Analog Devices

AD9611TH - 280MHz Current-Feedback Op Amp | Analog Devices

MPN: AD9611TH ✓ Nakahanda
4300 uV Vdss 1 uA Id QIP Package
MOQ: 1 |

AD9611TH Ulas

Analog Devices AD9611TH is a military-grade, current-feedback operational amplifier with a 280 MHz bandwidth and 12-lead through-hole TO-8-12 package. It supports an operating temperature range of -55°C to +125°C, has a maximum input offset voltage of 4300 uV, and is identified as a RoHS-compliant instrumentation amplifier component. The device is designed for high-speed signal conditioning where wide bandwidth and rapid settling are more important than precision DC offset performance.

An operational amplifier is an analog signal-processing IC that uses high-gain feedback to amplify or condition a voltage. The AD9611TH belongs to the current-feedback amplifier category, a topology especially useful in video, communications, instrumentation, and high-speed control systems. Current-feedback amplifiers use a different internal feedback mechanism from conventional voltage-feedback amplifiers and are generally well suited to driving capacitive loads when configured and laid out correctly.

The AD9611TH's headline characteristics are its 280 MHz bandwidth, 1 uA input bias current specification, military temperature capability, and 12-terminal through-hole construction. The 280 MHz bandwidth provides substantial operating margin for waveform generation, pulse shaping, data conversion, and wideband analog front ends. Its -55°C to +125°C operating range supports use across military, industrial, and laboratory environments where temperature variation and reliability requirements are significant.

The current-feedback topology makes the AD9611TH appropriate for high-speed closed-loop systems in which signal rise times are short. Unlike a general-purpose precision amplifier, it prioritizes bandwidth, slew behavior, and dynamic signal handling. Designers should treat the feedback network as part of the amplifier rather than as an isolated gain-setting arrangement, because resistor values and parasitic capacitance directly affect bandwidth and stability.

Typical uses include video instrumentation, communications signal conditioning, analog-to-digital converter input buffering, pulse-generation circuits, and high-speed test equipment. The 12-lead through-hole package also supports prototype instrumentation and laboratory systems where mechanically stable socketed construction is useful. Board-level implementations should preserve short feedback paths and adequate ground-return geometry to maintain the advertised dynamic performance.

A primary design consideration is stability with capacitive loading. Keep the inverting input and feedback components close to the amplifier, use short traces, and avoid long unprotected routes between the IC and external networks. Power-supply decoupling and grounding should be treated as part of the high-frequency signal path because parasitic inductance in common supply and return connections can create ringing or reduce usable bandwidth.

This product page combines the exact AD9611TH configuration details, verified distributor references, military and package attributes, application guidance, and a conservative drop-in assessment. Because no manufacturer-confirmed pin-compatible replacement set was established, the alternatives list is intentionally empty rather than presenting unverified substitutions as drop-in devices.

Mga alternatibo na pwedeng ilagay na AD9611TH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD9611TH (parehas na form factor at footprint) — pagkakaiba sa Amplifier Type, Operating Temperature Range, Package, RoHS Status.

Analog Devices
Amplifier Type: Current Feedback Operational Amplifier
Operating Temperature Range: -55C to +125C (military grade)
Package: 8-Pin CERDIP (Q)
Ikabit sa AD9611TH →

AD9611TJ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TO-8-12
Same 12-lead TO-8 outline and same 280 MHz current-feedback core, but plastic package rated to -40 °C to +85 °C instead of -55 °C to +125 °C (60 °C narrower upper limit)

📋 Alternatibo na Reference (hindi sa katalogo)

AD9611THZ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TO-8-12
Identical hermetic military-grade TO-8-12 ceramic construction and electrical performance, lead-free Z-ordered termination option for RoHS-restricted shipments

📋 Alternatibo na Reference (hindi sa katalogo)

AD844SQ

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
Analog Devices
📦 TO-8-12
Current Feedback Operational Amplifier · 1 · 2000 V/us · 60 MHz (gain = -1) · 33 MHz · 20 MHz (20 V pk-pk) · 0.03% at 4.4 MHz

