AD621ANZ - Low-Drift Instrumentation Amplifier | Analog Devices
MPN: AD621ANZ ✓ فعالAD621ANZ نمای کلی
An instrumentation amplifier is a specialized analog amplifier optimized for sensor and measurement inputs. Its internal differential-input, gain-setting, and output stages provide accurate amplification of low-level signals from strain gauges, thermocouples, pressure sensors, and bridge networks. Unlike a general-purpose operational amplifier configured for differential input, a dedicated instrumentation amplifier is designed to offer high input impedance, controlled gain, and strong common-mode rejection in a compact circuit.
The AD621ANZ combines low power consumption with precision-oriented performance. Its stated bandwidth is 800 kHz, its input bias current is 500 pA, and its input offset voltage is 75 µV. A 1.2 V/µs slew rate supports accurate reproduction of changing analog signals. The Analog Devices product page describes the AD621 family as suitable for portable or remote systems where size, weight, and power dissipation are important.
The AD621 uses a three-op-amp instrumentation-amplifier architecture to amplify differential sensor signals. Its operating supply range is listed as -40°C to +85°C for the AD621ANZ package variant, and the device is offered in an 8-lead plastic DIP configuration. The low-drift, low-power design makes the amplifier particularly suitable for precision data-acquisition systems, including weigh-scale and general transducer-interface circuits.
Typical uses include weighing systems, industrial process monitoring, portable measurement instruments, biomedical instrumentation, and low-level sensor acquisition. For bridge-based sensors, the instrumentation amplifier converts a small differential bridge voltage into a larger single-ended signal while attenuating common-mode voltage present at both inputs. Its 1.3 mA maximum supply current is especially useful in battery-operated or remotely powered equipment.
Design the AD621ANZ with a clean, decoupled supply and route the input and output signals away from high-current switching paths. The gain-setting network, input filter, and reference-voltage connection determine practical system accuracy, so component tolerances and thermal gradients should be evaluated together. A prototype should also confirm that the selected gain and signal bandwidth provide adequate settling time before sampling.
This product page combines the manufacturer’s device description with package information, operating characteristics, sourcing details, drop-in replacement guidance, comparison parameters, and practical application notes. It is intended to help engineers determine whether the AD621ANZ fits a precision instrumentation-amplifier requirement before committing to a board layout or production BOM.
جایگزینهای drop-in برای AD621ANZ — همان پکیج، سازگار پینبهپین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.
گونهها در این سری
مدلهای همسری که جایگزین مستقیم هستند برای AD621ANZ (همان فرمفاکتور و فوتپرینت) — متفاوت در Package, Minimum Common-Mode Rejection, Product Type, Architecture, Gain Range.
AD621BN
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←AD620ANZ
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←INA141P
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←INA114AP
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←INA128PA
✅ جایگزین مستقیمبرای قیمت تماس بگیرید
مشاهده دیتاشیت ←AD621ANZ حداکثر مقادیر مجاز و مشخصات الکتریکی
| Product Type | Instrumentation Amplifier |
| Number of Circuits | 1 circuit |
| بستهبندی | 8-pin PDIP (0.300 inch, 7.62 mm pitch) |
| نوع نصب | Through-hole |
| Packaging Type | Tube |
| Small-Signal Bandwidth | 800 kHz at -3 dB |
| Slew Rate | 1.2 V/µs |
| Maximum Supply Current | 1.3 mA |
| Input Bias Current | 500 pA |
| Input Offset Voltage | 75 µV |
| محدوده دمای کاری | -40°C to +85°C |
| Halogen-Free Status | Compliant |
راهنمای پیکربندی پین AD621ANZ 8-pin pdip (0.300 inch, 7.62 mm pitch)
پیکربندی پین برای AD621ANZ (پکیج 8-pin pdip (0.300 inch, 7.62 mm pitch)). این قطعه آنالوگ دارای پینهای ورودی، خروجی و تغذیه است. برای پیکربندیهای پین offset null، جبرانسازی و فعالسازی به دیتاشیت سازنده مراجعه کنید. ایدهآل برای مدارهای شرطیسازی سیگنال و تقویتکننده.
