Analog Devices

AD7440BRM - 10-Bit 1 MSPS Differential SAR ADC | Analog Devices

MPN: AD7440BRM ✓ Nakahanda
3 V or 5 V Vdss 8-pin MSOP (RM-8) Package
MOQ: 1 |

AD7440BRM Ulas

The Analog Devices AD7440BRM is a 10-bit, 1 MSPS successive-approximation analog-to-digital converter with a fully differential analog input, operating from a single 3 V or 5 V supply in an 8-pin MSOP package. It combines one-channel conversion, SPI-compatible serial output, low power consumption, and an industrial temperature range of -40°C to +85°C.

An SAR ADC is a sampling analog-to-digital converter that compares the input voltage with an internal DAC and performs successive approximation during each conversion. As a type of ADC, it belongs to the data-converter hierarchy and ultimately to the broader semiconductor and signal-processing markets. Its SAR architecture is well suited to precision measurement, industrial instrumentation, and control systems where modest conversion speed and compact implementation are more important than very high sample rates.

The AD7440 offers 10-bit resolution at 1 MSPS through its fully differential input architecture. Differential operation helps reject common-mode voltage and reduces sensitivity to noise when the source is balanced around a common reference level. The converter can operate from either a 3 V or 5 V supply, allowing it to fit both low-voltage embedded systems and conventional industrial analog circuits.

Low power is a core operating characteristic. According to the AD7440 family information, operation from a 3 V supply permits maximum power consumption of 4 mW at a throughput rate of 1 MSPS. This low figure reflects the use of advanced low-power design techniques. The SAR conversion principle supports repeated sampling and acquisition while limiting the average power required from the supply.

Typical applications include industrial process measurement, sensor-interface circuits, portable instrumentation, battery-powered data acquisition, motor and power-system monitoring, and embedded control systems. The differential input can simplify conditioning around sensors whose outputs are centered on a reference voltage rather than ground. The SPI-compatible interface also makes the device suitable for systems that already include a microcontroller or another serial master.

When laying out the circuit, treat the analog input, reference, and ground paths as sensitive nodes. Keep input and reference routing short, use a quiet ground plane, and place input and reference bypass capacitors close to the device. The 8-pin MSOP footprint supports compact designs, but careful decoupling and return-current control remain necessary to realize the converter's specified performance.

This page combines manufacturer specifications, commercial availability, replacement guidance, package information, and practical design notes. It also distinguishes a true drop-in replacement from a higher-resolution family member and identifies which technical details should be confirmed in the manufacturer datasheet before a design is released.

Mga alternatibo na pwedeng ilagay na AD7440BRM — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD7440BRM (parehas na form factor at footprint) — pagkakaiba sa Operating Temperature, Resolution.

Analog Devices
Operating Temperature: -40 C to +85 C (Industrial)
Resolution: 12 bits
Ikabit sa AD7440BRM →

AD7440BRM-REEL7

✅ Drop-In
📦 8-pin MSOP (RM-8)
Same 10-bit, 1 MSPS conversion specifications and 8-pin MSOP footprint; reel configuration differs by 0% in key electrical ratings

📋 Alternatibo na Reference (hindi sa katalogo)

AD7440BRMZ

✅ Drop-In
📦 8-pin MSOP (RM-8)
Same 10-bit, 1 MSPS conversion specifications and 8-pin MSOP footprint; lead-finish designation differs by 0% in key electrical ratings

📋 Alternatibo na Reference (hindi sa katalogo)

AD7450ARZ-REEL

✅ Drop-In
Analog Devices
📦 8-pin MSOP (RM-8)
12 bits · SAR (Successive Approximation) · 1 · Differential (Pseudo-Differential option) · -2 V to +2 V (VREF = 2.5 V, VDD = 5 V) · 1 MSPS @ VDD=5V; 833 kSPS @ VDD=3V · 2.7 V to 5.25 V (single supply) · 100 mV to 3.5 V (external)

