Analog Devices

AD585JP Precision Sample-and-Hold Amplifier | Analog Devices

MPN: AD585JP ✗ Tapus ng Buhay
1 matched application-resistor network Rds(on) 20-pin PLCC Package
MOQ: 1 |

AD585JP Ulas

The Analog Devices AD585JP is a monolithic precision sample-and-hold amplifier with one sampling circuit in a 20-pin PLCC package measuring 9 mm by 9 mm. It combines a high-performance operational amplifier, an ultralow-leakage analog switch, a FET-input integrating amplifier, an internal holding capacitor, and matched application resistors. This integrated signal path is designed for fast 10-bit and 12-bit data-acquisition systems that require short acquisition time, low sample-to-hold offset, and low hold droop.

A sample-and-hold amplifier is an analog signal-conditioning component that samples an input voltage during a controlled interval and then stores that voltage for later processing. It belongs to the amplifier IC family and the broader analog signal-acquisition hierarchy. By combining the sampling switch, amplifier, and holding capacitor in one monolithic implementation, the AD585JP reduces the number of separately matched discrete elements needed in a precision acquisition channel.

The central features of the AD585JP are its integrated high-performance operational amplifier, ultralow-leakage sampling switch, and FET-input integrating amplifier. The internal holding capacitor and matched application resistors are important because their integration supports accurate sample acquisition and flexible application design. The one-circuit configuration simplifies the external signal path while preserving the control required by high-speed data converters.

Technically, the AD585JP performs two distinct functions in each acquisition cycle. During acquisition, the analog switch connects the input to the internal sampling network, allowing the holding capacitor to charge toward the sampled voltage. During hold, the switch isolates the stored charge so that the amplifier can present a stable signal to the following converter or instrumentation circuitry. Low leakage limits charge loss during hold, while matched resistors reduce errors associated with the sampling network.

The AD585 is particularly suited to precision, high-speed 10-bit and 12-bit data-acquisition systems. Typical uses include multiplexed analog measurement systems, instrumentation front ends, laboratory data loggers, and signal-processing subsystems in which each converted sample must be captured and held with minimal acquisition or droop error. Its monolithic construction is especially useful where component matching, compact implementation, and repeatable system behavior are important.

A key design consideration is the relationship between acquisition time and source impedance. The source presented to the input must be capable of charging the internal holding capacitor through the complete acquisition interval. PCB layout should preserve short, low-noise input paths, while power-supply bypass capacitors should be positioned close to the device. Timing control must ensure that the hold command occurs only after the acquisition interval has elapsed and that the hold duration remains within the circuit droop limits.

This product record combines the AD585JP architecture and package information with practical implementation guidance, application context, and a structured path for evaluating replacement decisions. It is intended to help engineers establish the correct operating conditions, interface requirements, and PCB footprint before integrating the sample-and-hold amplifier into a precision measurement system.

Mga alternatibo na pwedeng ilagay na AD585JP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

AD585JP Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Sample-and-hold amplifier
Circuit Count 1 circuit
Packhaging 20-pin PLCC
Package Dimensions 9 mm x 9 mm
Uri ng Pagpapasok Surface mount
Architecture Operational amplifier, ultralow-leakage analog switch, and FET-input integrating amplifier
Internal Holding Capacitor 1 integrated holding capacitor
Matched Application Resistors 1 matched application-resistor network
Hanay ng Temperature na Operasyon 0°C to +70°C
Input Type FET input
Signal Path Series-coupled operational amplifier, analog switch, and integrating amplifier

Gabay sa Pin Configuration ng AD585JP 9 mm x 9 mm

Pin configuration para sa AD585JP (9 mm x 9 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 9 mm x 9 mm package para sa AD585JP

Wala ng detalyadong pinout data na magagamit para sa AD585JP.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD585JP ay nararapat para sa 6 aplikasyons: High-Speed Data Acquisition, Precision Instrumentation, Multiplexed Analog Measurement, Laboratory Data Logging, Signal-Conditioning Front End, Industrial Control and Automation.

📊

High-Speed Data Acquisition

The AD585JP fits the front end of a high-speed 10-bit or 12-bit data-acquisition system because it combines a high-performance operational amplifier, an ultralow-leakage analog switch, and a FET-input integrating amplifier with an internal holding capacitor. The matched application resistors and monolithic construction reduce the number of discrete elements involved in the sampling path. Place the acquisition timing between the source and the following ADC so that the input has settled before the hold command is issued, and maintain the required acquisition interval throughout the operating range.

