Analog Devices

AD848JR - 175MHz High-Speed Op Amp | Analog Devices

MPN: AD848JR ✓ Nakahanda
4.8 mA Vdss 8-pin SOIC Package
MOQ: 1 |

AD848JR Ulas

The Analog Devices AD848JR is a single, internally compensated, high-speed operational amplifier with a 175 MHz gain-bandwidth product, 300 V/s slew rate, and 4.8 mA supply current in an 8-pin SOIC package. The AD848 is stable in closed-loop gains of 5 or greater, allowing direct use in noninverting and inverting signal-conditioning circuits without an external compensation network. It operates from dual ±4.5 V to ±18 V supplies.

A high-speed operational amplifier is a voltage-feedback amplifier designed to process signals with wide bandwidth, low delay, and fast amplitude transitions. Within the analog IC hierarchy, the AD848 belongs to the operational-amplifier and high-speed amplifier families, combining precision biasing, input stages, output drive, and frequency compensation in one monolithic semiconductor. Its gain of at least 5 makes it particularly useful for video, communications, instrumentation, and pulse-shaping stages requiring more bandwidth than general-purpose precision amplifiers provide.

The principal performance features are a 175 MHz gain-bandwidth product, 300 V/s slew rate, and 4.8 mA supply current. The amplifier settles to 0.1% in 80 ns for a 10 V step, making it useful for waveform capture, pulse amplification, and video gain stages. Its input noise density is listed as 3 nV/√Hz, supporting low-noise high-frequency signal conditioning when appropriate source impedance and bandwidth are maintained.

The AD848 uses internal compensation optimized for closed-loop gains of 5 and above. This is an important architectural distinction from decompensated amplifiers that require higher closed-loop gain. The device is positioned for designers who need substantial operating bandwidth without external compensation and who can accept the minimum-gain constraint. The manufacturer also identifies the AD848 as an enhanced replacement for the LM6164 series and as a pin-for-pin replacement for several high-speed amplifiers in gains of 5 or greater.

Typical applications include video preamplification, high-speed instrumentation, communications receive chains, active filtering, pulse shaping, and analog signal conditioning. It can also serve as a high-speed comparator-like stage when operated in its stable gain region, although feedback, bandwidth, and output-swing requirements remain critical. In systems requiring less than unity or gains below 5, the AD849's decompensated architecture or a unity-gain-stable amplifier should be evaluated instead.

Designers should preserve the minimum closed-loop gain of 5, route feedback components close to the device, and verify capacitive-load stability at the intended gain. Input and output decoupling should follow the manufacturer datasheet recommendations. Power-supply bypassing is particularly important in high-speed systems because supply ripple can couple into the output and compromise settling performance.

This product page combines manufacturer specifications, package and pin information, practical circuit guidance, structured comparisons, and verified substitute information. It is designed to help engineers identify whether the AD848JR's gain stability, bandwidth, power consumption, and 8-pin SOIC footprint fit a new design or replacement requirement.

Mga alternatibo na pwedeng ilagay na AD848JR — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

AD848JRZ

✅ Drop-In
📦 8-SOIC
Electrical ratings and 8-SOIC pinout are unchanged; ordering suffix differs by 0% in the compared performance parameters.

📋 Alternatibo na Reference (hindi sa katalogo)

AD849JR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-SOIC
AD849 has 725 MHz versus 175 MHz gain-bandwidth product, but its minimum stable gain is greater than 24 versus 5 for AD848.

📋 Alternatibo na Reference (hindi sa katalogo)

AD847JR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-SOIC
AD847 is unity-gain stable with a listed 50 MHz gain-bandwidth product, approximately 71% lower than the AD848's 175 MHz.

📋 Alternatibo na Reference (hindi sa katalogo)

AD840JR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-SOIC
AD840 belongs to the same high-speed family but trades the AD848's 175 MHz bandwidth for greater precision and greater output-current drive; exact ratings require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

AD841JR

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 8-SOIC
AD841 offers greater precision and greater output-current drive than AD848 while retaining the family's 8-SOIC footprint; exact ratings require comparison.