Magkontak para sa presyo

Tingnan ang Datasheet →

AD7440BRM Mga Pinakamataas na Rating at Electrical Characteristics

Converter Type Successive-approximation ADC (SAR)
Pangangasiwaan 10 bit
Rate ng Pagkupita 1 MSPS
Input Architecture Fully differential, 1 channel
Volte ng Pagbibigay 3 V or 5 V
Maximum Power Consumption 4 mW at 1 MSPS with a 3 V supply
Interface SPI
Temperature na Operasyon -40°C to +85°C
Packhaging 8-pin MSOP (RM-8)
Uri ng Pagpapasok Surface mount
Analog Input Count 1 channel
Output Word Width 10 bit
Conversion Throughput 1 million samples per second

Gabay sa Pin Configuration ng AD7440BRM 8-pin msop (rm-8)

Pin configuration para sa AD7440BRM (8-pin msop (rm-8) package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin msop (rm-8) package para sa AD7440BRM

Wala ng detalyadong pinout data na magagamit para sa AD7440BRM.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD7440BRM ay nararapat para sa 6 aplikasyons: Industrial Sensor Signal Acquisition, Battery-Powered Portable Instrument, Process Control Monitoring, Power System Monitoring, Embedded Control Data Acquisition, Precision Diagnostic Equipment.

🏭

Industrial Sensor Signal Acquisition

The AD7440BRM fits industrial sensor acquisition when the measured signal requires 10-bit resolution and a throughput of up to 1 MSPS. Its fully differential input is useful when the sensor output is centered around a common-mode reference, helping the converter process the intended differential voltage rather than a large shared voltage. Place the converter close to the sensor-conditioning network, keep the input traces short, and bypass the reference locally. The maximum 4 mW power consumption at 1 MSPS from a 3 V supply also limits the converter's contribution to a distributed measurement node's thermal and battery budget.

🔧

Battery-Powered Portable Instrument

The AD7440BRM is appropriate for battery-powered portable instruments because its 10-bit SAR converter can operate from 3 V and consumes no more than 4 mW at 1 MSPS. The SAR architecture provides a practical balance between conversion rate, resolution, and power when continuous acquisition is not required. A duty-cycled acquisition strategy can reduce average energy use further by keeping the converter and its reference inactive between measurements. Designers should include the external reference, protection network, and serial controller in the complete power calculation rather than evaluating only the ADC.

🏭

Process Control Monitoring

The AD7440BRM can serve as the analog front end of a process-control monitoring channel when 1 MSPS throughput is adequate for dynamic pressure, temperature, or position signals. A fully differential input supports conditioning stages that reject common-mode noise, while the SPI-compatible interface allows a controller to collect conversion results over a short serial link. For reliable sampling, establish a clean analog ground, keep the differential input route compact, and place reference bypass capacitance next to the converter. The 10-bit code width gives 1024 quantization levels across the selected input and reference range.

⚡

Power System Monitoring

The AD7440BRM is suitable for monitoring a scaled power-system voltage when the design requires differential input handling and a 1 MSPS sampling ceiling. The converter can capture a conditioned representation of bus or converter output while its SPI interface transfers results to a supervisory controller. A differential front end helps reject shared switching-node noise, but the analog and digital grounds still need careful partitioning. Use the lowest practical input bandwidth, locate input filtering close to the device, and verify that every attenuated signal remains within the datasheet's common-mode and differential-range limits.

🧩

Embedded Control Data Acquisition

The AD7440BRM fits embedded control systems that periodically acquire an analog command, diagnostic, or feedback value and communicate it through a serial interface. At 10-bit resolution and 1 MSPS throughput, the converter provides ample speed for many control loops while keeping the circuit compact in an 8-pin MSOP. The SPI-compatible interface supports connection to a microcontroller-based controller, while operation from 3 V or 5 V accommodates multiple system rails. For noise-sensitive control nodes, provide local reference bypassing and route digital clock and serial signals away from the differential input path.

