Analog Devices

AD7306ANZ - 5V RS-232/RS-422 Transceiver | Analog Devices

MPN: AD7306ANZ ✓ Hoạt động
5 V Vdss EIA RS-232 and EIA RS-422 Rds(on) 24-pin PDIP Package
MOQ: 1 |

AD7306ANZ Tóm tắt

The Analog Devices AD7306ANZ is a 5 V monolithic RS-232/RS-422 interface transceiver with three drivers and three receivers in a 24-pin PDIP package. It operates from a 4.75 V to 5.25 V supply and bridges TTL signal levels with dual-standard EIA RS-232 and RS-422 communication levels. Its integrated channels include two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one receiver path that can be configured for the required interface standard.

A line driver/receiver transceiver converts digital logic signals into communication-level voltages and converts received line signals back into logic-compatible levels. In the communications hierarchy, the AD7306 belongs to the interface IC class, where it bridges a host controller or processor and a physical serial link. Its combination of RS-232 and RS-422 support allows one package to serve point-to-point, multidrop, instrumentation, and legacy data-communication equipment.

The device provides three transmit channels and three receive channels, allowing multiple serial lines to be serviced without separate driver and receiver packages. Its 5 V supply operation supports conventional TTL-based equipment. All inputs have ESD protection, while driver outputs provide high source and sink current capability and short-circuit protection. The monolithic implementation also uses an epitaxial layer to guard against latch-up, improving robustness in industrial and instrumentation environments.

The AD7306ANZ combines two RS-232 drivers with an RS-422 driver in one 24-pin package. This mixed-standard arrangement is useful when a system must communicate with more than one class of peripheral, particularly older RS-232 equipment alongside balanced RS-422 equipment. The configurable receiver path expands design flexibility, but system-level termination, grounding, and signal-routing decisions remain essential for reliable operation on long or electrically noisy interconnects.

Typical uses include industrial serial interfaces, test and measurement equipment, legacy computer peripherals, point-of-sale terminals, data-acquisition systems, and embedded control links that need both RS-232 and RS-422 connectivity. The through-hole PDIP package is especially useful where field replacement, socketed assembly, or larger-hole mechanical tolerances are preferred over a surface-mount land pattern.

Designers should follow the pin-description table and recommended circuit in the manufacturer datasheet when assigning RS-232 versus RS-422 modes. Protection networks should be placed where cables enter the board, while ground and signal routing should minimize noise pickup. The AD7306ANZ is best chosen when a system specifically needs the combined three-driver, three-receiver RS-232/RS-422 feature set rather than a simpler single-standard interface IC.

This product page combines manufacturer interface information with practical application guidance, package details, sourcing guidance, and a conservative drop-in assessment. It also distinguishes verified electrical facts from parameters that should be confirmed in the complete manufacturer datasheet before a new PCB or replacement decision is released.

Bộ thay thế dễ dàng lắp đặt cho AD7306ANZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

AD7306AN

✅ Drop-In
📦 24-PDIP
0 V supply-voltage difference and 0 driver-count difference; the ordering suffixes indicate different grade classifications whose exact limits require datasheet confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

AD7306ANZ Tỷ lệ tối đa & tính chất điện

Điện áp cung cấp 5 V
Operating Supply Voltage Range 4.75 V to 5.25 V
Number of Drivers 3 channels
Number of Receivers 3 channels
RS-232 Drivers 2 channels
RS-422 Drivers 1 channel
RS-232 Receivers 1 channel
Configurable Receiver Path 1 channel
Supported Communication Standards EIA RS-232 and EIA RS-422
Logic Interface TTL signal levels
Input ESD Protection Present on all inputs
Driver Output Short-Circuit Protection Present on all driver outputs
Latch-Up Protection Epitaxial isolation layer
Package Type 24-pin PDIP
Package Pin Count 24 pins
Kiểu lắp đặt Through-hole

Hướng dẫn cấu hình chân AD7306ANZ 24 pins

Cấu hình chân cho AD7306ANZ (24 pins gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.

Bảng cấu hình chân 24 pins cho AD7306ANZ

Không có dữ liệu chân cụ thể sẵn có cho AD7306ANZ.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

AD7306ANZ phù hợp cho 6 Áp dụngs: Industrial Serial Control Systems, Test and Measurement Equipment, Legacy Computer Peripheral Interfacing, Point-of-Sale Terminal Interfaces, Data Acquisition Systems, Field-Service Communication Equipment.