📋 Alternatibo na Reference (hindi sa katalogo)

AD848JR Mga Pinakamataas na Rating at Electrical Characteristics

Amplifier Type Single high-speed operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 175 MHz
Slew Rate 300 V/s
Kuru-kuryente ng Pagbibigay 4.8 mA
Minimum Stable Closed-Loop Gain 5
Settling Time to 0.1% 80 ns for a 10 V step
Input Noise Density 3 nV/√Hz
Supply Voltage Range ±4.5 V to ±18 V
Maximum Supply Voltage ±18 V
Compensation Internal compensation
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount

Pin Configuration ng AD848JR

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OFFSET NULL — Offset adjustment input
Pin 2 INVERTING INPUT — Inverting input
Pin 3 NONINVERTING INPUT — Non-inverting input
Pin 4 V- — Negative supply voltage
Pin 5 OFFSET NULL — Offset adjustment input
Pin 6 OUTPUT — Analog output
Pin 7 V+ — Positive supply voltage
Pin 8 NC — Not connected

Tipikal na mga Gamit

AD848JR ay nararapat para sa 6 aplikasyons: Video Signal Preconditioning, High-Speed Communications Receiver, Precision Instrumentation Front End, Pulse Shaping and Edge Conditioning, Active Filtering and Frequency Shaping, Industrial Test and Measurement.

📺

Video Signal Preconditioning

The AD848JR is well suited to video preamplification because its 175 MHz gain-bandwidth product and 300 V/s slew rate preserve wideband signal transitions. It should be used in a closed-loop gain of at least 5 to maintain the stability established by the internal compensation. Placing the amplifier close to the source and keeping feedback tracks short reduces parasitic feedback and ringing. A properly bypassed dual supply also limits supply-to-output modulation that could otherwise appear as visible video noise or timing instability.

🌐

High-Speed Communications Receiver

The AD848JR can amplify communications signals when the receiver stage operates at gain 5 or greater. Its 175 MHz gain-bandwidth product supports broadband waveform fidelity, while the 80 ns settling time to 0.1% for a 10 V step supports rapid decision or sampling systems. The 4.8 mA supply current is useful in power-conscious receivers, but the design must still account for input noise density of 3 nV/√Hz and provide clean, decoupled supplies to avoid degrading receiver dynamic range.

🔧

Precision Instrumentation Front End

For instrumentation requiring a gain of 5 or greater, the AD848JR combines a 175 MHz bandwidth with an 80 ns settling time, enabling rapid acquisition of small signals from sensors and transducers. The 3 nV/√Hz input noise density supports high-frequency measurement work, although actual input-referred noise depends on source impedance, bandwidth, and amplifier configuration. Use short guard traces and controlled grounding around the input stage, and confirm that the selected gain and feedback network meet the required settling specification.

📡

Pulse Shaping and Edge Conditioning

The AD848JR's 300 V/s slew rate and 175 MHz gain-bandwidth product make it effective for conditioning edges and preserving pulse shape in instrumentation and test systems. Its internal compensation is appropriate for closed-loop gains of at least 5, avoiding the need for external compensation components in standard non-inverting or inverting configurations. Keep the feedback loop compact and verify output swing for the required pulse amplitude. If the circuit must operate below gain 5, choose a unity-gain-stable member such as the AD847 instead.

🔊

Active Filtering and Frequency Shaping

The AD848JR can implement active filter stages where the required closed-loop gain is 5 or greater and wide bandwidth is valuable. Its 175 MHz gain-bandwidth product provides more than enough signal path range for many moderate-frequency filter stages, while the 300 V/s slew rate supports large-signal tests. Component tolerances and op-amp behavior remain important at high Q, so simulate the complete filter with its intended feedback network. Maintain short feedback paths and use decoupling close to the supply pins to minimize unintended high-frequency behavior.