💊

Precision Diagnostic Equipment

The AD7440BRM can be used in diagnostic equipment when 10-bit resolution is sufficient for the measured quantity and low-power SAR conversion is valuable. The fully differential input permits the front end to present a centered signal, and the 1 MSPS maximum rate supports acquisition of rapidly changing diagnostic waveforms without requiring a high-power flash converter. A 10-bit result provides 1024 codes, so the useful measurement resolution still depends on input-range selection, reference accuracy, noise, and calibration. For tests requiring finer quantization, evaluate the 12-bit AD7450A family member before finalizing the analog front end.

Buod ng mga Inirekomendang Produkto

AD7440BRMZ Same-family AD7440 orderable form Ginagamit sa: Industrial Sensor Signal Acquisition, Process Control Monitoring, Embedded Control Data Acquisition AD7450A Higher-resolution family option Ginagamit sa: Industrial Sensor Signal Acquisition, Battery-Powered Portable Instrument, Process Control Monitoring, Power System Monitoring, Embedded Control Data Acquisition, Precision Diagnostic Equipment AD7440BRM-REEL7 Same-device tape-and-reel order form Ginagamit sa: Battery-Powered Portable Instrument, Power System Monitoring, Precision Diagnostic Equipment
What is the AD7440BRM?
The AD7440BRM is a 10-bit, 1 MSPS fully differential successive-approximation ADC in an 8-pin MSOP package. According to the Analog Devices AD7440 product page and manufacturer datasheet, it accepts one differential analog input, operates from a single 3 V or 5 V supply, and provides an SPI-compatible serial interface. Its combination of low throughput power and compact packaging suits instrumentation, data-acquisition, and embedded control systems.
What are the key specifications of AD7440BRM that engineers should know?
The AD7440BRM provides 10-bit resolution, a maximum sampling rate of 1 MSPS, one fully differential input channel, and single-supply operation at 3 V or 5 V. According to the Analog Devices manufacturer datasheet, maximum power consumption is 4 mW at 1 MSPS when operating from 3 V. The device is offered in an 8-pin MSOP package and is specified for an industrial temperature range of -40°C to +85°C.
Where can I download the AD7440BRM datasheet PDF?
The official AD7440BRM datasheet and supporting product information are available from the Analog Devices product page linked on this page. The manufacturer page is the preferred source because it connects the AD7440 device family with its electrical characteristics, ordering information, and package documentation. Use the pin-description table and reference configuration in the datasheet when assigning PCB signals and calculating analog input range.
Where can I find the AD7440BRM pinout?
The AD7440BRM uses an 8-pin MSOP package identified as RM-8, and its complete signal assignment is shown in the pin-description table of the Analog Devices manufacturer datasheet. Use that table to identify supply, ground, analog input, reference, and serial-interface signals. Because the complete pin map is not published in the accessible product-page excerpt, confirm every connection against the datasheet before fabrication.
Is the AD7440BRM suitable for battery-powered data acquisition?
Yes, the AD7440BRM is suitable for battery-powered acquisition when 1 MSPS throughput is sufficient. According to the Analog Devices manufacturer datasheet, it consumes no more than 4 mW at 1 MSPS from a 3 V supply. The 10-bit SAR architecture supports repeated measurements with compact circuitry, while the fully differential input can be useful for sensor signals referenced to a common-mode voltage. Power budget calculations should also include external references, signal conditioning, and the digital controller.
What is the difference between AD7440BRM and AD7440BRMZ?
The AD7440BRM and AD7440BRMZ are orderable forms of the AD7440 10-bit, 1 MSPS differential SAR ADC and use the same 8-pin MSOP electrical platform. Their core conversion performance is the same; the distinguishing order-code detail is packaging or lead-finish configuration rather than a change in resolution or sampling rate. Confirm the exact suffix, tape orientation, and reel configuration in the Analog Devices ordering information before substitution.
What is the best drop-in replacement for AD7440BRM?
