AD842KH - 80MHz Wideband High-Output Op Amp | Analog Devices
MPN: AD842KH ✓ NakahandaAD842KH Ulas
An operational amplifier is a high-gain analog signal-conditioning component used to amplify voltage differences, buffer sensors, drive analog-to-digital converters, and implement active filters. The AD842 belongs to the operational-amplifier hierarchy within analog and mixed-signal semiconductors. It is fabricated with Analog Devices' junction-isolated complementary bipolar process, combining dc precision with wideband ac performance.
Key features include stable operation at gains of 2 or greater, an 80 MHz gain-bandwidth product, and 375 V/µs slew rate. The amplifier settles to within 0.01% following a 10 V step, making it useful in systems requiring rapid recovery after a large input transition. Its 6.0 MHz full-power bandwidth supports high-amplitude waveform amplification, while the 1 mV maximum input offset voltage supports accurate dc-coupled signal conditioning.
The junction-isolated complementary bipolar architecture is designed to provide wideband operation while retaining low offset voltage. When configured for a gain of 2, the AD842 provides its specified 80 MHz gain-bandwidth product. The 375 V/µs slew rate supports high-frequency signal movement, and the 6.0 MHz full-power bandwidth applies to a 20 V peak-to-peak output. Engineers should use the manufacturer datasheet for gain, output-current, supply-voltage, noise, and stability limits before finalizing a circuit.
Typical uses include video and imaging signal chains, waveform generation, data-acquisition front ends, high-speed instrumentation, and active analog filtering. The fast settling characteristic is particularly useful when the amplifier must recover quickly after a step input. The hermetic TO-8-12 package also makes the device suitable for legacy industrial, aerospace, and test systems where through-hole packaging and established qualification practices are important.
The primary design consideration is stability at the selected closed-loop gain. Because the AD842 is stable at gains of 2 or greater, circuits should preserve that gain condition and account for parasitic capacitance, board routing, load capacitance, and power-supply decoupling. Short feedback paths, a compact ground return, and locally placed bypass capacitors help control high-speed feedback loops and reduce ringing.
This page organizes the manufacturer's electrical characteristics, package information, practical application guidance, and same-package upgrade options into a design-focused reference. It also identifies where detailed operating conditions or alternative-device data require direct review of the AD842 datasheet before production release.
Mga alternatibo na pwedeng ilagay na AD842KH — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD842KH (parehas na form factor at footprint) — pagkakaiba sa Gain-Bandwidth Product, Package, Product Type, Supply Voltage Range.
AD842KHZ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD842KQ
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD842KN
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD842JH
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD842JN
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD842JR
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
AD842KH Mga Pinakamataas na Rating at Electrical Characteristics
| Amplifier Type | Single-channel operational amplifier |
| Gain-Bandwidth Product | 80 MHz at gain of 2 |
| Slew Rate | 375 V/µs |
| Settling Time | 0.01% settling for a 10 V step |
| Full-Power Bandwidth | 6.0 MHz at 20 V peak-to-peak output |
| Maximum Input Offset Voltage | 1 mV |
| Offset Voltage Listing Value | 1.5 mV |
| Minimum Stable Gain | 2 |
| Input Bias Current | 8 µA |
| Packhaging | TO-8-12 |
| Process Technology | Junction-isolated complementary bipolar (CB) process |
| Number of Channels | 1 channel |
Gabay sa Pin Configuration ng AD842KH to-8-12
Pin configuration para sa AD842KH (to-8-12 package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD842KH.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD842KH ay nararapat para sa 6 aplikasyons: Data-Acquisition Front Ends, Video and Imaging Signal Chains, Waveform Generation, Precision Instrumentation, Active Analog Filters, Legacy Industrial Equipment.
Data-Acquisition Front Ends
The AD842KH fits precision data-acquisition front ends that need to condition sensor or instrumentation signals before sampling. Its 80 MHz gain-bandwidth product at a gain of 2 provides useful bandwidth, while fast settling to within 0.01% after a 10 V step reduces recovery error before the next conversion. The device should be used at a closed-loop gain of 2 or greater and configured with short, well-controlled feedback paths. Engineers should also evaluate input offset drift, noise, supply range, and output drive against the acquisition accuracy and bandwidth requirements.
Inirekomenda
Video and Imaging Signal Chains
The AD842KH is appropriate for legacy video and imaging boards requiring wideband voltage amplification without changing the established through-hole architecture. Its 80 MHz gain-bandwidth product supports high-frequency signal paths, and the 375 V/µs slew rate helps reproduce rapid transitions without excessive rise-time distortion. A full-power bandwidth of 6.0 MHz is specified at a 20 V peak-to-peak output, so the operating amplitude must be considered when evaluating large-signal performance. Output loading, cable capacitance, and the selected gain should be validated in the finished circuit.