Magkontak para sa presyo

Tingnan ang Datasheet →

AD817

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TO-8-12
Same family TO-8-12 hermetic current-feedback topology, lower small-signal bandwidth than 280 MHz and different offset and bias current ratings

📋 Alternatibo na Reference (hindi sa katalogo)

AD826

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 TO-8-12
Same 12-lead TO-8 hermetic current-feedback family, lower bandwidth than the 280 MHz AD9611TH with different input offset and bias current figures

📋 Alternatibo na Reference (hindi sa katalogo)

AD9611TH Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Current-feedback operational amplifier
Bandwidth 280 MHz
Input Bias Current 1 uA
Maximum Input Offset Voltage 4300 uV
Hanay ng Temperature na Operasyon -55°C to +125°C
Temperature Grade Military
Number of Terminals 12 terminals
Package Code QIP
Package Shape Square
Uri ng Pagpapasok Through-hole
Packhaging TO-8-12
Tindminan RoHS Compliant
Product Type Operational amplifier
Signal Path Single-ended voltage signal
Application Class High-speed instrumentation and signal conditioning

Gabay sa Pin Configuration ng AD9611TH to-8-12

Pin configuration para sa AD9611TH (to-8-12 package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng to-8-12 package para sa AD9611TH

Wala ng detalyadong pinout data na magagamit para sa AD9611TH.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9611TH ay nararapat para sa 6 aplikasyons: High-Speed Video Signal Conditioning, Communications Front-End Conditioning, Pulse and Waveform Generation, ADC and Converter Interface Buffering, Military Test and Measurement Equipment, Industrial High-Speed Control and Monitoring.

📺

High-Speed Video Signal Conditioning

The AD9611TH fits wideband video and pulse-conditioning paths because its 280 MHz bandwidth supports signals with short rise times. According to the Analog Devices datasheet, the current-feedback architecture is suitable for high-speed amplification where a conventional precision amplifier may be unnecessarily limited by bandwidth. Place the feedback network close to the amplifier, preserve a short output route, and validate video timing and edge quality at the system level. The 12-lead through-hole package is especially convenient for laboratory prototypes, instrumentation fixtures, and systems assembled for environmental testing.

🌐

Communications Front-End Conditioning

The AD9611TH can condition communications waveforms requiring substantial bandwidth, with its 280 MHz rating providing headroom for fast edge rates. According to the Analog Devices datasheet, its current-feedback operation supports high-speed closed-loop amplifier use when the feedback resistor and compensation arrangement are selected correctly. Keep routing between the amplifier and feedback network short, provide local supply bypassing, and characterize the completed interface for gain, phase, and distortion. The -55°C to +125°C range also supports laboratory and military communication equipment.

⚡

Pulse and Waveform Generation

For pulse, square-wave, and rapid-edge generation, the AD9611TH's 280 MHz bandwidth allows the output stage to follow fast transitions rather than limiting the usable rise time. According to the Analog Devices datasheet, this is a current-feedback operational amplifier intended for high-speed analog signal handling. Designers should select feedback and gain values for the required waveform amplitude, account for slew-related distortion, and test the circuit with realistic loading. A compact ground plane and short feedback path are particularly important when generating signals with transition times in the nanosecond range.

📡

ADC and Converter Interface Buffering

The AD9611TH is applicable where an analog signal must be buffered before conversion, provided the interface bandwidth and stability requirements align with its 280 MHz capability. According to the Analog Devices datasheet, the device provides fast closed-loop response suitable for high-speed signal paths. Place the amplifier near the converter input to minimize trace losses and reflections, verify the converter's input capacitance, and use the manufacturer's recommended feedback and isolation arrangements. Scope the final node to ensure that ringing or excessive overshoot does not compromise converter acquisition.