🏭

Industrial Test and Measurement

The AD848JR suits wideband industrial test and measurement systems that need rapid settling and a gain of at least 5. Its 175 MHz gain-bandwidth product, 300 V/s slew rate, and 80 ns settling time support high-speed signal acquisition and conditioning, while dual ±4.5 V to ±18 V operation allows integration with multiple analog front-end levels. Thermal design should account for the package dissipation at sustained output current, and the system should provide stable references and local bypass capacitors. The amplifier's gain threshold must be checked across the complete test range.

Buod ng mga Inirekomendang Produkto

AD849JR Higher-bandwidth decompensated family alternative for gains above 24 Ginagamit sa: Video Signal Preconditioning, High-Speed Communications Receiver, Pulse Shaping and Edge Conditioning, Industrial Test and Measurement AD847JR Unity-gain-stable family alternative for lower-bandwidth video stages Ginagamit sa: Video Signal Preconditioning, Pulse Shaping and Edge Conditioning, Industrial Test and Measurement AD848JRZ Lead-free ordering option for the same AD848 core and pinout Ginagamit sa: High-Speed Communications Receiver AD840JR Higher-precision family option with greater output-current drive Ginagamit sa: Precision Instrumentation Front End, Active Filtering and Frequency Shaping AD841JR Higher-precision high-speed family option Ginagamit sa: Precision Instrumentation Front End, Active Filtering and Frequency Shaping
What are the key specifications of AD848JR that engineers should know?
The AD848JR is a single, internally compensated high-speed operational amplifier with a 175 MHz gain-bandwidth product, 300 V/s slew rate, 4.8 mA supply current, and operation from ±4.5 V to ±18 V. According to the Analog Devices AD848/AD849 manufacturer datasheet, it is stable at closed-loop gains of 5 or greater and settles to 0.1% within 80 ns for a 10 V step. It is supplied in an 8-pin SOIC package.
Where can I download the AD848JR datasheet PDF?
The official AD848JR datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD848.pdf. The manufacturer datasheet covers the AD848 and AD849 family, including the AD848's internal compensation, minimum stable gain of 5, supply-current characteristics, settling behavior, and application information. Use the pin-description table in that datasheet when assigning PCB tracks.
Where can I find the AD848JR pinout?
The AD848JR uses an 8-pin SOIC package, with the exposed-side numbering shown by the soic-8 package diagram. According to the Analog Devices manufacturer datasheet, the standard connections are offset null at pins 1 and 5, inverting input at pin 2, non-inverting input at pin 3, negative supply at pin 4, output at pin 6, positive supply at pin 7, and no connection at pin 8.
What is the minimum gain for the AD848JR?
The AD848JR has a minimum stable closed-loop gain of 5 because its compensation is optimized for gains of 5 and above. According to the Analog Devices AD848/AD849 manufacturer datasheet, this differs from the AD849, which is fully decompensated and stable at gains greater than 24. Do not configure the AD848 as a unity-gain amplifier without verifying stability experimentally or selecting a unity-gain-stable alternative.
What is the gain-bandwidth product of AD848JR?
The AD848JR has a gain-bandwidth product of 175 MHz. This large closed-loop bandwidth allows the amplifier to operate in relatively high gain stages while preserving signal rise time. The manufacturer datasheet also lists a 300 V/s slew rate and an 80 ns settling time to 0.1% for a 10 V step, making the AD848 suitable for wideband video, communications, and instrumentation signal chains.
What supply voltages does the AD848JR require?
The AD848JR operates from ±4.5 V to ±18 V, allowing dual-supply implementation and operation from lower-voltage analog systems. According to the Analog Devices manufacturer datasheet, both positive and negative supplies are required for the stated dual-supply range. The ±18 V maximum corresponds to a total supply span of 36 V, and decoupling should follow the datasheet layout guidance.
Can AD848JR drive capacitive loads?
The AD848 can drive capacitive loads, but the allowable capacitance and stable operating conditions must be taken from the Analog Devices manufacturer datasheet rather than assumed. High-speed feedback loops can oscillate when driving long PCB traces or isolated capacitors. Keep feedback routing short, place the feedback components close to the amplifier, and verify stability with the intended load and output waveform.
