Analog Devices

AD711JN - 16 V/us Precision BiFET Op Amp | Analog Devices

MPN: AD711JN ✓ Nakahanda
0.25 mV maximum Vdss 8-pin plastic DIP Package
MOQ: 1 |

AD711JN Ulas

Analog Devices AD711JN is a single, precision, high-speed BiFET operational amplifier with a minimum slew rate of 16 V/us, a minimum unity-gain bandwidth of 3 MHz, and settling to 0.01% in 1.0 us. The device is supplied in an 8-pin plastic DIP package. It combines laser-trimmed offset characteristics with a JFET input stage and is positioned as a performance upgrade for legacy LF411 and TL081 designs.

A BiFET operational amplifier is a voltage-feedback amplifier whose differential input stage uses junction field-effect transistors. This BiFET input stage provides high input impedance, low bias currents, and good noise behavior while preserving the voltage-feedback operating characteristics required by precision analog signal chains. In the broader semiconductor hierarchy, the AD711JN belongs to the operational-amplifier, analog-amplifier, and signal-conditioning IC categories.

The AD711J grade emphasizes speed and precision. Its 16 V/us minimum slew rate allows large voltage swings to be reproduced rapidly, while the 3 MHz minimum unity-gain bandwidth provides useful closed-loop bandwidth for moderately fast instrumentation. The specified 0.01% settling performance in 1.0 us is particularly valuable in pulse-amplitude measurement, data conversion, active filtering, and feedback-control circuits where signal accuracy must be maintained shortly after a transition.

Laser wafer trimming is used to control offset voltage and offset-voltage drift, reducing errors that would otherwise be amplified in high-gain stages. The JFET input architecture also avoids the higher input bias currents commonly associated with older bipolar input designs. These characteristics make the amplifier suitable for low-level instrumentation, impedance buffers, audio-frequency signal processing, and feedback elements in higher-gain systems.

Typical uses include precision measurement amplifiers, active filters, sample-and-hold amplifiers, analog-to-digital converter input stages, and general-purpose high-speed voltage-feedback designs. An 8-pin DIP package makes the AD711JN convenient for prototyping, educational equipment, legacy industrial electronics, and repair applications where through-hole construction is preferred over a surface-mount package.

When using the AD711JN, preserve the pin assignments shown in the manufacturer pin description table and place input and feedback components close to the relevant terminals to minimize parasitic feedback. Select external resistors and capacitors for the required closed-loop gain and stability. Account for input- and output-voltage limits, power-supply headroom, and the 16 V/us edge-rate capability when driving capacitive or long interconnects.

This product page combines the manufacturer datasheet, package information, technical alternatives, comparison parameters, and practical circuit guidance. It helps engineers evaluate the AD711JN as a legacy-compatible precision BiFET amplifier while highlighting grade, bandwidth, settling-time, layout, and sourcing considerations that are not communicated by the part number alone.

Mga alternatibo na pwedeng ilagay na AD711JN — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD711JNZ

✅ Drop-In
📦 PDIP-8
Same AD711J electrical grade and 8-pin DIP footprint; core performance difference is 0% for the listed speed and precision ratings.

📋 Alternatibo na Reference (hindi sa katalogo)

AD711KNZ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 PDIP-8
Same AD711 family and 8-pin DIP footprint, with a 40C lower minimum operating temperature; core speed and precision ratings differ by 0%.

📋 Alternatibo na Reference (hindi sa katalogo)

AD711ANZ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 PDIP-8
Same AD711 family and 8-pin DIP footprint, with a 35C higher maximum operating temperature; core speed and precision ratings differ by 0%.

📋 Alternatibo na Reference (hindi sa katalogo)

AD711CNZ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 PDIP-8
Same AD711 family and 8-pin DIP footprint, with a 40C lower minimum operating temperature and otherwise matched core speed ratings.

📋 Alternatibo na Reference (hindi sa katalogo)

AD7111ABNZ

✅ Drop-In
📦 PDIP-8
Documented comparison candidate with the same 8-pin DIP footprint; key bandwidth and slew-rate differences are within 20% for replacement screening.

📋 Alternatibo na Reference (hindi sa katalogo)

AD7111LNZ

✅ Drop-In
📦 PDIP-8
Documented comparison candidate with the same 8-pin DIP footprint; key bandwidth and slew-rate differences are within 30% for replacement screening.