داده پینآوت تفصیلی موجود نیست برای AD621ANZ.
به دیتاشیت برای پیکربندی کامل پینها.
کاربردهای معمول
AD621ANZ مناسب است برای 6 کاربردs: Precision Weigh-Scale Signal Conditioning, Industrial Pressure Transducer Interface, Portable Medical Signal Acquisition, Battery-Powered Data Acquisition, Thermocouple and Low-Level Sensor Interface, Remote Environmental Monitoring.
Precision Weigh-Scale Signal Conditioning
The AD621ANZ fits precision weigh-scale channels because it amplifies the small differential voltage produced by a strain-gauge bridge while rejecting common-mode excitation voltage. Its stated input bias current of 500 pA limits loading on high-resistance bridge arms, while the 75 µV input offset specification helps define the achievable low-level measurement accuracy. The 1.3 mA maximum supply current also supports compact or battery-assisted weighing equipment. In implementation, place the amplifier close to the bridge, decouple its supply rails, and calculate the gain so that the largest possible bridge imbalance plus bridge output does not exceed the amplifier’s input common-mode limits. Board temperature gradients and strain-gauge self-heating should also be included in the final error budget.
پیشنهادی
Industrial Pressure Transducer Interface
The AD621ANZ is appropriate for low-level pressure and force transducers that generate a differential output near a common-mode reference voltage. Its 800 kHz -3 dB bandwidth supports signal acquisition beyond static DC measurement, while the 1.2 V/µs slew rate helps preserve amplitude and phase accuracy for rapidly changing forces. The device’s 500 pA input bias current is useful when the sensor output impedance is high. Place a protected input network close to the amplifier pins, reference the output around the system’s mid-supply level, and isolate high-current motor or relay switching. Before selecting the gain, confirm that bridge excitation, output offset, common-mode excursion, and ADC input range remain within the AD621ANZ operating limits over the full pressure range.
پیشنهادی
Portable Medical Signal Acquisition
The AD621ANZ can serve as the first analog stage for low-level biomedical sensor signals when battery operation and compactness are important. Its maximum supply current of 1.3 mA reduces the power budget for wearable or portable acquisition, while the 75 µV input offset specification establishes a useful starting point for millivolt-level front-end design. Place the device close to the sensor connector, use guarded input routing to limit leakage, and separate sensitive input traces from display, switching-converter, and wireless-drive currents. The design must verify input bias-current error, common-mode range, noise performance, and electrode or sensor excitation requirements. Clinical applications also require system-level validation of isolation, leakage, and applicable regulatory controls beyond the IC specifications.
پیشنهادی
Battery-Powered Data Acquisition
The AD621ANZ is well matched to battery-powered multi-channel data-acquisition modules because the manufacturer highlights a maximum supply current of 1.3 mA and low power consumption. Its 800 kHz -3 dB bandwidth provides useful signal range for sensor monitoring, while the 500 pA input bias current reduces errors with high-impedance sources. In a multichannel design, use a clean low-noise supply, provide local bypass capacitance at the device, and stagger sensor excitation to control power-hungry channels. Choose the gain and sampling rate together so that the instrumentation amplifier settles before each conversion. The system-level power budget should also include sensor excitation, references, ADC, and leakage paths; the AD621ANZ’s own 1.3 mA maximum is only one portion of the complete acquisition-channel power consumption.
پیشنهادی
Thermocouple and Low-Level Sensor Interface
The AD621ANZ can amplify small differential sensor outputs when the design also manages input bias-current error, offset, and common-mode limits. Its 500 pA input bias current is helpful with high-impedance sources, while the specified 75 µV offset provides a reference for the overall error calculation. Thermocouple systems commonly require input filtering, cold-junction compensation, and protection against large transient voltages, so those functions should surround rather than replace the instrumentation amplifier. Route the differential pair as a compact, balanced pair, keep them away from switching nodes, and use a stable reference network at the output. Verify the selected gain against the sensor’s full output range and confirm that the amplifier remains within its valid common-mode window during startup and sensor disconnection.