Is AD848JR suitable for video preamplification?
Yes, the AD848JR is suitable for video preamplification when the closed-loop gain is at least 5. Its 175 MHz gain-bandwidth product, 300 V/s slew rate, and 80 ns settling time support wideband signal chains, while the 4.8 mA supply current helps control system power. Video applications should still account for output-swing limits, supply bypassing, and frequency-dependent noise.
What can replace AD848JR?
The AD848JR can be replaced only after confirming package, pinout, supply range, gain stability, bandwidth, and output-drive requirements. The Analog Devices manufacturer datasheet identifies the AD848 as a pin-for-pin replacement for several high-speed amplifiers in applications with gain of 5 or greater, including suitable HA2520 and EL2020 implementations. Verify each candidate's SOIC footprint and electrical limits before substitution.
What is the best Analog Devices equivalent for AD848JR?
The AD848JR is the gain-stable AD848 implementation in an 8-pin SOIC, and the closest family option is the AD848JRZ when lead-free procurement is required. The AD849 is not an equivalent drop-in substitute because it is decompensated for gains greater than 24, while the AD848 requires gain of at least 5. For another manufacturer's replacement, match the actual pinout and closed-loop stability requirements.
AD848JR versus AD849JR: which is better for my application?
Choose the AD848JR when the circuit can use a closed-loop gain of 5 or greater; choose the AD849JR when the required gain exceeds 24 and its decompensated architecture is acceptable. The Analog Devices manufacturer datasheet identifies a 175 MHz gain-bandwidth product for the AD848 family member and 725 MHz for the AD849 family member. The selection must also consider supply current, output drive, and feedback compensation.
When should I choose AD848JR over a unity-gain-stable amplifier?
Choose the AD848JR over a unity-gain-stable amplifier when the signal chain operates at gain 5 or greater and benefits from its 175 MHz bandwidth and internal compensation. A unity-gain-stable device is preferable when the application includes voltage followers, gains below 5, or feedback configurations that do not satisfy the AD848's stability requirement. Confirm the required gain and settling behavior in the target circuit.
Where can I buy AD848JR online?
Use the Request a Quote form on this page to request AD848JR availability, current commercial terms, and the required delivery quantity. The form is the appropriate route for an exact-MPN sourcing request because order quantities and supply status can change. Provide the target package, tube or reel preference, quantity, and any required automotive or environmental documentation.
What is the price of AD848JR?
Request current AD848JR pricing through the Request a Quote form on this page, specifying quantity, package preference, and shipment destination. The manufacturer product page also provides sample, evaluation, and purchase resources for the AD848 family. Current commercial terms should be confirmed at request time because component availability and volume pricing can change.
What is the lead time and stock status for AD848JR?
Request the current AD848JR stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The AD848 is listed in production on Analog Devices' product page, but order-on-request commerce does not by itself guarantee immediate stock. Include your required quantity, approved date code, and packaging preference with the request.
Is AD848JR the same as AD848JRZ?
The AD848JR and AD848JRZ are electrically the same AD848 amplifier in the 8-pin SOIC package, with the suffix and ordering information distinguishing the commercial or packaging details. The package drawing, pinout, and core electrical performance remain unchanged. Confirm the order code, lead finish, package quantity, and current lifecycle terms for the exact suffix required by the production BOM.
Does the AD848JR meet RoHS, REACH, or AEC-Q100 requirements?
Use the current Analog Devices product and material-compliance documentation for a formal RoHS, REACH, or AEC-Q100 determination on the exact AD848JR order code. The functional information for this part is a high-speed, low-power analog amplifier in 8-pin SOIC, and AEC-Q100 qualification is not established by the general-purpose ordering information. Request compliance documentation with the quote when a regulated application requires it.