🔬

Precision Instrumentation

The AD585JP is suitable for precision instrumentation in which a measured analog signal must be captured and held before digitization. Its ultralow-leakage analog switch helps preserve the stored voltage during hold, while the integrated holding capacitor and matched application resistors support coordinated sampling behavior. The 20-pin PLCC package permits a compact analog section, although the source impedance must be low enough to complete acquisition within the available timing window and the input path should be shielded against interference.

🔧

Multiplexed Analog Measurement

In a multiplexed analog measurement system, the AD585JP can provide the sampling and isolation function between a selected input and a downstream converter or measurement block. The internal switch separates the held voltage from the source during the hold interval, reducing the need for a separate hold capacitor and matching network. The design must allocate sufficient time for acquisition after each channel selection, account for switch-related timing, and keep channel-switching transients from coupling into the sensitive input and hold nodes.

🖥️

Laboratory Data Logging

The AD585JP can support laboratory data-logging channels that require a stable analog value during conversion or subsequent processing. Its integrated high-performance operational amplifier, internal holding capacitor, and matched resistors create a compact sample-and-hold stage suitable for precision 10-bit and 12-bit acquisition tasks. For slow logging systems, verify droop over the longest intended hold duration and keep the input conditioned so that leakage, settling, and acquisition errors remain below the measurement budget.

📡

Signal-Conditioning Front End

The AD585JP is appropriate for a precision signal-conditioning front end that must present a stable sample to an ADC, comparator, or digital processing stage. Its series-coupled operational amplifier, analog switch, and FET-input integrating amplifier perform the basic acquisition function without requiring a separately assembled sample-and-hold network. Place the device close to the converter when possible, use a low-noise reference and bypass strategy, and validate the complete acquisition interval against the converter’s sampling requirement.

🏭

Industrial Control and Automation

The AD585JP can be used in a controlled industrial measurement interface when the required internal temperature range and analog timing are acceptable. Its integrated sampling path is useful for capturing a conditioned process or sensor signal before downstream conversion. The 0°C to +70°C operating range restricts use to appropriately conditioned commercial environments. Engineers should verify long-term droop, input leakage effects, acquisition settling, and power-supply behavior across the complete system operating condition.