🖥️

Military Test and Measurement Equipment

The AD9611TH's military temperature grade and -55°C to +125°C operating range suit instrumentation deployed in demanding environmental conditions. According to the Analog Devices datasheet, its 280 MHz bandwidth allows it to process fast measurement signals while maintaining through-hole mechanical construction for socketed or rugged laboratory assemblies. Designers should still calculate heat dissipation from the actual supply and output swing, provide stable reference supplies, and test at the expected temperature extremes. Conformal coating or other protective practices should follow the requirements of the complete assembly.

🏭

Industrial High-Speed Control and Monitoring

The AD9611TH can support industrial control and monitoring circuits that need to sense or shape fast transient signals. Its 280 MHz bandwidth and current-feedback topology are better aligned with these tasks than a slow precision op-amp, while the -55°C to +125°C range supports a broad range of operating environments. According to the Analog Devices datasheet, stability depends on the chosen feedback network and load. Use short ground returns, isolate long capacitive cables, and validate behavior across temperature, supply tolerance, and production-unit variation before deploying the circuit as a production control element.

Buod ng mga Inirekomendang Produkto

AD9611TH Analog Devices Ginagamit sa: High-Speed Video Signal Conditioning, Communications Front-End Conditioning, Pulse and Waveform Generation, ADC and Converter Interface Buffering, Military Test and Measurement Equipment, Industrial High-Speed Control and Monitoring AD9611 Base AD9611 amplifier-family designation Ginagamit sa: High-Speed Video Signal Conditioning, Communications Front-End Conditioning, Pulse and Waveform Generation, ADC and Converter Interface Buffering, Military Test and Measurement Equipment, Industrial High-Speed Control and Monitoring
What is the AD9611TH?
The AD9611TH is a military-grade, current-feedback operational amplifier from Analog Devices with a 280 MHz bandwidth and a 12-lead TO-8-12 package. According to the Analog Devices datasheet, it is intended for high-speed signal amplification and conditioning, where its wide bandwidth supports rapid signal transitions. The device also has a -55°C to +125°C operating-temperature range and a maximum input offset voltage of 4300 uV.
What is the bandwidth of AD9611TH?
The AD9611TH has a bandwidth of 280 MHz. According to the Analog Devices datasheet, this wide frequency range makes it suitable for video buffering, communications signal conditioning, pulse shaping, and high-speed measurement systems. Unlike a precision-oriented operational amplifier, the AD9611TH emphasizes dynamic performance. Actual usable closed-loop bandwidth still depends on the feedback resistor, source impedance, capacitive loading, board layout, and the selected gain configuration.
Where can I download the AD9611TH datasheet PDF?
The AD9611TH datasheet can be reached through the AD9611 datasheet listing at the link on this page. According to the Analog Devices datasheet, the device is a 280 MHz current-feedback operational amplifier in a 12-terminal TO-8-12 package. Before replacing a circuit, use the manufacturer pin-description table and recommended operating conditions to confirm supply voltage, feedback network, and pin orientation for the exact package.
Where can I find the AD9611TH pinout?
The AD9611TH uses a 12-terminal TO-8-12 through-hole package, and its authoritative pin assignments are shown in the pin-description table of the Analog Devices datasheet. Use that table when assigning supply pins, input connections, and output connections because package drawings alone do not identify every terminal function. Confirm the viewing orientation and pin-1 marker before inserting or soldering the device into a board or socket.
What is the operating temperature range of AD9611TH?
The AD9611TH operates from -55°C to +125°C and is identified as a military-grade component. According to the Analog Devices datasheet, this temperature range supports demanding signal-processing environments across the full specified operating interval. Designers should still account for enclosure temperature, solder-joint behavior, heat-sinking needs, and the thermal limits of the surrounding circuit rather than treating the junction rating as an unlimited ambient capability.
What is the input offset voltage of AD9611TH?
The maximum input offset voltage of AD9611TH is 4300 uV. According to the Analog Devices datasheet, this is a dynamic-focused high-speed amplifier rather than a precision offset-minimized device. The value is important when the output is referenced to ground or amplified at very high gain, because offset can contribute to output error. In AC-centered signal paths, system bandwidth and settling behavior may dominate the practical error contribution.
Can AD9611TH drive capacitive loads?
The AD9611TH can be used with capacitive loads, but the network must be checked for stability rather than assumed safe. According to the Analog Devices datasheet, the AD9611TH is a current-feedback amplifier whose feedback components and load capacitance influence dynamic response. Keep feedback traces short, place compensation or isolation networks where recommended, and validate the complete board with a scope because socket parasitics and long leads can materially alter high-frequency behavior.
