AD7306ANZ - 5V RS-232/RS-422 Transceiver | Analog Devices
MPN: AD7306ANZ ✓ NakahandaAD7306ANZ Ulas
A line driver/receiver transceiver converts digital logic signals into communication-level voltages and converts received line signals back into logic-compatible levels. In the communications hierarchy, the AD7306 belongs to the interface IC class, where it bridges a host controller or processor and a physical serial link. Its combination of RS-232 and RS-422 support allows one package to serve point-to-point, multidrop, instrumentation, and legacy data-communication equipment.
The device provides three transmit channels and three receive channels, allowing multiple serial lines to be serviced without separate driver and receiver packages. Its 5 V supply operation supports conventional TTL-based equipment. All inputs have ESD protection, while driver outputs provide high source and sink current capability and short-circuit protection. The monolithic implementation also uses an epitaxial layer to guard against latch-up, improving robustness in industrial and instrumentation environments.
The AD7306ANZ combines two RS-232 drivers with an RS-422 driver in one 24-pin package. This mixed-standard arrangement is useful when a system must communicate with more than one class of peripheral, particularly older RS-232 equipment alongside balanced RS-422 equipment. The configurable receiver path expands design flexibility, but system-level termination, grounding, and signal-routing decisions remain essential for reliable operation on long or electrically noisy interconnects.
Typical uses include industrial serial interfaces, test and measurement equipment, legacy computer peripherals, point-of-sale terminals, data-acquisition systems, and embedded control links that need both RS-232 and RS-422 connectivity. The through-hole PDIP package is especially useful where field replacement, socketed assembly, or larger-hole mechanical tolerances are preferred over a surface-mount land pattern.
Designers should follow the pin-description table and recommended circuit in the manufacturer datasheet when assigning RS-232 versus RS-422 modes. Protection networks should be placed where cables enter the board, while ground and signal routing should minimize noise pickup. The AD7306ANZ is best chosen when a system specifically needs the combined three-driver, three-receiver RS-232/RS-422 feature set rather than a simpler single-standard interface IC.
This product page combines manufacturer interface information with practical application guidance, package details, sourcing guidance, and a conservative drop-in assessment. It also distinguishes verified electrical facts from parameters that should be confirmed in the complete manufacturer datasheet before a new PCB or replacement decision is released.
Mga alternatibo na pwedeng ilagay na AD7306ANZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
AD7306AN
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD7306ANZ Mga Pinakamataas na Rating at Electrical Characteristics
| Volte ng Pagbibigay | 5 V |
| Operating Supply Voltage Range | 4.75 V to 5.25 V |
| Number of Drivers | 3 channels |
| Number of Receivers | 3 channels |
| RS-232 Drivers | 2 channels |
| RS-422 Drivers | 1 channel |
| RS-232 Receivers | 1 channel |
| Configurable Receiver Path | 1 channel |
| Supported Communication Standards | EIA RS-232 and EIA RS-422 |
| Logic Interface | TTL signal levels |
| Input ESD Protection | Present on all inputs |
| Driver Output Short-Circuit Protection | Present on all driver outputs |
| Latch-Up Protection | Epitaxial isolation layer |
| Package Type | 24-pin PDIP |
| Package Pin Count | 24 pins |
| Uri ng Pagpapasok | Through-hole |
Gabay sa Pin Configuration ng AD7306ANZ 24 pins
Pin configuration para sa AD7306ANZ (24 pins package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD7306ANZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD7306ANZ ay nararapat para sa 6 aplikasyons: Industrial Serial Control Systems, Test and Measurement Equipment, Legacy Computer Peripheral Interfacing, Point-of-Sale Terminal Interfaces, Data Acquisition Systems, Field-Service Communication Equipment.
Industrial Serial Control Systems
The AD7306ANZ fits industrial control equipment that must support both legacy RS-232 and balanced RS-422 links. Its three-driver, three-receiver configuration allows multiple commands, responses, or peripheral connections to share one interface package, while the 4.75 V to 5.25 V operating range aligns with conventional 5 V logic. The mixed-standard channel arrangement is useful when a controller communicates with older RS-232 instruments and newer RS-422 modules. The designer should assign each channel from the manufacturer pin table, configure the receiver path for the required standard, and verify grounding and termination to prevent differential-mode noise from affecting the link.
Inirekomenda
Test and Measurement Equipment
The AD7306ANZ is appropriate for test and measurement instruments that require multiple serial ports or compatibility with both unbalanced and balanced equipment. The two RS-232 drivers, one RS-422 driver, and three receiver paths provide more interface density than a simple one-channel transceiver. This allows a single 5 V package to handle instrument control commands, status reporting, or trigger information. Because measurement systems often combine long cables with sensitive analog circuitry, the RS-422 channel should use the manufacturer-recommended interface arrangement and appropriate board grounding. Keep serial routing away from high-impedance sensor inputs and verify timing and logic thresholds against the complete manufacturer datasheet.
