration and reduce the need for multiple interchangeable attenuator boards. For high-speed production testing, establish a deterministic sequence that latches gain before each sample, includes settling delay, and prevents acquisition interruption. Verify input and output clipping limits as well as the amplifier's thermal and supply conditions.

What is the AD526JNZ and what does it do?
The AD526JNZ is a single-ended monolithic software programmable gain amplifier with selectable gains of 1, 2, 4, 8, and 16. According to the Analog Devices AD526 datasheet, it combines a BiFET amplifier, laser-trimmed resistor network, JFET analog switches, and TTL-compatible latched gain inputs in one 16-pin PDIP package. It therefore provides digital control of analog signal amplification without requiring an external resistor network.
What gain settings are available on the AD526JNZ?
The AD526JNZ supports five gain settings: 1x, 2x, 4x, 8x, and 16x. According to the Analog Devices AD526 datasheet, these settings are selected through latched digital inputs and implemented with an integrated laser-trimmed resistor network and JFET switches. The latched interface allows the selected gain to remain stable without continuous control-signal activity, which is useful in repeated data-acquisition systems.
What is the bandwidth of the AD526JNZ?
The AD526JNZ has a listed bandwidth of 4 MHz. This makes the device suitable for analog signal-conditioning paths that need more bandwidth than a slow precision-measurement amplifier, while its programmable scaling can protect a downstream converter from over-range inputs. The Analog Devices AD526 datasheet remains the governing reference for gain-versus-frequency behavior, settling, and other dynamic performance.
What package and pin count does the AD526JNZ use?
The AD526JNZ is supplied in a 16-pin PDIP package with 7.62 mm lead pitch. The Analog Devices product page and manufacturer datasheet identify the AD526 family as a monolithic programmable gain amplifier, while ordering information identifies AD526JNZ as the 16-PDIP configuration. Use the pin-description table in the manufacturer datasheet when assigning PCB traces and connector signals.
Where can I download the AD526JNZ datasheet PDF?
The official AD526JNZ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD526.pdf. It describes the product architecture, gain settings, latched control interface, application information, electrical characteristics, and pin assignments for the AD526 family. The manufacturer datasheet should be used as the primary reference for final PCB and signal-integrity decisions.
Does the AD526JNZ require external gain-setting resistors?
No, the AD526JNZ requires no external components for its gain function. According to the Analog Devices AD526 datasheet, the amplifier, laser-trimmed resistor network, JFET analog switches, and gain-code latches are integrated monolithically. This reduces board area and component count, although normal bypass capacitors, grounding, signal routing, and output-loading measures are still required in the application.
Can AD526JNZ be used with TTL control signals?
Yes, the AD526JNZ uses TTL-compatible latched inputs for gain-code control. According to the Analog Devices AD526 datasheet, these inputs allow the selected gain to be stored and retained for subsequent analog processing. Firmware should still validate the control sequence and avoid changing the gain during a critical sampling interval, especially when the downstream ADC is acquiring a conversion.
What is the AD526JNZ vs AD526JN difference?
AD526JNZ and AD526JN are closely related AD526 catalog entries, but the indexed ordering records do not fully expose every suffix-specific rating. Both are identified with the same 1x-to-16x programmable-gain architecture, and AD526JN appears as an AD526-family alternative. Before replacing AD526JNZ with AD526JN, verify package, temperature range, supply limits, and gain accuracy in the manufacturer ordering guide and datasheet.
What is the best drop-in replacement for AD526JNZ?
The closest documented same-family replacement candidate is AD526JN, because both belong to the AD526 monolithic programmable-gain-amplifier family and the indexed records describe the same five gain selections. Its package and temperature-grade suffix should be checked before substitution. Use the Request a Quote form on this page when you need confirmation for an exact PCB revision, quantity, or sourcing schedule.
Can a cross-brand amplifier replace the AD526JNZ?
No cross-brand, pin-compatible AD526JNZ replacement was confirmed by the manufacturer and distributor records reviewed for this product. A cross-brand amplifier with a similar gain range may still differ in control logic, latching behavior, pin assignment, bandwidth, noise, or supply requirements. Request a Quote with the required pinout, gain-code timing, electrical limits, and target application so an equivalent can be evaluated responsibly.
When should I choose AD526JNZ over a discrete gain network?
Choose the AD526JNZ when the design requires digitally selectable gains of 1x, 2x, 4x, 8x, or 16x and board space is constrained. Its integrated BiFET amplifier, trimmed resistor network, JFET switches, and latched logic provide a complete gain stage in one package. A discrete network may offer different noise or cost characteristics, but it requires more components, switching design, and resistor-matching effort.
Is the AD526JNZ suitable for sensor and ADC signal conditioning?
The AD526JNZ is suitable for many sensor and ADC front ends that require programmable analog scaling. Its 1x-to-16x gain range lets a system attenuate large signals before conversion and amplify smaller signals to improve use of the ADC range. Check the sensor source impedance, ADC input range, required settling time, and maximum allowable gain error before selecting the operating mode.
How should gain changes be sequenced in an ADC measurement system?
Set and latch the AD526JNZ gain code before starting the ADC conversion. According to the Analog Devices AD526 datasheet, the gain code is stored by latched control inputs, allowing the analog gain to remain fixed during measurement. Account for amplifier settling and switch-related transients in the acquisition sequence, and avoid changing gain during a sample-and-hold or conversion window.
Where can I buy AD526JNZ and what is its current price?
The AD526JNZ can be requested through the Request a Quote form on this page for current pricing, stock, minimum order quantity, and lead-time confirmation. The form is the appropriate route for a quotation because component pricing and availability can change with quantity, date, and supply conditions. Provide the exact AD526JNZ MPN and required quantities when submitting the request.
What are the key specifications of AD526JNZ that engineers should know?
The key AD526JNZ specifications are five programmable gains of 1x, 2x, 4x, 8x, and 16x, a 4 MHz bandwidth, single-ended operation, TTL-compatible latched control, and a 16-pin PDIP package. According to the Analog Devices AD526 datasheet, the IC integrates a BiFET amplifier, a laser-trimmed resistor network, and JFET analog switches. These parameters define its suitability for compact programmable analog-signal conditioning.