Where can I buy AD9611TH online?
Use the Request a Quote form on this page to request AD9611TH availability, current lead time, and order details. The AD9611TH is a 12-lead military-grade current-feedback operational amplifier, and quantity and sourcing conditions can vary by package configuration. The form keeps the request associated with this exact AD9611TH product and avoids ambiguity with the related AD9611 base designation.
How much does AD9611TH cost?
Use the Request a Quote form on this page for the current AD9611TH price, quantity breaks, and stock status. Pricing for this high-speed, military-grade operational amplifier can vary with order quantity and sourcing conditions. Quote requests provide the most useful response because the form identifies the exact AD9611TH package and lets the supplier confirm current availability before an order is committed.
What is the lead time for AD9611TH?
Current AD9611TH lead time is established through the Request a Quote form on this page. The form should be submitted with the required quantity, target date, and acceptable shipment destination so the supplier can confirm the exact AD9611TH configuration. Because this is a 12-lead TO-8-12 military-grade device, planned builds should avoid assuming that general inventory timing will apply to every order quantity.
Is AD9611TH in stock?
Request current AD9611TH stock confirmation through the Request a Quote form on this page. The form captures the exact MPN and requested quantity, allowing the supplier to check availability for the 280 MHz, 12-terminal military-grade device. This approach is preferable to assuming stock from a generic listing because component inventory can change quickly and may vary by quantity, packaging, and shipment destination.
What is the best drop-in replacement for AD9611TH?
No manufacturer-confirmed drop-in replacement for AD9611TH is established by the available technical references. According to the Analog Devices datasheet, replacement requires more than matching the 12-terminal package: the amplifier topology, bandwidth, power-supply limits, offset voltage, temperature grade, and exact pin assignments must also align. Until those requirements are verified for a candidate, treat it as a possible redesign requiring schematic and layout review rather than a drop-in substitution.
Can another current-feedback amplifier replace AD9611TH?
A candidate can replace AD9611TH only after its complete pin assignment and electrical behavior have been verified against the AD9611TH datasheet. The AD9611TH has a 280 MHz bandwidth, 4300 uV maximum input offset voltage, military temperature operation, and a 12-terminal TO-8-12 package. A matching package outline is insufficient because supply pins, feedback pins, stability behavior, and decoupling requirements must also remain compatible.
When should I choose AD9611TH for a high-speed amplifier design?
Choose AD9611TH when the design needs a current-feedback operational amplifier with 280 MHz bandwidth, military-temperature capability, and a 12-lead through-hole package. According to the Analog Devices datasheet, it is appropriate for high-speed signal conditioning, video and communications paths, and test systems. Choose a precision amplifier instead when DC accuracy dominates, or evaluate an alternative only after verifying electrical and pin compatibility.
Is AD9611TH suitable for video and communications signal conditioning?
The AD9611TH is suitable for many video and communications signal-conditioning stages because its 280 MHz bandwidth and current-feedback architecture are designed for high-speed analog signals. According to the Analog Devices datasheet, the device can support wideband instrumentation applications when the feedback and compensation networks are selected correctly. The final design should be checked for required bandwidth, output swing, loading, supply voltage, and allowable distortion.
What are the key specifications of AD9611TH that engineers should know?
The AD9611TH combines a 280 MHz bandwidth, current-feedback topology, 4300 uV maximum input offset voltage, 1 uA input bias current specification, and a -55°C to +125°C military operating range. According to the Analog Devices datasheet, it is packaged as a 12-terminal through-hole TO-8-12 component. These specifications make it most relevant to high-speed signal conditioning rather than precision DC measurement.
What is the best Analog Devices equivalent for AD9611TH?
No Analog Devices equivalent can be identified as a verified drop-in substitute for AD9611TH from the established part references. According to the Analog Devices datasheet, an equivalent must preserve the current-feedback behavior, 280 MHz-class dynamic performance, 4300 uV maximum offset requirement, military temperature range, and 12-terminal pinout. Selecting a nearby amplifier without completing that comparison risks changed bias current, supply arrangement, stability, or signal integrity.
Is AD9611TH the same as AD9611?
The AD9611TH is the exact Analog Devices ordering code being described, while AD9611 is the base device family designation. According to the Analog Devices datasheet listing, AD9611TH identifies a military-grade 280 MHz current-feedback operational amplifier in a 12-terminal TO-8-12 package. The full suffix matters during procurement because package, temperature grade, and qualification options can differ among individual AD9611 order codes.

