Analog Devices

AD621ANZ - Low-Drift Instrumentation Amplifier | Analog Devices

MPN: AD621ANZ ✓ Nakahanda
1.3 mA Vdss 500 pA Id 8-pin PDIP (0.300 inch, 7.62 mm pitch) Package
MOQ: 1 |

AD621ANZ Ulas

The Analog Devices AD621ANZ is a low-drift, low-power instrumentation amplifier with a bandwidth of 800 kHz, a slew rate of 1.2 V/µs, and a maximum supply current of 1.3 mA, packaged in an 8-pin PDIP. The device is designed for precision measurement systems that must amplify small differential signals while rejecting common-mode interference.

An instrumentation amplifier is a specialized analog amplifier optimized for sensor and measurement inputs. Its internal differential-input, gain-setting, and output stages provide accurate amplification of low-level signals from strain gauges, thermocouples, pressure sensors, and bridge networks. Unlike a general-purpose operational amplifier configured for differential input, a dedicated instrumentation amplifier is designed to offer high input impedance, controlled gain, and strong common-mode rejection in a compact circuit.

The AD621ANZ combines low power consumption with precision-oriented performance. Its stated bandwidth is 800 kHz, its input bias current is 500 pA, and its input offset voltage is 75 µV. A 1.2 V/µs slew rate supports accurate reproduction of changing analog signals. The Analog Devices product page describes the AD621 family as suitable for portable or remote systems where size, weight, and power dissipation are important.

The AD621 uses a three-op-amp instrumentation-amplifier architecture to amplify differential sensor signals. Its operating supply range is listed as -40°C to +85°C for the AD621ANZ package variant, and the device is offered in an 8-lead plastic DIP configuration. The low-drift, low-power design makes the amplifier particularly suitable for precision data-acquisition systems, including weigh-scale and general transducer-interface circuits.

Typical uses include weighing systems, industrial process monitoring, portable measurement instruments, biomedical instrumentation, and low-level sensor acquisition. For bridge-based sensors, the instrumentation amplifier converts a small differential bridge voltage into a larger single-ended signal while attenuating common-mode voltage present at both inputs. Its 1.3 mA maximum supply current is especially useful in battery-operated or remotely powered equipment.

Design the AD621ANZ with a clean, decoupled supply and route the input and output signals away from high-current switching paths. The gain-setting network, input filter, and reference-voltage connection determine practical system accuracy, so component tolerances and thermal gradients should be evaluated together. A prototype should also confirm that the selected gain and signal bandwidth provide adequate settling time before sampling.

This product page combines the manufacturer’s device description with package information, operating characteristics, sourcing details, drop-in replacement guidance, comparison parameters, and practical application notes. It is intended to help engineers determine whether the AD621ANZ fits a precision instrumentation-amplifier requirement before committing to a board layout or production BOM.

Mga alternatibo na pwedeng ilagay na AD621ANZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD621ANZ (parehas na form factor at footprint) — pagkakaiba sa Package, Minimum Common-Mode Rejection, Product Type, Architecture, Gain Range.

Analog Devices
Package: 8-lead PDIP
Product Type: Low-cost, low-power, high-accuracy instrumentation amplifier
Gain Range: 1 to 10,000
Ikabit sa AD621ANZ →
Texas Instruments
Package: 8-pin PDIP
Minimum Common-Mode Rejection: 115 dB
Architecture: Three-op-amp instrumentation amplifier
Ikabit sa AD621ANZ →
Texas Instruments
Package: 8-pin PDIP (P)
Gain Range: 5 V/V to 10,000 V/V
Ikabit sa AD621ANZ →
Texas Instruments
Package: 8-pin PDIP
Minimum Common-Mode Rejection: 120 dB
Product Type: Precision instrumentation amplifier
Ikabit sa AD621ANZ →
Texas Instruments
Package: 8-pin plastic DIP
Minimum Common-Mode Rejection: 117 dB
Architecture: Three-op-amp instrumentation-amplifier design
Ikabit sa AD621ANZ →

AD621BN

✅ Drop-In
Analog Devices
📦 PDIP-8
Single-channel instrumentation amplifier · 1 circuit · 1.3 mA maximum · 8-pin plastic DIP (8-PDIP) · 8-pin SOIC, 8-pin plastic DIP, or 8-pin ceramic DIP · Through-hole · External resistor between gain-setting pins