🏭

Industrial Serial Control Systems

The AD7306ANZ fits industrial control equipment that must support both legacy RS-232 and balanced RS-422 links. Its three-driver, three-receiver configuration allows multiple commands, responses, or peripheral connections to share one interface package, while the 4.75 V to 5.25 V operating range aligns with conventional 5 V logic. The mixed-standard channel arrangement is useful when a controller communicates with older RS-232 instruments and newer RS-422 modules. The designer should assign each channel from the manufacturer pin table, configure the receiver path for the required standard, and verify grounding and termination to prevent differential-mode noise from affecting the link.

🔧

Test and Measurement Equipment

The AD7306ANZ is appropriate for test and measurement instruments that require multiple serial ports or compatibility with both unbalanced and balanced equipment. The two RS-232 drivers, one RS-422 driver, and three receiver paths provide more interface density than a simple one-channel transceiver. This allows a single 5 V package to handle instrument control commands, status reporting, or trigger information. Because measurement systems often combine long cables with sensitive analog circuitry, the RS-422 channel should use the manufacturer-recommended interface arrangement and appropriate board grounding. Keep serial routing away from high-impedance sensor inputs and verify timing and logic thresholds against the complete manufacturer datasheet.

🖥️

Legacy Computer Peripheral Interfacing

The AD7306ANZ can bridge TTL logic from a legacy controller to RS-232 peripherals while also providing RS-422 connectivity for longer-distance or noise-prone links. Its three transmit channels and three receive channels support command, response, and auxiliary signaling without requiring one transceiver per direction. The 5 V supply requirement is suitable for established TTL control boards, and the 24-pin PDIP format supports socketed or straightforward through-hole assembly. Engineers should use the manufacturer connection diagrams to configure RS-232 or RS-422 operation and should not assume a mixed-standard transceiver can drive both standards simultaneously from the same channel.

📺

Point-of-Sale Terminal Interfaces

The AD7306ANZ fits point-of-sale equipment requiring several communication paths to peripherals such as scanners, printers, payment accessories, or service equipment. Its three drivers and three receivers provide useful channel density in a single 24-pin PDIP package, and the combined RS-232 and RS-422 support allows a terminal design to connect legacy serial accessories alongside balanced equipment. The device operates from a 4.75 V to 5.25 V supply, which aligns with conventional embedded logic rails. Designers should separate transmit and receive routing, follow the manufacturer pinout when assigning standards, and apply cable-entry protection appropriate to the installation environment.

📡

Data Acquisition Systems

The AD7306ANZ is suitable for data-acquisition systems that combine controller-to-instrument commands with instrument-to-controller measurements. The dedicated RS-232 channel, RS-422 driver, and configurable receiver path support different serial-interface arrangements within one package. This can reduce board area compared with multiple single-channel transceivers while retaining a 5 V operating range suitable for TTL-based control hardware. For accurate acquisition, use the balanced interface where appropriate, maintain a well-defined ground strategy, and route serial signals away from analog and high-impedance measurement nodes. Verify driver and receiver timing requirements against the complete manufacturer datasheet before fixing the system clock rate.

🔧

Field-Service Communication Equipment

The AD7306ANZ is useful in portable or field-service equipment that must connect to service tools through both RS-232 and RS-422 ports. Multiple drivers and receivers allow diagnostic commands, responses, and auxiliary channels to share a compact interface circuit, while the 24-pin PDIP package is practical for designs assembled with through-hole components. Its 5 V supply range supports conventional embedded systems, and the manufacturer's stated ESD and short-circuit protections add robustness at the interface. Field cables should still receive appropriate external surge and ESD protection, and the PCB should provide a low-impedance ground path so common-mode disturbances do not degrade receiver performance.