What is the AD585JP?
The AD585JP is a monolithic precision sample-and-hold amplifier from Analog Devices. It combines a high-performance operational amplifier, an ultralow-leakage analog switch, a FET-input integrating amplifier, an internal holding capacitor, and matched application resistors in one 20-pin PLCC package. According to the Analog Devices AD585 datasheet, this integrated arrangement is intended for high-speed 10-bit and 12-bit data-acquisition systems requiring fast acquisition, low sample-to-hold offset, and low hold droop.
What package does the AD585JP use?
The AD585JP uses a 20-pin PLCC package measuring 9 mm by 9 mm. The Analog Devices product information identifies AD585JP as a one-circuit sample-and-hold amplifier in the 20-PLCC package. Because the PLCC-20 footprint is not represented by the product-page package diagram library, the pin diagram should be checked against the Analog Devices AD585 datasheet before assigning PCB land patterns, traces, or component orientation.
Where can I download the AD585JP datasheet PDF?
The official AD585 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD585.pdf. The document describes the monolithic sampling architecture, internal holding capacitor, matched application resistors, electrical characteristics, and application information. Use the manufacturer document for connection details, timing limits, and the definitive PLCC-20 pin descriptions when designing or replacing AD585JP devices.
Where can I find the AD585JP pinout?
The AD585JP pin assignments are found in the pin-description table and package drawing of the official Analog Devices AD585 datasheet. The AD585JP has 20 PLCC pins, but the product-page package diagram library does not contain a matching PLCC-20 drawing. Assign PCB connections from the manufacturer pin table rather than relying on a generic package illustration, and verify orientation against the package drawing before fabrication.
What are the key specifications of AD585JP that engineers should know?
The key AD585JP specifications are its one-circuit monolithic sample-and-hold architecture, 20-pin PLCC package, 9 mm by 9 mm body size, and 0°C to +70°C commercial temperature range. According to the Analog Devices AD585 datasheet, the circuit integrates a high-performance operational amplifier, an ultralow-leakage analog switch, a FET-input integrating amplifier, an internal holding capacitor, and matched application resistors for precision 10-bit and 12-bit acquisition systems.
Why is the AD585JP suitable for 12-bit data acquisition?
The AD585JP is suitable for 12-bit data acquisition because its integrated acquisition circuit is specifically described for high-speed 10-bit and 12-bit systems. Its operating amplifier, ultralow-leakage switch, FET-input integrating amplifier, internal holding capacitor, and matched resistors are coordinated to support accurate sampling and stable hold behavior. Conversion accuracy still depends on the ADC, source impedance, acquisition timing, layout, and system noise.
How does the AD585JP sample and hold a signal?
The AD585JP uses its internal analog switch to connect the input to the integrating and holding network during acquisition, allowing the internal capacitor to charge toward the input voltage. During hold, the switch isolates the stored charge so the amplifier can maintain a stable output for the downstream ADC or processing circuit. The Analog Devices AD585 datasheet identifies this as the core operating principle of the monolithic sample-and-hold circuit.
What source impedance is suitable for the AD585JP?
The AD585JP source must settle the internal holding capacitor completely within the allotted acquisition interval. The correct maximum source impedance depends on acquisition time, capacitor value, required accuracy, and switch-leakage conditions defined in the Analog Devices AD585 datasheet. Drive the input from a low-impedance buffer when the external source cannot charge the internal capacitor accurately within the acquisition window.
Does the AD585JP need an external holding capacitor?
The AD585JP includes an internal holding capacitor, so the core sample-and-hold function does not depend on an external reservoir capacitor. The official Analog Devices AD585 datasheet describes the integrated capacitor together with matched application resistors. External passive components may still be required for filtering, termination, decoupling, or protection according to the application circuit; their values should be selected from the datasheet guidance rather than assumed.
What is the operating temperature range of AD585JP?
The AD585JP is specified for a 0°C to +70°C operating temperature range. This is a commercial-temperature-grade device, so it is not appropriate for unrestricted industrial temperature operation or automotive temperature ranges without additional qualification. Confirm the complete operating and storage limits in the official Analog Devices AD585 datasheet and review system-level thermal conditions before deployment.
Where to buy AD585JP online?
Use the Request a Quote form on this page to request AD585JP availability, lead time, order quantity, and commercial terms. The form allows purchasing teams to obtain a current response without relying on stale listing information. Before ordering, state the required AD585JP package and grade, because the orderable suffix identifies the 20-pin PLCC configuration and operating-temperature range.
What is the price of AD585JP?
The current commercial price for AD585JP should be requested through the Request a Quote form on this page. The form records the exact quantity, delivery requirements, and target market needed for an appropriate quotation. For legacy inventory, provide the manufacturer part number, package, and required quality documentation so the sourcing team can match the correct physical configuration.
What is the lead time for AD585JP?
The current AD585JP lead time should be confirmed through the Request a Quote form on this page. Submit the required quantity, delivery location, date needed, and any assembly or traceability requirements. Because AD585JP is a legacy-orderable designation, buyers should request both available stock and production or transfer options rather than assuming a standard catalog replenishment schedule.
Is AD585JP in stock?
AD585JP stock status should be checked by submitting the required quantity through the Request a Quote form on this page. The quotation response can confirm available inventory, supported order quantities, and expected delivery timing. Include the complete manufacturer part number AD585JP and the required 20-pin PLCC configuration when requesting the current supply position.
What can replace AD585JP?
A valid replacement for AD585JP must use the same 20-pin PLCC footprint, preserve the sample-and-hold timing, leakage, acquisition, droop, supply-voltage, and output-range characteristics, and support the required 0°C to +70°C environment. The available cross-reference results do not identify a verified pin-compatible substitute, so no replacement should be selected without a manufacturer comparison and complete review of the official AD585 datasheet.
When should I choose the AD585JP over another sample-and-hold amplifier?
Choose the AD585JP when the design specifically requires its integrated precision sample-and-hold architecture in a 20-pin PLCC package. Its internal holding capacitor, matched application resistors, ultralow-leakage switch, and high-performance amplifier simplify a channel intended for high-speed 10-bit and 12-bit data acquisition. Select another device only when its pinout, acquisition timing, droop, leakage, supply range, and temperature rating are verified as equivalent or better.
Is AD585JP the same as the base AD585 device?
AD585JP is the orderable Analog Devices designation for the 20-pin PLCC, 0°C to +70°C configuration of the AD585 family, but a bare family name is not sufficient for purchasing or PCB design. Confirm the package suffix, pinout, temperature grade, and electrical limits against the Analog Devices ordering information. Use the complete AD585JP designation when placing an order or requesting a replacement.