📋 Alternatibo na Reference (hindi sa katalogo)

AD711JN Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Single precision operational amplifier
Input Stage JFET/BiFET
Amplifier Configuration 1 circuit
Slew Rate 16 V/us minimum for AD711J
Unity-Gain Bandwidth 3 MHz minimum for AD711J
Settling Accuracy 0.01% in 1.0 us
Offset Voltage 0.25 mV maximum
Open-Loop Gain 200 V/mV minimum
Packhaging 8-pin plastic DIP
Uri ng Pagpapasok Through-hole

Pin Configuration ng AD711JN

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
Pin 1 OFFSET NULL — Offset-voltage null terminal
Pin 2 IN- — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V- — Negative supply connection
Pin 5 OFFSET NULL — Offset-voltage null terminal
Pin 6 OUTPUT — Analog output
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected (per datasheet)

Tipikal na mga Gamit

AD711JN ay nararapat para sa 6 aplikasyons: Precision Measurement Amplifier, Active Audio Filter, ADC Input Signal Conditioning, Pulse Signal Amplifier, Laboratory Instrumentation Buffer, Industrial Control Feedback.

📊

Precision Measurement Amplifier

The AD711JN fits low-level measurement front ends that require accurate amplification around the dc-to-audio-frequency range. Its minimum 3 MHz unity-gain bandwidth supports useful closed-loop response, while the 16 V/us minimum slew rate permits rapid settling after input steps. The laser-trimmed 0.25 mV maximum offset voltage helps control output error in high-gain instrumentation. Build the amplifier with short, low-leakage input routes, verify bias-current effects against the source impedance, and select the closed-loop noise gain for stable operation. The 0.01% settling specification in 1.0 us is useful when the acquisition system must capture a measurement shortly after a stimulus or calibration event.

🎧

Active Audio Filter

The AD711JN can implement precision active filters for audio-band signals because it combines a 3 MHz minimum unity-gain bandwidth with a 16 V/us minimum slew rate. These characteristics allow moderate-amplitude signals to cross the filter with limited slew distortion while retaining low-offset behavior from the trimmed input stage. Choose resistor and capacitor values that place poles and zeros within the amplifier's stable operating range, and verify maximum output swing for the intended signal level. Place feedback and compensation components close to the device, and keep the ground-return path short so filter performance is not degraded by shared copper impedance.

🔢

ADC Input Signal Conditioning

The AD711JN is suitable as the drive or buffer stage preceding a moderately fast analog-to-digital converter when the system requires low offset and rapid settling. Its 3 MHz minimum unity-gain bandwidth handles signal bandwidth below the converter's conversion characteristics, while the 0.01% settling in 1.0 us specification helps reduce timing error during acquisition. Select the amplifier gain so that the converter input range is not exceeded, then confirm the amplifier's output swing at the required logic levels. Keep the feedback network close to the package and route the converter clock and digital signals away from sensitive input and feedback nodes to minimize conversion error.

📈

Pulse Signal Amplifier

The AD711JN can amplify pulse-shaped signals when fast edge reproduction and post-transition accuracy are more important than very wideband operation. The AD711J grade offers a minimum 16 V/us slew rate and is specified to settle to 0.01% in 1.0 us. Those characteristics make it appropriate for sampling, thresholding, and loop-feedback circuits where a saturated amplifier would delay the next conversion or control action. Confirm the required output amplitude, load, and allowable settling interval, and use a stable feedback topology with compensation appropriate for the selected closed-loop gain.

🧪

Laboratory Instrumentation Buffer

The AD711JN provides a practical precision-buffer option for laboratory instruments that combine moderate bandwidth with low-level signal handling. Its JFET input stage supports high source impedance, laser trimming reduces offset error, and the 3 MHz minimum unity-gain bandwidth provides more margin than a slow precision amplifier. Use a unity-gain configuration only when stability is confirmed with the selected load and compensation values. Include input protection, account for input common-mode limits, and route the return connection directly to the analog ground reference to minimize measurement error.

🏭

Industrial Control Feedback

The AD711JN can be evaluated for industrial feedback loops that require moderate loop bandwidth, low offset, and a through-hole package for serviceable legacy equipment. The amplifier's 16 V/us minimum slew rate helps preserve control-loop phase margin when the loop contains only modest capacitance, while its 3 MHz minimum unity-gain bandwidth is sufficient for many low-bandwidth control signals. The designer must still account for the load, output saturation, supply headroom, and stability at the closed-loop gain. A grounded, shielded implementation should keep motor or relay return currents from sharing sensitive analog-ground paths.

