Analog Devices

AD9623AR - 8-SOIC High-Speed Voltage-Feedback Amp | ADI

MPN: AD9623AR ✗ Tapus ng Buhay
8-pin SOIC Package
MOQ: 1 |

AD9623AR Ulas

Analog Devices AD9623AR is a single, high-speed, wide-bandwidth voltage-feedback operational amplifier packaged in an 8-pin SOIC. The AD9623 belongs to a family of very-high-speed amplifiers designed for demanding signal-chain applications where wide bandwidth, low distortion, and accurate closed-loop response are more important than the low power consumption associated with general-purpose precision amplifiers. Its voltage-feedback architecture supports a conventional feedback network and makes it suitable for systems that require predictable gain-setting behavior.

An operational amplifier is an active semiconductor used to amplify voltage differences. A voltage-feedback amplifier is a specific amplifier topology whose gain and bandwidth behavior are governed primarily by an external feedback network. Within the broader hierarchy, the AD9623AR belongs to the operational-amplifier category, then to the voltage-feedback amplifier family and ultimately to the broader linear and mixed-signal IC market. This positioning distinguishes it from comparators, instrumentation amplifiers, and switching regulators.

The device is identified by eight terminal connections in its surface-mount SOIC package. This compact arrangement supports conventional high-speed layout techniques that require short feedback paths and careful control of parasitic capacitance. Because the package exposes only eight terminals, board planning should preserve the manufacturer’s recommended pin connections and avoid routing high-speed output and feedback nodes through areas containing slow digital signals. The package choice also allows reuse of small-footprint analog PCB patterns when the electrical requirements match.

The AD9623AR is described as a high-speed, low-power voltage-feedback amplifier for demanding applications. Its wide bandwidth makes it relevant to video, communications, instrumentation, signal conditioning, and test-equipment front ends. In these systems, amplifier distortion, gain accuracy, slew behavior, and stable operation with realistic source and load impedances determine whether the signal can be digitized or processed without degradation. The exact performance limits for the selected operating conditions should be taken from the manufacturer datasheet.

Typical design roles include receiver-side signal conditioning, high-speed feedback control, active filtering, video amplification, and intermediate stages in multi-stage analog chains. The AD9623 family architecture is specifically associated with very-high-speed and wide-bandwidth amplification, which differentiates it from conventional low-speed precision op amps intended mainly for instrumentation and sensor interfaces. Designers should select external resistors, loading, and supply arrangements that remain inside the device’s documented operating region.

When designing around the AD9623AR, begin with the manufacturer’s recommended application circuit and pin-description table rather than inferring a generic eight-pin op-amplifier layout. Keep feedback components and output routing short, terminate unused inputs according to the datasheet, and use stable low-inductance decoupling close to the supply terminals. Account for the bandwidth and slew-rate limits at the signal amplitude and frequency of interest so that closed-loop gain does not exceed the stable operating range.

This page organizes the AD9623AR’s device identity, sourcing information, verified alternatives, package details, and engineering guidance into one engineering-oriented reference. It also highlights the limitations of the information visible on the product page: exact numerical limits, pin names, compensation requirements, and approval status should be confirmed against the manufacturer datasheet before a production design is released.

Mga alternatibo na pwedeng ilagay na AD9623AR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD9623AR (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type.

Analog Devices
Package: 8-pin DIP
Product Type: Voltage-feedback operational amplifier
Ikabit sa AD9623AR →
Analog Devices
Package: 8-pin SOIC
Ikabit sa AD9623AR →

AD9624AR

✅ Drop-In
Analog Devices
📦 8-pin SOIC
Wideband voltage-feedback operational amplifier · 1 channel · 1800 MHz · 2200 V/us · 12 uA · 2 mV · 11 V · +5.5 V to +15 V

Magkontak para sa presyo

Tingnan ang Datasheet →

AD9623AR Mga Pinakamataas na Rating at Electrical Characteristics

Product Type Single voltage-feedback operational amplifier
Architecture Voltage feedback
Number of Channels 1 channel
Packhaging 8-pin SOIC
Bilang ng Pin 8 pins
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng AD9623AR 8-pin soic

Pin configuration para sa AD9623AR (8-pin soic package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 8-pin soic package para sa AD9623AR

Wala ng detalyadong pinout data na magagamit para sa AD9623AR.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9623AR ay nararapat para sa 6 aplikasyons: High-Speed Receiver Signal Conditioning, Video Amplification, Active Filtering, Communications Front End, Precision Test and Measurement, Industrial Sensor Interface.