Inirekomenda
Waveform Generation
The AD842KH is useful in high-speed waveform-generation and active-driver circuits where slew rate and settling influence signal fidelity. Its 375 V/µs slew rate supports rapid output transitions, while the 0.01% settling specification for a 10 V step helps the amplifier return accurately to its intended level. Designers should preserve stable operation at gains of 2 or greater and verify output-current capability against the load. Supply bypassing, grounding, and feedback-loop geometry become especially important when large voltage steps are expected.
Inirekomenda
Precision Instrumentation
The AD842KH can serve as the amplification stage in precision instrumentation that combines dc accuracy with wideband response. Its maximum input offset voltage is listed as 1 mV, and the junction-isolated complementary bipolar process provides the intended combination of dc precision and ac performance. For instrumentation, engineers should pair that headline offset specification with the exact input-offset-drift and noise limits in the manufacturer datasheet. Stable gains of 2 or greater, short feedback paths, and a low-impedance ground connection will support predictable operation.
Inirekomenda
Active Analog Filters
The AD842KH is applicable to active analog-filter implementations requiring an amplifier that can operate at gain of 2 or greater with substantial bandwidth. Its 80 MHz gain-bandwidth product at gain of 2 gives the circuit designer access to wideband closed-loop response, and the 375 V/µs slew rate supports larger-amplitude signals. Filter performance can still be affected by resistor tolerances, parasitic capacitance, output loading, and power-supply noise. The component's 1 mV maximum input offset voltage also matters for filters designed around low-frequency precision.
Inirekomenda
Legacy Industrial Equipment
The AD842KH is a practical choice for legacy industrial equipment that retains TO-8-12 through-hole amplifier positions and requires a modern family member with proven wideband performance. The 80 MHz gain-bandwidth product, 375 V/µs slew rate, and fast 0.01% settling characteristic support instrumentation and control-adjacent signal paths without a board-format redesign. Migration decisions should confirm operating-temperature requirements, supply voltage, output-current demand, and the exact suffix-specific qualification. Component selection alone is not enough; thermal environment and production-test requirements must also be reviewed.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD842KH — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD842KHZ | AD842KQ | AD842KN | AD842JH | AD842JN | AD842JR |
|---|---|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | TO-8-12 | TO-8-12 | TO-8-12 | TO-8-12 | TO-8-12 | TO-8-12 | TO-8-12 |
| Gain-Bandwidth Product | 80 MHz at gain of 2 | 80 MHz at gain of 2 | 80 MHz at gain of 2 | 80 MHz at gain of 2 | 80 MHz at gain of 2 | 80 MHz at gain of 2 | 80 MHz at gain of 2 |
| Slew Rate | 375 V/µs | 375 V/µs | 375 V/µs | 375 V/µs | 375 V/µs | 375 V/µs | 375 V/µs |
| Settling | 0.01% for a 10 V step | 0.01% for a 10 V step | 0.01% for a 10 V step | 0.01% for a 10 V step | 0.01% for a 10 V step | 0.01% for a 10 V step | 0.01% for a 10 V step |
| Full-Power Bandwidth | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output | 6.0 MHz at 20 V peak-to-peak output |
| Maximum Input Offset Voltage | 1 mV | 1 mV | 1 mV | 1 mV | 1 mV | 1 mV | 1 mV |
| Minimum Stable Gain | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Input Bias Current | 8 µA | 8 µA | 8 µA | 8 µA | 8 µA | 8 µA | 8 µA |
Pangunahing mga Pagkakaiba
- Wideband performance with rapid settling (kumpara saAD842JR)
- High-output-current drive capability (kumpara saAD842JH)
- Legacy-compatible TO-8-12 footprint (kumpara saAD842JN)
Talaan ng Disenyo
Use a closed-loop gain of 2 or greater because the AD842 is specified as stable at gains of 2 or above. Using it at unity gain can produce instability that may appear as oscillation, ringing, or an unexpected settling response. Check the final circuit at the intended load capacitance and account for parasitic capacitance introduced by PCB traces, sockets, cables, and the external feedback network.
Route input, output, and feedback connections as short as practical, especially the feedback path from the output to the inverting input. A high-speed amplifier can form an unintended feedback loop when long traces couple output voltage back into the input node. Use a compact ground-return path, place power-bypass capacitors close to the device, and compare layout changes against settling and ringing measurements before production release.
Estimated: the amplifier's dissipation depends on the actual supply voltage, output voltage, quiescent current, and output current, none of which can be fully confirmed from the public result excerpts. Before deployment, calculate P = (VIN - VOUT) × IOUT + VIN × IQ using the circuit's worst-case operating values, then compare the result with the package and ambient-temperature limits in the manufacturer datasheet.
Validate the circuit with a 10 V step because the manufacturer specifies settling to within 0.01% under that condition. Probe the output at the load rather than only at the amplifier pin, use a bandwidth and loading appropriate for the measurement, and check for ringing or charge injection in switches and protection networks. Changes in source impedance, cable length, or load capacitance can alter settling even when the nominal amplifier specifications are unchanged.
Impormasyon ng Pagsunod sa Kautusan
Compliance attributes are not stated in the public manufacturer or distributor result excerpts. Use the current Analog Devices product documentation and declaration of conformity for the exact ordering code.