Magkontak para sa presyo

Tingnan ang Datasheet →

AD620ANZ

✅ Drop-In
Analog Devices
📦 PDIP-8
Low-cost, low-power, high-accuracy instrumentation amplifier · 1 channel · 1 to 10,000 · One external resistor · 1 MHz · 1.3 mA · 2 nA

Magkontak para sa presyo

Tingnan ang Datasheet →

INA141P

✅ Drop-In
Texas Instruments
📦 PDIP-8
Precision, low-power instrumentation amplifier · 10 and 100 V/V · 50 µV · 0.5 µV/°C · 5 nA · 117 dB · ±40 V · ±18 V

Magkontak para sa presyo

Tingnan ang Datasheet →

INA114AP

✅ Drop-In
Texas Instruments
📦 PDIP-8
Precision instrumentation amplifier · 1 circuit · 1 MHz · 50 µV · 0.25 µV/°C · 11 nV/√Hz · 2 nA · 115 dB

Magkontak para sa presyo

Tingnan ang Datasheet →

INA128PA

✅ Drop-In
Texas Instruments
📦 PDIP-8
Precision instrumentation amplifier · Three-op-amp instrumentation amplifier · 1 circuit · 8-pin PDIP · 130 dB · 120 dB · 700 µA · 50 µV

Magkontak para sa presyo

Tingnan ang Datasheet →

AD621ANZ Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Instrumentation Amplifier
Number of Circuits 1 circuit
Packhaging 8-pin PDIP (0.300 inch, 7.62 mm pitch)
Uri ng Pagpapasok Through-hole
Packaging Type Tube
Small-Signal Bandwidth 800 kHz at -3 dB
Slew Rate 1.2 V/µs
Maximum Supply Current 1.3 mA
Input Bias Current 500 pA
Input Offset Voltage 75 µV
Hanay ng Temperature na Operasyon -40°C to +85°C
Halogen-Free Status Compliant

Gabay sa Pin Configuration ng AD621ANZ 8-pin pdip (0.300 inch, 7.62 mm pitch)

Pin configuration para sa AD621ANZ (8-pin pdip (0.300 inch, 7.62 mm pitch) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin pdip (0.300 inch, 7.62 mm pitch) package para sa AD621ANZ

Wala ng detalyadong pinout data na magagamit para sa AD621ANZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD621ANZ ay nararapat para sa 6 aplikasyons: Precision Weigh-Scale Signal Conditioning, Industrial Pressure Transducer Interface, Portable Medical Signal Acquisition, Battery-Powered Data Acquisition, Thermocouple and Low-Level Sensor Interface, Remote Environmental Monitoring.

⚖️

Precision Weigh-Scale Signal Conditioning

The AD621ANZ fits precision weigh-scale channels because it amplifies the small differential voltage produced by a strain-gauge bridge while rejecting common-mode excitation voltage. Its stated input bias current of 500 pA limits loading on high-resistance bridge arms, while the 75 µV input offset specification helps define the achievable low-level measurement accuracy. The 1.3 mA maximum supply current also supports compact or battery-assisted weighing equipment. In implementation, place the amplifier close to the bridge, decouple its supply rails, and calculate the gain so that the largest possible bridge imbalance plus bridge output does not exceed the amplifier’s input common-mode limits. Board temperature gradients and strain-gauge self-heating should also be included in the final error budget.

🏭

Industrial Pressure Transducer Interface

The AD621ANZ is appropriate for low-level pressure and force transducers that generate a differential output near a common-mode reference voltage. Its 800 kHz -3 dB bandwidth supports signal acquisition beyond static DC measurement, while the 1.2 V/µs slew rate helps preserve amplitude and phase accuracy for rapidly changing forces. The device’s 500 pA input bias current is useful when the sensor output impedance is high. Place a protected input network close to the amplifier pins, reference the output around the system’s mid-supply level, and isolate high-current motor or relay switching. Before selecting the gain, confirm that bridge excitation, output offset, common-mode excursion, and ADC input range remain within the AD621ANZ operating limits over the full pressure range.