🌐

High-Speed Receiver Signal Conditioning

The AD9623AR fits receiver-side signal conditioning because it is a high-speed, wide-bandwidth voltage-feedback amplifier in an 8-pin SOIC package. Its feedback-defined gain makes it suitable for conditioning a source before digitization or further processing. The key design consideration is maintaining a short feedback loop and low-parasitic output routing, because excessive trace capacitance or loading can alter the intended closed-loop response. Use the manufacturer application circuit as the layout reference, place feedback components close to the device, and select resistor values and load conditions within the documented operating limits.

📺

Video Amplification

The AD9623AR can be evaluated for video amplification where the required signal bandwidth makes general-purpose precision amplifiers unsuitable. As a single voltage-feedback amplifier, it provides a conventional route for setting gain with external components while retaining a compact 8-pin SOIC footprint. Video performance depends on more than nominal bandwidth: evaluate gain error, distortion, output swing, output impedance, and load compatibility at the actual signal amplitude. Keep the feedback network compact and provide local supply bypassing to reduce parasitic effects along the high-speed signal path.

🔧

Active Filtering

The AD9623AR is relevant to active-filter implementations that need a high-speed, wide-bandwidth voltage-feedback stage. Its external feedback network can implement the stage’s transfer behavior, while the 8-pin SOIC package simplifies assembly in compact analog boards. Stability and intended response depend on resistor ratios, source and load impedances, parasitic capacitance, and operating frequency. Build the filter from the manufacturer’s recommended topology, preserve short connections around the feedback components, and verify both amplitude and phase behavior with realistic source termination and load conditions.

📡

Communications Front End

The AD9623AR may be used in a communications front end when a high-speed voltage-feedback amplifier is required ahead of a converter, mixer, or digital processing block. The device’s wide-bandwidth architecture is suitable for carrying signals whose frequency content approaches the practical closed-loop limit. Its 8-pin SOIC package permits compact placement, but trace management remains critical because long output routes, inductive loading, and misplaced bypass capacitance can degrade performance. Confirm amplifier stability, output swing, and source/load compatibility before committing the signal path to production.

📊

Precision Test and Measurement

The AD9623AR is appropriate for high-speed test and measurement signal paths that require controlled gain and bandwidth rather than only low offset or very low bias current. A single voltage-feedback amplifier can form the central element of an attenuator, driver, or conditioning stage around the 8-pin SOIC package. Measurement accuracy depends on the chosen feedback resistors and on how the source and load interact with the amplifier’s documented characteristics. Use precision resistor networks where necessary, minimize connector-to-amplifier distance, and verify the complete measurement chain rather than relying on a nominal bandwidth figure alone.

🏭

Industrial Sensor Interface

The AD9623AR can support a high-bandwidth industrial sensor interface when the sensor output changes too quickly for a conventional low-speed precision amplifier. The voltage-feedback architecture permits application-specific gain selection, and the compact 8-pin SOIC package is useful in dense control hardware. Because industrial environments can introduce large common-mode steps, supply transients, and noisy grounding, the design must follow the device’s documented input and supply limits. Place input conditioning close to the sensor path, use local decoupling, and validate transient response and settling behavior before system-level certification.