AD7440BRM-REEL7 is the closest verified drop-in choice because it retains the 8-pin MSOP package and the same AD7440 10-bit, 1 MSPS functional platform. AD7440BRMZ is another same-family orderable form with equivalent conversion specifications. Neither choice should be treated as a higher-resolution upgrade: AD7450A offers 12-bit resolution and requires its own accuracy, timing, and system-level verification before use as a replacement.
Can AD7440BRMZ replace AD7440BRM without PCB changes?
Yes, AD7440BRMZ can be used as a drop-in electrical replacement for AD7440BRM because both are AD7440-family devices in the 8-pin MSOP package with 10-bit resolution and 1 MSPS operation. Check the manufacturer ordering table to confirm tape orientation, lead finish, and the exact variant being qualified. Also verify that the replacement is the specified operating-temperature and compliance grade for the finished assembly.
AD7440BRM vs AD7450A — which is better for precision measurement?
The AD7450A is preferable when a design needs 12-bit conversion resolution, while the AD7440BRM is the direct choice for a 10-bit, 1 MSPS SAR measurement channel. According to the Analog Devices product page, both belong to related high-speed, low-power SAR converter families and operate from 3 V or 5 V. AD7450A is not automatically interchangeable because resolution changes noise, quantization error, reference requirements, and potentially the system calibration approach.
When should I choose AD7440BRM over AD7450A?
Choose the AD7440BRM when 10-bit resolution is sufficient, the required throughput is 1 MSPS, and a compact 8-pin MSOP implementation is desirable. Choose the AD7450A when the measurement resolution must increase to 12 bits or when the resulting reduction in quantization error is important. The decision should be based on sensor accuracy, acceptable least-significant-bit size, reference quality, and the downstream digital processing required for each resolution.
Where can I buy AD7440BRM online?
The AD7440BRM can be requested through the Request a Quote form on this page. The form is the appropriate route for current availability, exact suffix confirmation, packaging requirements, lead time, and order quantities. The manufacturer product page and the component listing linked in the technical sources can also be used to confirm the device identity and obtain authoritative documentation.
What is the lead time for AD7440BRM?
Current lead time for AD7440BRM should be confirmed through the Request a Quote form on this page. Lead time can vary with the selected order code, reel configuration, production status, and requested quantity. The AD7440 product page identifies the device within Analog Devices' active product family, but a production schedule and current lot availability should be obtained through a formal quotation request.
Is AD7440BRM in stock?
Current stock for AD7440BRM should be checked through the Request a Quote form on this page. Inventory can differ among exact suffixes and packaging configurations, so confirm that the quoted item is AD7440BRM and request the required reel or delivery format. This approach also allows the requested quantity, date code requirements, and traceable manufacturing conditions to be specified in one request.
How should the AD7440BRM analog input be connected?
The AD7440BRM uses a fully differential input, so the signal should be arranged around the selected reference voltage rather than referenced directly to ground. According to the Analog Devices manufacturer datasheet, the interface is differential and the device uses a 3 V or 5 V single supply. Place the input and reference bypass capacitors close to their pins, maintain a quiet analog return path, and follow the reference and input common-mode limits specified in the datasheet.
Is AD7440BRM compliant with RoHS and AEC-Q100?
The RoHS, REACH, AEC-Q100, lead-free, and halogen-free status of AD7440BRM must be confirmed from the manufacturer product documentation or declaration for the exact order code. The -40°C to +85°C industrial operating range does not by itself establish AEC-Q100 qualification. Before using the converter in an automotive, medical, or regulated assembly, obtain the applicable manufacturer declarations and complete the required system-level qualification.