Buod ng mga Inirekomendang Produkto

LF411 Legacy amplifier whose application can be upgraded with the AD711 family Ginagamit sa: Precision Measurement Amplifier, Active Audio Filter, ADC Input Signal Conditioning, Pulse Signal Amplifier, Laboratory Instrumentation Buffer, Industrial Control Feedback TL081 Legacy amplifier whose application can be upgraded with the AD711 family Ginagamit sa: Precision Measurement Amplifier, Active Audio Filter, ADC Input Signal Conditioning, Pulse Signal Amplifier, Laboratory Instrumentation Buffer, Industrial Control Feedback
What is the AD711JN and what are its key specifications?
The AD711JN is a single precision BiFET operational amplifier in an 8-pin plastic DIP package, with a minimum slew rate of 16 V/us, a minimum unity-gain bandwidth of 3 MHz, and settling to 0.01% in 1.0 us. According to the Analog Devices AD711 datasheet, its laser-trimmed offset voltage and low-drift JFET input stage make it useful in precision, high-speed feedback circuits.
Where can I download the AD711JN datasheet PDF?
The official AD711JN datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD711.pdf. The document describes the AD711 family, including the AD711J's 16 V/us minimum slew rate and 3 MHz minimum unity-gain bandwidth. Use the pin-description and electrical-characteristics tables in that datasheet when assigning connections and validating worst-case operating conditions.
Where can I find the AD711JN pinout?
The AD711JN pinout is documented in the Analog Devices AD711 datasheet and follows the standard 8-pin DIP arrangement: offset null, inverting input, non-inverting input, negative supply, offset null, output, positive supply, and no connect. Confirm every connection against the manufacturer's pin-description table before assembly, especially the two offset-null terminals and the no-connect pin.
Is the AD711JN suitable for high-speed signal conditioning?
Yes, the AD711JN is suitable for moderate-speed, high-precision signal conditioning because the AD711J grade provides a minimum slew rate of 16 V/us and a minimum unity-gain bandwidth of 3 MHz. According to the Analog Devices AD711 datasheet, it also settles to 0.01% in 1.0 us, making it more appropriate for precision pulse and feedback applications than for very high-frequency wideband instrumentation.
How does the AD711JN differ from an LF411 or TL081?
The AD711JN is positioned by Analog Devices as an enhanced replacement for LF411 and TL081 designs. Its distinguishing specifications include a minimum 16 V/us slew rate, 3 MHz minimum unity-gain bandwidth, and 0.01% settling in 1.0 us. The manufacturer also highlights laser-trimmed offset voltage and offset drift for improved precision in instrumentation and feedback applications.
What is the best drop-in replacement for AD711JN?
The AD711JNZ is the closest listed drop-in candidate because it retains the AD711J electrical grade and the same 8-pin DIP footprint; its practical difference is the order-code marking rather than the core amplifier ratings. Before substitution, verify the supplier's suffix definitions, temperature range, supply limits, and offset limits against the Analog Devices AD711 datasheet.
Can AD711KNZ replace AD711JN without a PCB change?
The AD711KNZ can serve as a footprint-compatible replacement when its temperature grade satisfies the design requirements. It uses the same 8-pin DIP arrangement and belongs to the AD711 family, but the K grade differs from the J grade in operating-temperature limits. Confirm electrical limits and stability performance for the actual supply, load, gain, and ambient conditions before approving the substitution.
When should I choose AD711JN instead of AD7111LNZ?
Choose the AD711JN when the design specifically targets the AD711 family characteristics of a 16 V/us minimum slew rate, 3 MHz minimum unity-gain bandwidth, and 0.01% settling in 1.0 us. Consider the AD7111LNZ only after comparing its gain bandwidth, slew rate, offset, noise, supply range, and stability data against the required measurement accuracy and signal bandwidth.
Is AD7111ABNZ a pin-compatible replacement for AD711JN?
The AD7111ABNZ appears as a documented AD711JN comparison candidate, but it should not be approved as a drop-in replacement without a complete electrical review. The devices have related amplifier roles, yet the required bandwidth, slew rate, offset, noise, supply range, and compensation behavior must match the original circuit. Confirm package pin assignments and stability at the intended gain before substitution.
How should I design the decoupling around AD711JN?
Place the manufacturer's recommended power-supply bypass capacitors directly between each supply pin and ground, with short traces and minimal loop area. Keep input, feedback, and compensation connections away from the supply and output paths to avoid parasitic feedback. Although no input-bypass capacitor is specified for the AD711 datasheet, stable printed-circuit layout remains essential when the amplifier operates near its 3 MHz minimum unity-gain bandwidth.
What thermal and output-drive considerations apply to the AD711JN?
The AD711JN is an 8-pin plastic DIP, and its thermal behavior depends on the supply voltage, output swing, load, ambient temperature, and PCB copper area. Keep the output within the datasheet limits and avoid sustained operation at the output-current or swing extremes unless the circuit's dissipation has been evaluated. Use the operating-temperature and output-current limits from the manufacturer datasheet for the selected grade.
Is AD711JN RoHS and REACH compliant?
The RoHS and REACH status of the AD711JN is not stated in the available manufacturer excerpts, so it should not be assumed for a new production release. Request the current compliance declaration or material declaration from the supplier and compare the exact order code. For regulated or export-sensitive equipment, complete that review before releasing the component for production.
What is the lead time and stock status of AD711JN?
Current stock, minimum order quantity, and production lead time for AD711JN are not fixed on this page. Use the Request a Quote form to state the required quantity, package preference, date code, and destination. The supplier should then confirm current availability and lead time for the exact AD711JN order code rather than relying on a generic family-level stock statement.
Where can I buy AD711JN online and what is its price?
Use the Request a Quote form on this page to request AD711JN pricing, availability, and lead time for the exact package and quantity you need. The form allows a purchasing team to compare current commercial terms without relying on a stale family-level price. Specify whether a standard AD711JN order code, temperature grade, or traceable delivery condition is required.
Is AD711JN the same as an AD7111LNZ?
No, the AD711JN and AD7111LNZ are related amplifier options but are not identical devices. The AD711JN belongs to the AD711 family and is characterized by a 16 V/us minimum slew rate, 3 MHz minimum unity-gain bandwidth, and 0.01% settling in 1.0 us. The AD7111LNZ must be evaluated against those requirements using its own manufacturer datasheet rather than treated as an automatic substitute.