Tóm tắt các sản phẩm được đề xuất

AD7306ANZ Analog Devices Được sử dụng trong: Industrial Serial Control Systems, Test and Measurement Equipment, Legacy Computer Peripheral Interfacing, Point-of-Sale Terminal Interfaces, Data Acquisition Systems, Field-Service Communication Equipment AD7306AN Related AD7306 24-PDIP interface ordering option Được sử dụng trong: Industrial Serial Control Systems, Test and Measurement Equipment, Legacy Computer Peripheral Interfacing, Point-of-Sale Terminal Interfaces, Data Acquisition Systems, Field-Service Communication Equipment
What is the AD7306ANZ and what interface standards does it support?
The AD7306ANZ is a 5 V monolithic line driver/receiver transceiver that supports EIA RS-232 and RS-422 interfaces in one package. According to the Analog Devices manufacturer product page, it includes two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one receiver path that can be configured for the required standard. It is useful when equipment must connect TTL logic to more than one type of serial interface.
How many drivers and receivers does the AD7306ANZ contain?
The AD7306ANZ contains three drivers and three receivers. The transmitter section comprises two RS-232 drivers and one RS-422 driver, while the receiver section includes one dedicated RS-232 receiver and one configurable receiver path. This six-channel arrangement provides a higher channel count than a conventional single-driver, single-receiver RS-232 interface while retaining RS-422 support.
What is the operating voltage range of AD7306ANZ?
The AD7306ANZ operates from a 4.75 V to 5.25 V supply and is specified as a 5 V device. Its nominal supply is therefore compatible with conventional 5 V TTL-based logic systems. The manufacturer datasheet should be consulted for decoupling, absolute maximum ratings, and the detailed electrical limits associated with each driver and receiver channel.
Where can I download the AD7306ANZ datasheet PDF?
The official AD7306ANZ documentation is available through the Analog Devices AD7306 product page at https://www.analog.com/en/products/ad7306.html. The manufacturer datasheet is the primary document for assigning the 24 package pins, selecting RS-232 or RS-422 receiver configurations, and reproducing the recommended interface circuit. Use the package pin-description table when creating a schematic or PCB layout.
Where can I find the AD7306ANZ pinout and package information?
The AD7306ANZ uses a 24-pin PDIP package, and its complete pin assignment is shown in the manufacturer datasheet. Begin with the AD7306 product page at https://www.analog.com/en/products/ad7306.html and consult the pin-description table and connection diagrams. Assign each driver, receiver, supply, and ground lead according to those diagrams rather than relying only on the device function.
What is the best drop-in replacement for AD7306ANZ?
AD7306AN is the closest documented same-family option because the manufacturer documentation describes it as the same AD7306 RS-232/RS-422 transceiver in a 24-PDIP package. The exact operating-temperature grades should be checked before substitution because the AN and ANZ suffixes may identify different temperature classifications. No additional pin-compatible alternatives were established, so board-level replacement should not rely on an assumed cross-manufacturer equivalent.
Can AD7306AN replace AD7306ANZ on an existing PCB?
AD7306AN can serve as a candidate replacement for AD7306ANZ because both are identified as 24-PDIP versions of the AD7306 dual-standard transceiver. Before approving the substitution, compare the temperature grade, supply limits, channel electrical characteristics, and any qualification requirements associated with each suffix. The package match does not by itself prove that every operating limit is identical.
Is AD7306ANZ the same as a conventional RS-232 transceiver?
The AD7306ANZ is more versatile than a conventional single-standard RS-232 transceiver because it combines RS-232 and RS-422 channels in one monolithic device. It provides two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and a configurable receiver path. This makes it suitable for mixed legacy and balanced serial interfaces, but system design must configure each channel for its intended standard.
When should I choose AD7306ANZ instead of a single-standard RS-232 interface IC?
Choose AD7306ANZ when the design needs both RS-232 and RS-422 connectivity or more than one receive channel in a single 24-pin device. Its three drivers and three receivers reduce the number of separate interface packages required for mixed-interface equipment. A single-standard RS-232 IC may be simpler when only one driver-receiver pair is required and RS-422 capability is unnecessary.
Where can I buy AD7306ANZ and check its current price?
Use the Request a Quote form on this page to request the current AD7306ANZ price, stock position, lead time, and order quantity. The part is an Analog Devices 24-PDIP RS-232/RS-422 transceiver and can also be identified by its complete manufacturer part number AD7306ANZ when obtaining an authorized quotation or reviewing manufacturer documentation.
What is the lead time for AD7306ANZ?
The current production and stocking lead time for AD7306ANZ should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package availability, and current manufacturer channel status. Include the required quantity, target delivery date, and whether unopened tube or bulk handling is acceptable when submitting the request.
Is AD7306ANZ in stock?
Current AD7306ANZ inventory should be checked through the Request a Quote form on this page rather than inferred from a product-page listing. The manufacturer product page identifies the AD7306 family, and distributor listings show the exact AD7306ANZ ordering code. Request the current stock quantity and confirmation before committing a production schedule.
What is the AD7306ANZ vs AD7306AN difference for a replacement?
AD7306ANZ and AD7306AN are both documented 24-PDIP AD7306 devices with the same 5 V RS-232/RS-422 transceiver function. The principal replacement question is whether their suffix-defined temperature grades and exact electrical limits satisfy the operating environment. Confirm the ordering information in the manufacturer datasheet before substituting one ordering code for the other in a released design.
What are the key specifications of AD7306ANZ that engineers should know?
The AD7306ANZ is a 5 V, 24-PDIP monolithic interface IC with three drivers and three receivers, supporting EIA RS-232 and RS-422. It includes two RS-232 drivers, one RS-422 driver, one RS-232 receiver, and one configurable receiver path. All inputs have ESD protection, and driver outputs include short-circuit protection, high source capability, and high sink capability.
What protection features does AD7306ANZ provide?
The AD7306ANZ provides ESD protection on all inputs, while every driver output has high source and sink current capability with internal short-circuit protection. The monolithic implementation also uses an epitaxial layer to guard against latch-up. These protections improve interface robustness, but external cable transients may still require suitable board-level protection selected for the actual connection environment.