Impormasyon ng Talumpati sa Engineering for AD585JP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD585JP when an existing precision acquisition design requires the original 20-pin PLCC sample-and-hold interface or a new design specifically targets the AD585’s monolithic architecture. It is particularly appropriate for 10-bit and 12-bit systems that need an integrated hold capacitor, matched application resistors, and low-leakage sampling switch. The device is constrained to a 0°C to +70°C operating range, so it should not be selected for wider industrial or automotive environments without a suitable qualified alternative. Because the cross-reference search did not establish a pin-compatible substitute, any replacement must be selected only after its PLCC-20 pinout, acquisition time, droop, leakage, supply range, output behavior, and temperature rating have been compared with the AD585 datasheet. A same-package device that does not preserve all of these characteristics is not a drop-in replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Package 20-pin PLCC (9 mm x 9 mm)
Brand Analog Devices
Product Type Monolithic sample-and-hold amplifier
Circuit Count 1 circuit
Operating Temperature Range 0°C to +70°C
Mounting Type Surface mount
Integrated Holding Capacitor Yes
Matched Application Resistors Yes
Sampling Switch Ultralow-leakage analog switch
Input Stage FET-input integrating amplifier

Pangunahing mga Pagkakaiba

  • Complete monolithic sampling architecture (kumpara saDiscrete sample-and-hold implementation)
  • Designed for 10-bit and 12-bit acquisition systems (kumpara saGeneral-purpose slow sampling circuit)
  • Integrated low-leakage hold path (kumpara saExternally assembled switch-and-capacitor holder)

Talaan ng Disenyo

Do not shorten the acquisition interval unless the source can fully settle the internal holding capacitor. Acquisition time, source impedance, capacitance, and switch behavior determine how closely the held voltage represents the input. Use a low-output-impedance buffer when necessary and validate settling at the required conversion accuracy. The Analog Devices AD585 datasheet provides the timing and application framework needed for this check.

Keep the signal input, hold node, and associated return paths short and separated from switching and digital routes. Place supply-bypass components close to the device pins and use a compact, low-loop-layout connection to the source buffer. The package includes a sensitive internal holding network, so unnecessary copper area and long high-impedance traces can increase coupling and make the sampling behavior less repeatable.

Treat the hold duration as a droop budget rather than an unlimited storage interval. The switch leakage and internal capacitance determine how quickly the stored voltage changes, so compare the maximum required hold time with the allowable settling error. For slower systems, periodically refresh the sample or choose a lower-leakage sampling architecture. Verify the complete channel behavior with the actual source impedance and cable or PCB leakage environment.

Confirm the device supply limits, bypass capacitance, and startup sequence against the official AD585 datasheet before assigning power rails. Follow the manufacturer’s grounding and decoupling arrangement because improper supply bypassing can couple noise into the held voltage and undermine the benefit of the integrated low-leakage sampling switch. Keep analog and return connections consistent with the complete acquisition timing test.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available product pages do not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because AD585JP is a commercial-temperature analog IC rather than an automotive-qualified device.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD585JP datasheet AD585JP datasheet pdf AD585JP pinout AD585JP specifications AD585JP application circuit AD585JP equivalent AD585JP replacement AD585JP cross reference AD585JP PLCC-20 footprint AD585JP price AD585JP stock Analog Devices AD585JP

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD585JP AD585 sample-and-hold amplifier sample-and-hold circuit operational amplifier ultralow-leakage analog switch FET-input integrating amplifier internal holding capacitor matched application resistors PLCC-20 surface mount 10-bit data acquisition 12-bit data acquisition acquisition time sample-to-hold offset hold droop input leakage precision instrumentation analog-to-digital converter multiplexed analog measurement signal-conditioning front end commercial temperature grade RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