What is the AD9623AR?
The AD9623AR is a single voltage-feedback operational amplifier from Analog Devices in an 8-pin SOIC package. According to the manufacturer datasheet, it is a high-speed, wide-bandwidth amplifier intended for demanding signal-chain applications. The device is listed on a datasheet archive as an obsolete part, so engineers should verify lifecycle and sourcing status before beginning a new design.
What are the key specifications of AD9623AR that engineers should know?
The AD9623AR is a single-channel, high-speed, wide-bandwidth voltage-feedback operational amplifier in an 8-pin SOIC package. Its architecture is intended for demanding analog signal chains rather than general-purpose low-speed precision applications. The manufacturer datasheet should be used to confirm bandwidth, slew rate, supply range, distortion, input noise, output swing, and operating-temperature limits for the exact production configuration.
Where can I download the AD9623AR datasheet PDF?
The AD9623 datasheet can be reached through the Analog Devices datasheet link listed on this page, and the AD9623AR-specific datasheet is also indexed by DatasheetQ. For design work, use the manufacturer document as the controlling source for pin assignments, electrical characteristics, recommended operating conditions, and typical application circuits. Archive copies are useful for locating the document but should be checked for document completeness.
Where can I find the AD9623AR pinout?
The AD9623AR pinout must be taken from the manufacturer datasheet’s pin-description table because the product is packaged in an 8-pin SOIC and different high-speed amplifier families can use the same package with different terminal assignments. Do not infer the connections from a generic SOIC-8 drawing. Verify pin 1 orientation, supply terminals, input pins, output, and any no-connect positions against the specific AD9623 diagram before routing copper.
What is the difference between AD9623AR and AD9624AR?
The AD9623AR and AD9624AR are identified as pin- and package-compatible alternatives in the component comparison record, with consistent terminal arrangements and package format. Their functional characteristics are also described as consistent. Because the record does not provide a complete numerical comparison for every electrical limit, engineers should compare bandwidth, slew rate, distortion, noise, supply range, and stability using the two manufacturer datasheets.
Is AD9624AR a drop-in replacement for AD9623AR?
AD9624AR is the closest documented drop-in candidate for AD9623AR because the comparison record states that the terminals and packages are consistent and that replacement does not require modification of the existing circuit. The same record identifies both devices as 8-pin SOIC single voltage-feedback amplifiers. Final qualification should still include gain, bandwidth, supply, output-load, temperature, and stability checks.
What can replace AD9623AR?
AD9624AR is the documented replacement candidate for AD9623AR in the available cross-reference record. It uses the same 8-pin SOIC format and is described as requiring no modification to the existing circuit. Only one candidate is explicitly supported by that record, so a broader replacement claim would require separate component-level verification rather than an assumption based only on amplifier category.
Is AD9623AR the same as AD9624AR?
AD9623AR and AD9624AR are closely related, pin-compatible 8-pin SOIC voltage-feedback amplifiers, but they should not be treated as identical ordering codes without reviewing the exact data sheets. The cross-reference record states that the terminals and packages are consistent and that the main performance parameters and functional characteristics are consistent. Any approved substitution should still be recorded against the original manufacturer part number.
When should I choose AD9623AR over AD9624AR?
Choose AD9623AR when an original or previously qualified design specifically calls for that manufacturer part number and its documented electrical behavior. Choose AD9624AR only when its datasheet confirms that every supply, bandwidth, stability, distortion, noise, and loading requirement satisfies the installed circuit. Because AD9623AR is marked obsolete on a datasheet index, new production designs should also assess whether either amplifier has a supported lifecycle path.
Is AD9623AR suitable for high-speed signal conditioning?
Yes, the AD9623AR is positioned for high-speed signal conditioning because it is a high-speed, wide-bandwidth voltage-feedback amplifier. Its 8-pin SOIC package supports compact analog layouts, while the voltage-feedback topology allows gain to be established with an external feedback network. The selected closed-loop gain and signal amplitude must remain within the stability and slew-rate limits documented by the manufacturer.
How should a high-speed PCB using AD9623AR be laid out?
Keep the feedback network and output route short, place decoupling close to the supply terminals, and minimize parasitic capacitance around high-speed nodes. Use the manufacturer’s recommended application circuit as the layout baseline. According to the manufacturer datasheet’s device classification, the AD9623AR is intended for demanding wide-bandwidth applications, where long traces, excess loading, and poorly placed compensation components can alter gain or stability.
What are the power and thermal considerations for AD9623AR?
The AD9623AR is described as a low-power amplifier within a very-high-speed family, but power dissipation depends on the selected supply voltage, output swing, load, and operating duty cycle. Use the manufacturer datasheet for quiescent current and supply limits, then estimate junction temperature from actual dissipation and the board’s thermal resistance. Avoid using the family description as a substitute for device-level electrical data.
What is the price of AD9623AR?
The current commercial price is presented through the Request a Quote form on this page because market pricing can change with quantity, condition, and availability. The product records used for this page do not publish a qualifying USD quantity-break table for the exact AD9623AR ordering code. Submit the required quantity and packaging information through the quote form for a current purchasing response.
What is the lead time for AD9623AR?
AD9623AR lead time must be confirmed through the Request a Quote form on this page. The available product records identify the device as obsolete and provide inventory-search links, but they do not establish a manufacturer-supported production lead time or a firm quantity allocation. Include the required quantity, date code requirements, and acceptable alternative policy in the request.
Is AD9623AR in stock?
AD9623AR availability is not guaranteed by the presence of an inventory-search listing, and the device is marked obsolete on a datasheet index. Use the Request a Quote form on this page to request current stock, condition, date code, and quantity information. If uninterrupted supply is required, request an approved alternate plan in parallel rather than assuming that every visible listing represents production inventory.
What is the best Analog Devices equivalent for AD9623AR?
AD9624AR is the best directly documented Analog Devices equivalent for AD9623AR because the comparison record identifies matching terminals, package, and consistent functional characteristics. Both are presented as single voltage-feedback amplifiers in 8-pin SOIC packages. The equivalence still requires a datasheet-level review of every operating limit and stability condition before it is approved for production substitution.