Inirekomenda
Legacy Computer Peripheral Interfacing
The AD7306ANZ can bridge TTL logic from a legacy controller to RS-232 peripherals while also providing RS-422 connectivity for longer-distance or noise-prone links. Its three transmit channels and three receive channels support command, response, and auxiliary signaling without requiring one transceiver per direction. The 5 V supply requirement is suitable for established TTL control boards, and the 24-pin PDIP format supports socketed or straightforward through-hole assembly. Engineers should use the manufacturer connection diagrams to configure RS-232 or RS-422 operation and should not assume a mixed-standard transceiver can drive both standards simultaneously from the same channel.
Inirekomenda
Point-of-Sale Terminal Interfaces
The AD7306ANZ fits point-of-sale equipment requiring several communication paths to peripherals such as scanners, printers, payment accessories, or service equipment. Its three drivers and three receivers provide useful channel density in a single 24-pin PDIP package, and the combined RS-232 and RS-422 support allows a terminal design to connect legacy serial accessories alongside balanced equipment. The device operates from a 4.75 V to 5.25 V supply, which aligns with conventional embedded logic rails. Designers should separate transmit and receive routing, follow the manufacturer pinout when assigning standards, and apply cable-entry protection appropriate to the installation environment.
Inirekomenda
Data Acquisition Systems
The AD7306ANZ is suitable for data-acquisition systems that combine controller-to-instrument commands with instrument-to-controller measurements. The dedicated RS-232 channel, RS-422 driver, and configurable receiver path support different serial-interface arrangements within one package. This can reduce board area compared with multiple single-channel transceivers while retaining a 5 V operating range suitable for TTL-based control hardware. For accurate acquisition, use the balanced interface where appropriate, maintain a well-defined ground strategy, and route serial signals away from analog and high-impedance measurement nodes. Verify driver and receiver timing requirements against the complete manufacturer datasheet before fixing the system clock rate.
Inirekomenda
Field-Service Communication Equipment
The AD7306ANZ is useful in portable or field-service equipment that must connect to service tools through both RS-232 and RS-422 ports. Multiple drivers and receivers allow diagnostic commands, responses, and auxiliary channels to share a compact interface circuit, while the 24-pin PDIP package is practical for designs assembled with through-hole components. Its 5 V supply range supports conventional embedded systems, and the manufacturer's stated ESD and short-circuit protections add robustness at the interface. Field cables should still receive appropriate external surge and ESD protection, and the PCB should provide a low-impedance ground path so common-mode disturbances do not degrade receiver performance.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD7306ANZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD7306AN |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 24-PDIP | 24-PDIP |
| Nominal Supply Voltage | 5 V | 5 V |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Driver Count | 3 drivers | 3 drivers |
| Receiver Count | 3 receivers | 3 receivers |
| Supported Standards | EIA RS-232 and EIA RS-422 | EIA RS-232 and EIA RS-422 |
| RS-232 Drivers | 2 channels | 2 channels |
| RS-422 Drivers | 1 channel | 1 channel |
| Input ESD Protection | Present on all inputs | Present on all inputs |
| Driver Short-Circuit Protection | Present on all driver outputs | Present on all driver outputs |
Pangunahing mga Pagkakaiba
- Combines two communication standards in one interface package (kumpara saAD7306AN)
- Provides six-channel transceiver density (kumpara saAD7306AN)
- Uses a conventional 5 V operating range (kumpara saAD7306AN)
Talaan ng Disenyo
Assign the AD7306ANZ channels directly from the manufacturer pin-description table before routing the PCB. Keep driver outputs and receiver inputs physically separated to reduce crosstalk, especially on boards that operate both RS-232 and RS-422 channels. Place any external protection components near the connector entry, and route the transceiver ground reference directly back toward the logic ground without introducing long loops through the cable shield.
Do not treat the AD7306ANZ as a generic multipin transceiver with interchangeable standards. The two RS-232 drivers, one RS-422 driver, and configurable receiver path have different electrical configurations. Use the recommended circuit in the manufacturer datasheet, confirm the intended standard for every channel, and verify whether the selected receiver configuration requires external components before releasing the layout.
Operate the device within its 4.75 V to 5.25 V supply range. Place the bypass capacitor close to the supply and ground pins, keep the supply return path continuous, and avoid sharing narrow copper sections with unrelated high-current outputs. If driver activity can coincide with a significant supply disturbance, provide local bulk capacitance and confirm the resulting rail excursion against the receiver and driver limits in the manufacturer datasheet.
RS-232 uses unbalanced signaling, so cable routing and grounding directly affect emissions and noise immunity. Keep unprotected cable wiring away from switching nodes and analog inputs, use the shortest practical ground return, and install suitable transient protection at exposed connectors. For an RS-422 channel, follow the manufacturer termination arrangement and use a balanced route to preserve the noise advantage of differential signaling.
Impormasyon ng Pagsunod sa Kautusan
Confirm current material, environmental, and automotive qualification declarations for the exact AD7306ANZ ordering code before production release.