Impormasyon ng Talumpati sa Engineering for AD7440BRM — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD7440BRM when the application needs a compact, low-power, 10-bit SAR converter that supports 1 MSPS and a fully differential input. It is a strong fit for industrial sensors, portable instruments, embedded control nodes, and power-system monitoring where the sensor, reference, and signal-conditioning design can support a common-mode input range within the manufacturer limits. AD7440BRM-REEL7 and AD7440BRMZ are direct same-family choices when a particular reel or lead-finish configuration is required. Select AD7450A when measurement resolution must increase from 10 bits to 12 bits and the system can accommodate the resulting changes in quantization, calibration, and verification. For any drop-in substitution, confirm the exact pinout, supply limits, differential input range, reference arrangement, operating temperature, tape orientation, and production status in the manufacturer documentation before releasing the PCB or purchasing production quantities.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD7440BRM-REEL7 AD7440BRMZ AD7450A
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-pin MSOP (RM-8) 8-pin MSOP (RM-8) 8-pin MSOP (RM-8) 8-pin MSOP (RM-8)
Resolution 10 bit 10 bit 10 bit 12 bit
Sampling Rate 1 MSPS 1 MSPS 1 MSPS 1 MSPS class
Input Architecture Fully differential, 1 channel Fully differential, 1 channel Fully differential, 1 channel Fully differential, 1 channel
Supply Voltage 3 V or 5 V 3 V or 5 V 3 V or 5 V 3 V or 5 V
Interface SPI SPI SPI SPI
Key Difference Baseline 10-bit AD7440 order code Same electrical performance; different reel order code Same electrical performance; different lead-finish order code Resolution increases from 10 bits to 12 bits

Pangunahing mga Pagkakaiba

  • Low converter power at full throughput (kumpara saAD7450A)
  • Direct same-order-code family substitutions (kumpara saAD7440BRM-REEL7)
  • Straightforward footprint-compatible upgrade path (kumpara saAD7450A)

Talaan ng Disenyo

Route the fully differential input as a compact pair with closely matched geometry, and connect the two lines to their respective analog input pins without adding unnecessary stubs. Place input filtering and reference-bypass capacitors close to the AD7440BRM. Keep the SPI clock and data traces on the opposite side of the component from the analog input. A continuous ground plane is preferred, with analog and digital return currents kept from sharing high-current paths.

Do not assume that a 10-bit converter delivers 10-bit absolute system accuracy. The usable result also depends on reference-voltage accuracy, input noise, source impedance, differential common-mode range, and PCB contamination. Confirm the signal's common-mode voltage against the Analog Devices manufacturer datasheet before designing the amplifier or sensor front end. The 3 V or 5 V supply selection must also remain compatible with the chosen reference voltage.

Estimated: at a 3 V supply and 1 MSPS throughput, the manufacturer-rated maximum converter power is 4 mW, corresponding to approximately 1.33 mA of supply current. Use these values for a first-pass ADC power budget, then add the reference, input drivers, protection components, and digital interface load. Duty-cycling the acquisition sequence can reduce average power when continuous 1 MSPS sampling is unnecessary.

Use the SPI serial clock rate specified by the Analog Devices manufacturer datasheet and provide adequate settling time between commands and acquisition. Account for conversion time when scheduling successive samples. If the source has high impedance, include an appropriate buffer or charge reservoir near the ADC so the sampling network can settle within the acquisition interval. This is particularly important at the upper end of the 1 MSPS throughput range.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The accessible product information identifies the industrial temperature range and package but does not explicitly state the requested compliance status. Obtain the manufacturer declaration for the exact order code before use in regulated assemblies.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD7440BRM datasheet AD7440BRM pinout AD7440BRM datasheet pdf AD7440BRM specifications AD7440BRM equivalent AD7440BRM replacement AD7440BRM vs AD7450A AD7440BRM MSOP pinout AD7440BRM application circuit AD7440BRM price AD7440BRM stock Analog Devices AD7440BRM

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD7440BRM AD7440BRM-REEL7 AD7440BRMZ AD7450A successive-approximation ADC SAR ADC analog-to-digital converter data converter semiconductor fully differential input SPI 10-bit resolution 1 MSPS 3 V power supply 5 V power supply 4 mW power consumption MSOP-8 RM-8 surface mount industrial instrumentation sensor interface power supply rejection ratio RoHS REACH AEC-Q100
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