Impormasyon ng Talumpati sa Engineering for AD9623AR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD9623AR when an existing design specifically calls for this Analog Devices ordering code, its 8-pin SOIC footprint matches the PCB, and the manufacturer’s electrical limits satisfy the required bandwidth, gain, output swing, load, and temperature conditions. It is particularly relevant to high-speed signal-conditioning, video, communications, active-filter, and test-measurement paths that use a voltage-feedback topology.

Consider the AD9624AR when the AD9623AR is no longer commercially practical and the cross-reference relationship is acceptable for the program. The documented candidate uses the same package and terminals and is described as functionally consistent, making it the preferred documented drop-in path. Nevertheless, approve it only after comparing both manufacturer datasheets and checking stability, distortion, noise, supply, and load behavior. Do not use unrelated amplifier families as substitutions merely because they use an 8-pin SOIC package; a matching footprint alone does not establish electrical compatibility.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD9624AR
Package 8-pin SOIC 8-pin SOIC - same package
Brand Analog Devices Analog Devices
Amplifier Type Single voltage-feedback operational amplifier Single voltage-feedback operational amplifier
Architecture Voltage feedback Voltage feedback
Channel Count 1 channel 1 channel
Pin Count 8 pins 8 pins
Special Features High-speed and wide-bandwidth voltage-feedback amplifier Documented as functionally consistent with AD9623AR

Pangunahing mga Pagkakaiba

  • Established AD9623-family high-speed positioning (kumpara saAD9624AR)
  • Documented pin-compatible replacement path (kumpara saAD9624AR)
  • Compact eight-terminal integration (kumpara saAD9624AR)

Talaan ng Disenyo

Use the manufacturer’s recommended layout as the foundation for the 8-pin SOIC footprint. Keep input, output, and feedback traces short, place feedback components adjacent to the device, and avoid routing high-speed signals beneath or beside unrelated digital and power paths. Preserve the correct pin-1 orientation and verify every connection against the specific AD9623 pin-description table rather than a generic single-amplifier SOIC drawing.

Evaluate the complete signal path with the intended source impedance, load, gain, and signal amplitude. A wide-bandwidth amplifier can become unstable with capacitive loading or with a feedback network that is too large for the selected closed-loop gain. Start with manufacturer-recommended resistor and compensation arrangements, keep parasitic capacitance low, and use controlled-impedance routing when the signal contains high-frequency content.

Place supply decoupling at the device and provide the return path indicated by the application circuit. Validate supply voltage limits, output swing, quiescent current, and maximum output current against the manufacturer datasheet before enabling the circuit. If the output drives a load or cable, isolate the amplifier from excessive capacitive loading and confirm that the load current and transient demand remain inside the documented operating conditions.

Do not select the AD9623AR from the device family description alone. Confirm the exact operating conditions, especially closed-loop gain, supply voltage, output amplitude, frequency, load, and temperature. Also verify the obsolete lifecycle status and obtain written approval for any substitute. The AD9624AR has a documented compatible footprint and functional relationship, but production substitution still requires a comparison of the two manufacturer datasheets.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact AD9623AR ordering code. Confirm these requirements with Analog Devices before production release.

Data napatotohanan sa: 2026-11-10 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD9623AR datasheet AD9623AR datasheet pdf AD9623AR pinout AD9623AR specifications AD9623AR equivalent AD9623AR replacement AD9623AR vs AD9624AR AD9623AR SOIC footprint AD9623AR price AD9623AR stock Analog Devices AD9623AR AD9623AR voltage feedback amplifier AD9623AR high speed amplifier AD9623AR 8 pin SOIC

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9623AR AD9624AR AD9623 AD9621 Operational amplifier Voltage-feedback amplifier Voltage feedback Single amplifier High-speed amplifier Wide-bandwidth amplifier 8-pin SOIC SOIC package Surface mount Signal conditioning Video amplification Active filter Communications front end Test and measurement Industrial sensor interface Feedback network Closed-loop gain Slew rate Gain-bandwidth product
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