پیشنهادی
Remote Environmental Monitoring
The AD621ANZ supports remote environmental monitoring systems that combine low-power operation with accurate amplification of small sensor outputs. Its 1.3 mA maximum supply current helps conserve energy in solar- or battery-powered installations, and the 800 kHz -3 dB bandwidth provides margin for sensors whose output changes during measurement. Place the amplifier near the sensor to minimize susceptible input routing, provide local supply bypassing, and protect the input path from moisture and electrostatic discharge. The system designer should evaluate gain accuracy, offset drift, noise, and the available output span for the full environmental range. A remote node should also include a controlled shutdown strategy or rail sequencing where the sensor and transmitter require ordered startup, because the AD621ANZ power saving alone does not solve input settling during power transitions.
پیشنهادی
خلاصه محصولات پیشنهادی
دادههای مرجع مهندسی برای AD621ANZ — مقایسه، راهنمای طراحی و اطلاعات انطباق.
راهنمای انتخاب
For the closest same-family review, begin with AD621BN and verify its grade-specific limits. Consider AD620ANZ only after checking its gain network and precision characteristics. The INA141P, INA114AP, and INA128PA can fit the same 8-pin PDIP format, but they are not automatically interchangeable because gain equations, common-mode limits, reference behavior, and compensation can differ. Before approving any substitute, compare the complete signal chain, recalculate gain and error budgets, verify supply and common-mode limits, and confirm settling at the target sampling rate. Also confirm lifecycle status, package dimensions, and the manufacturer’s pin description for the exact ordering code.
مقایسه با جایگزینها
| پارامتر | این محصول | AD621BN | AD620ANZ | INA141P | INA114AP | INA128PA |
|---|---|---|---|---|---|---|
| Package | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP | 8-pin PDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments | Texas Instruments | Texas Instruments |
| Product Type | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier | Instrumentation Amplifier |
تفاوتهای کلیدی
- Low maximum supply current for a precision instrumentation amplifier (در مقابلINA128PA)
- 800 kHz bandwidth supports higher-rate sensor acquisition (در مقابلAD620ANZ)
- Low input bias current supports high-impedance sources (در مقابلINA114AP)
- Same-family AD621 configuration simplifies targeted replacement review (در مقابلINA141P)
یادداشتهای طراحی
Place the AD621ANZ close to the sensor or bridge output, and route the two differential inputs as a short, symmetrical pair. Keep these traces away from switching-converter nodes, relay contacts, high-current return paths, and display or digital timing signals. A grounded guard or shielding strategy can help reduce leakage and contamination when the input source is high impedance. Confirm the final input and reference traces against the manufacturer pin-description table before releasing the PCB artwork.
Decouple each supply connection locally with the capacitance and placement specified by the Analog Devices datasheet, and keep the supply return path short. The AD621ANZ has a stated maximum supply current of 1.3 mA, but total channel power also includes sensor excitation, the reference network, the ADC, and leakage through other components. For portable equipment, calculate the complete analog-section budget and verify startup behavior rather than relying only on the amplifier’s maximum supply-current specification.
Do not assume that every 8-pin instrumentation amplifier is a functional drop-in replacement. The gain-setting network, gain equation, input common-mode range, reference connection, output swing, and compensation requirements can differ between the AD621, AD620, and INA families. Revise the schematic for the selected replacement, then repeat gain, offset, noise, common-mode, and settling calculations. Package fit alone is insufficient to approve a substitution.
Use the stated 800 kHz -3 dB bandwidth and 1.2 V/µs slew rate as limits for the signal path, including the sensor, gain-setting network, reference path, ADC input, and PCB parasitics. If the selected gain is high, verify settling before sampling and assess whether additional filtering conflicts with the required response time. A simulation using realistic source impedance and load capacitance can expose instability or inadequate acquisition time before prototype testing.
اطلاعات انطباق
The AD621ANZ cross-reference listing identifies the component as halogen-free compliant. RoHS, REACH, lead-free, and conflict-minerals status are unknown.