Impormasyon ng Talumpati sa Engineering for AD711JN — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD711JN when a precision, high-speed JFET-input operational amplifier is required in an 8-pin DIP design and the circuit depends on the AD711J grade's 16 V/us minimum slew rate, 3 MHz minimum unity-gain bandwidth, or 0.01% settling in 1.0 us. AD711JNZ is the closest order-code alternative for PCB reuse, while AD711KNZ and AD711ANZ are useful when a broader temperature range is required with the same core family footprint. Consider AD7111ABNZ or AD7111LNZ only when their electrical characteristics, stability behavior, and temperature limits have been checked against the original design. No cross-brand drop-in candidate was established, so an equivalent from another manufacturer should not be assumed. For new high-volume surface-mount products, also evaluate modern amplifier families whose lower power, lower offset, lower noise, or rail-to-rail capability may better match the application.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD711JNZ AD711KNZ AD711ANZ AD7111ABNZ AD7111LNZ
Package PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8 PDIP-8
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Product Type Single precision BiFET operational amplifier Single precision BiFET operational amplifier Single precision BiFET operational amplifier Single precision BiFET operational amplifier Single operational amplifier Single operational amplifier
Price Tier Request a quote Request a quote Request a quote Request a quote Request a quote Request a quote

Pangunahing mga Pagkakaiba

  • AD711J-grade speed and settling performance (kumpara saAD7111ABNZ)
  • Closest order-code alternative (kumpara saAD711JNZ)
  • Broader temperature-grade options within the same footprint (kumpara saAD711KNZ)

Talaan ng Disenyo

Place the power-supply bypass capacitors directly between the V+ and V- pins and the appropriate ground return. Keep the loops short and avoid routing sensitive input and feedback traces alongside the output or supply paths. The 3 MHz minimum unity-gain bandwidth makes short feedback paths and clean grounding especially important. A compact analog ground region around pin 8 and the supply bypass capacitors will generally produce more predictable behavior than a broad shared return path.

Design for the AD711J grade's 16 V/us minimum slew rate when driving long PCB traces or cable capacitance. A fast edge can produce overshoot and ringing even when the signal frequency is modest. Terminate the line appropriately for its impedance, keep the amplifier close to the source and load, and use a series resistor close to the output when capacitive loading requires damping. Verify the resulting waveform with an oscilloscope across the full intended load range.

Do not assume that every amplifier with a similar 8-pin package is electrically interchangeable. Confirm the offset null assignments, input polarity, supply connections, and no-connect position against the Analog Devices pin-description table. Also check the selected grade's temperature limits and compare slew rate, bandwidth, offset, input bias current, and supply range before replacing an AD711JN. A footprint match alone does not guarantee circuit-level compatibility.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The available manufacturer excerpts do not state the RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the exact AD711JN order code. AEC-Q100 is not applicable to this general-purpose precision operational amplifier.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ad711jn datasheet AD711JN datasheet PDF AD711JN pinout AD711JN specifications AD711JN 16 V/us AD711JN 3 MHz Analog Devices AD711JN AD711JN equivalent AD711JN replacement AD711JN drop-in substitute AD711JN vs AD711JNZ AD711JN vs AD7111LNZ AD711JN DIP pinout AD711JN price AD711JN stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD711JN AD711 AD711JNZ AD711KNZ AD711ANZ AD711CNZ AD7111ABNZ AD7111LNZ BiFET operational amplifier JFET operational amplifier precision operational amplifier voltage-feedback amplifier signal-conditioning IC analog amplifier semiconductor PDIP-8 DIP package through-hole package slew rate unity-gain bandwidth settling time offset voltage open-loop gain laser wafer trimming
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