💊

Portable Medical Signal Acquisition

The AD621ANZ can serve as the first analog stage for low-level biomedical sensor signals when battery operation and compactness are important. Its maximum supply current of 1.3 mA reduces the power budget for wearable or portable acquisition, while the 75 µV input offset specification establishes a useful starting point for millivolt-level front-end design. Place the device close to the sensor connector, use guarded input routing to limit leakage, and separate sensitive input traces from display, switching-converter, and wireless-drive currents. The design must verify input bias-current error, common-mode range, noise performance, and electrode or sensor excitation requirements. Clinical applications also require system-level validation of isolation, leakage, and applicable regulatory controls beyond the IC specifications.

🖥️

Battery-Powered Data Acquisition

The AD621ANZ is well matched to battery-powered multi-channel data-acquisition modules because the manufacturer highlights a maximum supply current of 1.3 mA and low power consumption. Its 800 kHz -3 dB bandwidth provides useful signal range for sensor monitoring, while the 500 pA input bias current reduces errors with high-impedance sources. In a multichannel design, use a clean low-noise supply, provide local bypass capacitance at the device, and stagger sensor excitation to control power-hungry channels. Choose the gain and sampling rate together so that the instrumentation amplifier settles before each conversion. The system-level power budget should also include sensor excitation, references, ADC, and leakage paths; the AD621ANZ’s own 1.3 mA maximum is only one portion of the complete acquisition-channel power consumption.

🌡️

Thermocouple and Low-Level Sensor Interface

The AD621ANZ can amplify small differential sensor outputs when the design also manages input bias-current error, offset, and common-mode limits. Its 500 pA input bias current is helpful with high-impedance sources, while the specified 75 µV offset provides a reference for the overall error calculation. Thermocouple systems commonly require input filtering, cold-junction compensation, and protection against large transient voltages, so those functions should surround rather than replace the instrumentation amplifier. Route the differential pair as a compact, balanced pair, keep them away from switching nodes, and use a stable reference network at the output. Verify the selected gain against the sensor’s full output range and confirm that the amplifier remains within its valid common-mode window during startup and sensor disconnection.

🧩

Remote Environmental Monitoring

The AD621ANZ supports remote environmental monitoring systems that combine low-power operation with accurate amplification of small sensor outputs. Its 1.3 mA maximum supply current helps conserve energy in solar- or battery-powered installations, and the 800 kHz -3 dB bandwidth provides margin for sensors whose output changes during measurement. Place the amplifier near the sensor to minimize susceptible input routing, provide local supply bypassing, and protect the input path from moisture and electrostatic discharge. The system designer should evaluate gain accuracy, offset drift, noise, and the available output span for the full environmental range. A remote node should also include a controlled shutdown strategy or rail sequencing where the sensor and transmitter require ordered startup, because the AD621ANZ power saving alone does not solve input settling during power transitions.