Dữ liệu tham khảo kỹ thuật cho AD7306ANZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the AD7306ANZ when the equipment needs both RS-232 and RS-422 in a single 24-pin package, particularly when two or three communication paths are required. Its three drivers, three receivers, and configurable receiver path can simplify mixed legacy and balanced serial-interface designs compared with several single-channel devices. AD7306AN is the closest documented package-compatible alternative and should be considered when its suffix-defined temperature grade and electrical limits match the target application. Do not substitute a conventional RS-232-only IC when the design requires an RS-422 driver, or select a surface-mount RS-232 product when the existing board requires a PDIP footprint. For new designs, compare the required channel count, operating temperature, interface standards, data rate, protection requirements, and available board space before finalizing the ordering code.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này AD7306AN
Brand Analog Devices Analog Devices
Package 24-PDIP 24-PDIP
Nominal Supply Voltage 5 V 5 V
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Driver Count 3 drivers 3 drivers
Receiver Count 3 receivers 3 receivers
Supported Standards EIA RS-232 and EIA RS-422 EIA RS-232 and EIA RS-422
RS-232 Drivers 2 channels 2 channels
RS-422 Drivers 1 channel 1 channel
Input ESD Protection Present on all inputs Present on all inputs
Driver Short-Circuit Protection Present on all driver outputs Present on all driver outputs

Bảo phân biệt quan trọng

  • Combines two communication standards in one interface package (vsAD7306AN)
  • Provides six-channel transceiver density (vsAD7306AN)
  • Uses a conventional 5 V operating range (vsAD7306AN)

Ghi chú thiết kế

Assign the AD7306ANZ channels directly from the manufacturer pin-description table before routing the PCB. Keep driver outputs and receiver inputs physically separated to reduce crosstalk, especially on boards that operate both RS-232 and RS-422 channels. Place any external protection components near the connector entry, and route the transceiver ground reference directly back toward the logic ground without introducing long loops through the cable shield.

Do not treat the AD7306ANZ as a generic multipin transceiver with interchangeable standards. The two RS-232 drivers, one RS-422 driver, and configurable receiver path have different electrical configurations. Use the recommended circuit in the manufacturer datasheet, confirm the intended standard for every channel, and verify whether the selected receiver configuration requires external components before releasing the layout.

Operate the device within its 4.75 V to 5.25 V supply range. Place the bypass capacitor close to the supply and ground pins, keep the supply return path continuous, and avoid sharing narrow copper sections with unrelated high-current outputs. If driver activity can coincide with a significant supply disturbance, provide local bulk capacitance and confirm the resulting rail excursion against the receiver and driver limits in the manufacturer datasheet.

RS-232 uses unbalanced signaling, so cable routing and grounding directly affect emissions and noise immunity. Keep unprotected cable wiring away from switching nodes and analog inputs, use the shortest practical ground return, and install suitable transient protection at exposed connectors. For an RS-422 channel, follow the manufacturer termination arrangement and use a balanced route to preserve the noise advantage of differential signaling.

Thông tin tuân thủ

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

Confirm current material, environmental, and automotive qualification declarations for the exact AD7306ANZ ordering code before production release.

Dữ liệu được xác minh vào: 2026-11-18 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

AD7306ANZ datasheet AD7306ANZ datasheet pdf AD7306ANZ pinout AD7306ANZ equivalent AD7306ANZ replacement AD7306ANZ vs AD7306AN AD7306ANZ price AD7306ANZ stock Analog Devices AD7306ANZ AD7306ANZ 24-PDIP pinout AD7306ANZ RS-232 RS-422 transceiver AD7306ANZ industrial serial interface

Các bộ phận và thuật ngữ liên quan

Analog Devices AD7306ANZ AD7306AN RS-232 RS-422 line driver receiver transceiver interface IC TTL logic 5 V power supply 24-pin PDIP through-hole package ESD protection short-circuit protection latch-up protection industrial control test and measurement equipment data acquisition system point-of-sale terminal serial communication configurable receiver Analog Devices AD7306 EIA RS-232 EIA RS-422
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