Impormasyon ng Talumpati sa Engineering for AD526JNZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD526JNZ when a design needs a compact, single-ended programmable gain stage with five binary settings from 1x to 16x, latched digital control, and a listed 4 MHz bandwidth. It is especially useful ahead of an ADC, in automatic-range sensor interfaces, and in test equipment that changes measurement scale under software control. AD526JN is the closest documented same-family candidate and should be considered when its exact suffix ratings, package details, and sourcing status meet the design requirements. A discrete resistor-and-switch network may be preferable when the design requires a continuous gain range, unusual impedance values, or independently optimized noise, but it requires additional board area and matching effort. Cross-brand alternatives should be selected only after verifying the complete pin assignment, control timing, input range, output range, bandwidth, and stability with the intended source and load.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD526JN
Package 16-pin PDIP 16-pin PDIP
Brand Analog Devices Analog Devices
Product Type Software programmable gain amplifier Software programmable gain amplifier
Selectable Gain 1x, 2x, 4x, 8x, and 16x 1x, 2x, 4x, 8x, and 16x
Bandwidth 4 MHz 4 MHz
Input Configuration Single-ended Single-ended
Control Interface TTL-compatible latched inputs TTL-compatible latched inputs
External Gain Components 0 components 0 components
Lead Pitch 7.62 mm 7.62 mm

Pangunahing mga Pagkakaiba

  • Five programmable gains integrated into one monolithic amplifier (kumpara saAD526JN)
  • Digital gain selection with retained settings (kumpara saAD526JN)
  • Complete integrated signal-gain function (kumpara saAD526JN)

Talaan ng Disenyo

Latch the gain code before starting each ADC conversion and do not change it while the converter is sampling. The AD526JNZ stores its gain setting, but the analog path still requires normal settling after a gain transition. Define a deterministic control sequence, include the required acquisition delay, and verify settling at the highest operating frequency and signal amplitude used by the design.

Place the amplifier and its bypass capacitors near the associated power and signal pins, and keep the analog input path short and away from digital switching nodes. Route the latched gain-control traces away from sensitive input and output tracks. For a through-hole 16-pin PDIP design, preserve a quiet analog ground reference and avoid sharing high-current return paths with the amplifier's measurement signal.

The AD526JNZ is a single-ended amplifier, so source impedance, input offset, gain accuracy, and output loading can affect the usable signal range. Check the source impedance against the BiFET input characteristics, confirm that the selected gain does not overdrive the next stage, and include the 4 MHz bandwidth when designing filters or cable compensation. Simulate the complete signal chain rather than relying only on nominal gain values.

Use the manufacturer's recommended bypass-capacitor arrangement and maintain a stable low-noise supply at the amplifier pins. Keep supply-loop current out of the analog input reference and avoid long shared return paths between the AD526JNZ and sensitive sensors. Confirm the exact supply-voltage limits and power-consumption values from the AD526 datasheet before finalizing the rail and thermal design.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The indexed AD526JNZ records do not state a specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD526JNZ datasheet AD526JNZ datasheet pdf AD526JNZ pinout AD526JNZ equivalent AD526JNZ replacement AD526JNZ vs AD526JN AD526JNZ 4 MHz amplifier AD526JNZ 16-pin PDIP Analog Devices AD526JNZ AD526JNZ programmable gain amplifier AD526JNZ ADC signal conditioning AD526JNZ price

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD526JNZ AD526JN AD526 software programmable gain amplifier SPGA programmable gain amplifier BiFET amplifier laser-trimmed resistor network JFET analog switches TTL-compatible gain latches single-ended amplifier instrumentation amplifier operational amplifier analog signal conditioning ADC front end automatic-range sensor measurement 4 MHz bandwidth 16-pin PDIP 7.62 mm lead pitch gain settings RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