What is the AD621ANZ?
The AD621ANZ is a single-circuit, low-drift instrumentation amplifier from Analog Devices packaged in an 8-pin PDIP. According to the Analog Devices AD621 product page, it is intended for high-accuracy signal conditioning where low power, compact size, and accurate differential amplification are important. Its stated bandwidth is 800 kHz, maximum supply current is 1.3 mA, and input bias current is 500 pA.
Where can I download the AD621ANZ datasheet PDF?
The official AD621ANZ datasheet PDF is available from Analog Devices at the AD621 data-sheet URL listed on this page. The document is the appropriate source for the complete electrical-characteristics table, gain settings, pin description, and application information. Use the package-specific ordering information when confirming that the ceramic or plastic 8-lead package and operating-temperature option correspond to AD621ANZ.
Where can I find the AD621ANZ pinout?
Use the pin-description table in the Analog Devices AD621 datasheet to assign PCB connections for the AD621ANZ. The verified part information identifies an 8-pin PDIP package, but a complete numbered pin list was not available for transcription here. The corresponding package drawing therefore uses the 8-pin PDIP footprint, while the displayed pinout remains unset until the manufacturer pin table can be applied directly.
What are the key specifications of AD621ANZ that engineers should know?
The principal AD621ANZ characteristics are an 800 kHz -3 dB bandwidth, 1.2 V/µs slew rate, 1.3 mA maximum supply current, 500 pA input bias current, and 75 µV input offset voltage. According to the Analog Devices AD621 product page and the AD621 datasheet, these characteristics support low-power, precision instrumentation-amplifier designs in an 8-pin PDIP package rated for -40°C to +85°C operation.
Where can I buy AD621ANZ online?
Use the Request a Quote form on this page to request AD621ANZ availability, current lead time, and order details. The form keeps the request associated with the exact AD621ANZ ordering code and its 8-pin PDIP tube packaging. Stock can change by quantity and manufacturing condition, so confirm allocation and delivery timing directly through the quote process rather than relying on an outdated catalog quantity.
What is the price of AD621ANZ?
The current unit price and volume breaks for AD621ANZ are displayed from the structured pricing information associated with this page. To obtain a quotation for a defined quantity, complete the Request a Quote form and specify the required quantity, tube count, and target delivery schedule. The quote request is the appropriate route for confirming current commercial terms and production availability.
What is the lead time for AD621ANZ?
Request the current AD621ANZ lead time through the Request a Quote form on this page. Lead time depends on order quantity, packaging quantity, and current factory allocation, so it should be confirmed for the specific purchase rather than inferred from a historical catalog record. The AD621ANZ ordering code specifies the required 8-pin PDIP configuration, helping the quote accurately identify the part.
Is AD621ANZ in stock?
Submit an AD621ANZ stock and allocation request with the Request a Quote form on this page. Live inventory may vary among components and quantities, and the AD621ANZ is supplied in tubes for the 8-pin PDIP package. Supply confirmation should therefore cover both the number of tubes required and the requested delivery schedule.
AD621ANZ vs AD621BN - which is better for a precision measurement design?
AD621ANZ and AD621BN are closely related AD621-family devices, but the correct choice should be confirmed from the manufacturer ordering table and electrical characteristics. Both are associated with the 8-pin PDIP format in the cross-reference material, while AD621ANZ is the target low-drift, low-power instrumentation amplifier rated for -40°C to +85°C. Use AD621ANZ when its specified grade and operating range satisfy the production requirement.
AD621ANZ vs INA128PA - which is better for a bridge sensor?
The AD621ANZ is the better fit when the design values its low 1.3 mA maximum supply current, 800 kHz bandwidth, and 75 µV input offset voltage for a portable bridge-sensor interface. The INA128PA is a valid cross-reference candidate in the 8-pin PDIP format, but its gain, supply, and accuracy characteristics should be compared against the required sensor excitation and measurement bandwidth before substitution.
When should I choose AD621ANZ over INA114AP?
Choose AD621ANZ when low power and its specified 800 kHz -3 dB bandwidth are central to the measurement design. The INA114AP appears in the AD621ANZ cross-reference list and offers a different instrumentation-amplifier specification set, so it should be selected only after checking input common-mode range, gain options, offset, drift, and supply requirements. The AD621ANZ remains the baseline choice when its published characteristics satisfy the system specification.
When should I choose AD621ANZ over AD620ANZ?
Choose AD621ANZ when its low-drift, low-power AD621-family characteristics and specified 800 kHz bandwidth are preferred for the instrumentation stage. AD620ANZ is a relevant 8-pin PDIP comparator, but the two parts should not be treated as automatically interchangeable merely because the packages match. Compare gain range, gain-setting implementation, common-mode range, offset, drift, and supply limits against the actual sensor interface.
Is AD621ANZ suitable for portable data acquisition?
Yes, AD621ANZ is well suited to portable and remote data-acquisition equipment because the Analog Devices datasheet highlights its maximum supply current of 1.3 mA and low-power operation. Its 500 pA input bias current also helps minimize loading of high-impedance sensors. The complete design must still verify supply range, common-mode limits, gain accuracy, and settling behavior for the selected channel bandwidth.
What can replace AD621ANZ?
The principal same-package candidates are AD621BN, INA141P, INA114AP, INA217AIPG4, INA128PA, and AD620ANZ, subject to exact package and electrical verification. AD621BN is the closest AD621-family starting point; the INA devices may require different gain networks, supply rails, reference connections, or stability conditions. No replacement should be approved until its manufacturer pinout and electrical characteristics are checked against the AD621ANZ schematic.
Is AD621ANZ the same as AD620ANZ?
No. AD621ANZ and AD620ANZ both appear in the 8-pin PDIP instrumentation-amplifier ecosystem, but they are different devices with different specified gain and electrical characteristics. The AD621 is characterized as a low-drift, low-power instrumentation amplifier with 800 kHz bandwidth and 1.3 mA maximum supply current. Treat AD620ANZ as a candidate requiring full schematic and specification review, not as an automatic identical replacement.