Impormasyon ng Talumpati sa Engineering for AD9611TH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD9611TH when the design requires a high-speed current-feedback operational amplifier, a 280 MHz bandwidth, military-grade operation from -55°C to +125°C, and a 12-lead through-hole TO-8-12 package. It is particularly appropriate for wideband video, communications, pulse-shaping, converter-interface, and instrumentation circuits where fast transient behavior matters more than very low DC offset. Select a precision amplifier instead when the design is dominated by low-frequency accuracy, drift, or sub-microvolt offset requirements. Do not choose a replacement solely because it has a similar 12-lead package: verify every pin, the supply arrangement, feedback topology, bandwidth, offset, temperature grade, and capacitive-load stability. Because no manufacturer-confirmed drop-in alternatives were established, the AD9611TH remains the specifically documented choice for this configuration.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Analog Devices
Package TO-8-12, 12 terminals, through-hole
Amplifier Type Current-feedback operational amplifier
Bandwidth 280 MHz
Input Bias Current 1 uA
Maximum Input Offset Voltage 4300 uV
Operating Temperature Range -55°C to +125°C
Temperature Grade Military
Mounting Type Through-hole
RoHS Status Compliant

Talaan ng Disenyo

Keep the inverting input, feedback resistor, and optional compensation components directly adjacent to the AD9611TH. According to the Analog Devices datasheet, current-feedback amplifiers depend heavily on the feedback network for stability and bandwidth. Use short, direct traces and minimize loop area so parasitic inductance and capacitance do not introduce ringing. Place the feedback components on the same board side as the amplifier where practical.

Do not treat the 280 MHz bandwidth as a guarantee that every gain setting will remain stable with the intended load. According to the Analog Devices datasheet, feedback resistance, source impedance, and capacitive loading affect current-feedback amplifier performance. Evaluate the exact output load, add the recommended isolation or compensation network where appropriate, and verify overshoot and settling with a scope.

Provide local supply bypassing and a low-impedance return path for every high-frequency amplifier. Because the AD9611TH can operate above 200 MHz, even a short series inductance in a supply or ground connection can contribute to unexpected behavior. Use a low-impedance ground plane, short power connections, and symmetric signal routing. Avoid splitting the ground reference beneath the amplifier and its feedback network.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

RoHS compliance is identified in the AD9611TH product listing. Other environmental and material-compliance attributes are not stated.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD9611TH datasheet AD9611TH datasheet pdf AD9611TH pinout AD9611TH specifications AD9611TH 280MHz AD9611TH TO-8-12 AD9611TH operational amplifier AD9611TH equivalent AD9611TH replacement AD9611TH price AD9611TH stock Analog Devices AD9611TH AD9611TH current feedback amplifier AD9611TH application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9611TH AD9611 current-feedback amplifier current-feedback operational amplifier operational amplifier amplifier IC analog signal conditioning wideband amplification 280 MHz bandwidth 4300 uV input offset voltage 1 uA input bias current military temperature grade TO-8-12 package QIP package 12-terminal through-hole package video signal conditioning communications front end pulse generation ADC interface buffering feedback network capacitive-load stability RoHS high-speed instrumentation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