Impormasyon ng Talumpati sa Engineering for AD621ANZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD621ANZ for a precision, low-power differential measurement channel when the system benefits from its stated 1.3 mA maximum supply current, 500 pA input bias current, 75 µV input offset voltage, 800 kHz bandwidth, and 1.2 V/µs slew rate. It is particularly attractive for bridge sensors, portable acquisition, weigh-scale channels, and other applications where input loading and power consumption matter.

For the closest same-family review, begin with AD621BN and verify its grade-specific limits. Consider AD620ANZ only after checking its gain network and precision characteristics. The INA141P, INA114AP, and INA128PA can fit the same 8-pin PDIP format, but they are not automatically interchangeable because gain equations, common-mode limits, reference behavior, and compensation can differ. Before approving any substitute, compare the complete signal chain, recalculate gain and error budgets, verify supply and common-mode limits, and confirm settling at the target sampling rate. Also confirm lifecycle status, package dimensions, and the manufacturer’s pin description for the exact ordering code.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD621BN AD620ANZ INA141P INA114AP INA128PA
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Analog Devices Analog Devices Analog Devices Texas Instruments Texas Instruments Texas Instruments
Product Type Instrumentation Amplifier Instrumentation Amplifier Instrumentation Amplifier Instrumentation Amplifier Instrumentation Amplifier Instrumentation Amplifier

Pangunahing mga Pagkakaiba

  • Low maximum supply current for a precision instrumentation amplifier (kumpara saINA128PA)
  • 800 kHz bandwidth supports higher-rate sensor acquisition (kumpara saAD620ANZ)
  • Low input bias current supports high-impedance sources (kumpara saINA114AP)
  • Same-family AD621 configuration simplifies targeted replacement review (kumpara saINA141P)

Talaan ng Disenyo

Place the AD621ANZ close to the sensor or bridge output, and route the two differential inputs as a short, symmetrical pair. Keep these traces away from switching-converter nodes, relay contacts, high-current return paths, and display or digital timing signals. A grounded guard or shielding strategy can help reduce leakage and contamination when the input source is high impedance. Confirm the final input and reference traces against the manufacturer pin-description table before releasing the PCB artwork.

Decouple each supply connection locally with the capacitance and placement specified by the Analog Devices datasheet, and keep the supply return path short. The AD621ANZ has a stated maximum supply current of 1.3 mA, but total channel power also includes sensor excitation, the reference network, the ADC, and leakage through other components. For portable equipment, calculate the complete analog-section budget and verify startup behavior rather than relying only on the amplifier’s maximum supply-current specification.

Do not assume that every 8-pin instrumentation amplifier is a functional drop-in replacement. The gain-setting network, gain equation, input common-mode range, reference connection, output swing, and compensation requirements can differ between the AD621, AD620, and INA families. Revise the schematic for the selected replacement, then repeat gain, offset, noise, common-mode, and settling calculations. Package fit alone is insufficient to approve a substitution.

Use the stated 800 kHz -3 dB bandwidth and 1.2 V/µs slew rate as limits for the signal path, including the sensor, gain-setting network, reference path, ADC input, and PCB parasitics. If the selected gain is high, verify settling before sampling and assess whether additional filtering conflicts with the required response time. A simulation using realistic source impedance and load capacitance can expose instability or inadequate acquisition time before prototype testing.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Yes
Mga Conflict Mineral
Unknown

The AD621ANZ cross-reference listing identifies the component as halogen-free compliant. RoHS, REACH, lead-free, and conflict-minerals status are unknown.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD621ANZ datasheet AD621ANZ datasheet pdf AD621ANZ pinout AD621ANZ specifications AD621ANZ equivalent AD621ANZ replacement AD621ANZ drop-in replacement AD621ANZ vs INA128PA AD621ANZ instrumentation amplifier AD621ANZ PDIP pinout Analog Devices AD621ANZ AD621ANZ weight scale amplifier AD621ANZ price AD621ANZ stock where to buy AD621ANZ

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD621ANZ AD621 AD621BN AD620ANZ INA141P INA114AP INA217AIPG4 INA128PA instrumentation amplifier differential amplifier analog signal conditioner precision measurement data acquisition strain-gauge bridge pressure transducer thermocouple interface common-mode rejection input bias current input offset voltage slew rate 800 kHz bandwidth PDIP-8 DIP package through-hole mount
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