Impormasyon ng Talumpati sa Engineering for AD848JR — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD848JR for high-speed signal conditioning when the circuit requires a closed-loop gain of 5 or greater and benefits from a 175 MHz gain-bandwidth product, 300 V/s slew rate, and 80 ns settling time. Select AD848JRZ when that ordering code or its commercial and lead-free documentation is required, since the electrical core and SOIC footprint are unchanged. Consider AD849JR only when the circuit operates above gain 24 and can use its 725 MHz decompensated architecture. Use AD847JR when unity-gain stability is essential or bandwidth requirements are modest. For designs emphasizing precision and stronger output-current drive, evaluate AD840JR or AD841JR against the complete signal swing, noise, settling, and stability requirements. Every proposed substitution must be checked for exact pinout, package, supply range, gain threshold, and capacitive-load behavior.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD848JRZ AD849JR AD847JR AD840JR AD841JR
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Specialized Family Feature Gain-stable high-speed operation Same AD848 electrical core Higher gain-bandwidth product Unity-gain stability Greater precision and output-current drive Greater precision and output-current drive

Pangunahing mga Pagkakaiba

  • Provides lower minimum gain than the decompensated family alternative (kumpara saAD849JR)
  • Provides substantially more bandwidth than the unity-gain-stable family member (kumpara saAD847JR)
  • Maintains the same core performance for lead-free ordering (kumpara saAD848JRZ)

Talaan ng Disenyo

Configure the AD848 only at a closed-loop gain of 5 or greater. Its internal compensation is optimized for that range, and using it as a unity-gain follower can compromise stability. Before replacing an existing amplifier, confirm that the circuit's lowest operating gain satisfies this requirement. If gain can fall below 5, choose a unity-gain-stable amplifier or use a decompensated device configured in its specified operating range.

Keep the input, output, and feedback paths compact because the 175 MHz bandwidth can couple loop delay, parasitic capacitance, and supply noise into the signal path. Place input and output decoupling capacitors close to their supply pins, use the shortest practical return connection, and avoid routing high-impedance input traces next to fast output nodes. These layout practices reduce ringing and preserve the advertised settling performance.

Use clean dual supplies within the ±4.5 V to ±18 V operating range and verify the total supply span does not exceed 36 V. Decouple each supply rail locally and check that output-current demand and package dissipation remain acceptable at the highest expected signal amplitude. Although the device's listed supply current is 4.8 mA, the design must also account for load-dependent output-current consumption.

Validate capacitive loading, output swing, and feedback stability at the intended gain and signal amplitude. High-speed amplifiers can oscillate when driving long cables, probe capacitance, or other capacitive loads. Start with the manufacturer's recommended feedback topology, add isolation resistors near the output only when necessary, and verify the final board with an oscilloscope rather than relying only on simulation.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

Formal material-compliance and qualification documents are not stated in the product information. AEC-Q100 is treated as not applicable to this general-purpose operational amplifier ordering code.

Data napatotohanan sa: 2026-11-09 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

AD848JR datasheet AD848JR pinout AD848JR datasheet pdf AD848JR equivalent AD848JR replacement AD848JR cross reference AD848JR footprint AD848JR spice model AD848JR price AD848JR stock Analog Devices AD848JR AD848JR 175MHz op amp AD848JR 8-SOIC pinout AD848JR video preamplifier AD848JR vs AD849JR

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD848JR AD848 AD848JRZ AD849JR AD847JR AD840JR AD841JR operational amplifier high-speed amplifier voltage-feedback amplifier analog IC semiconductor gain-bandwidth product slew rate settling time internal compensation unity-gain stability signal conditioning video preamplification communications receiver instrumentation 8-pin SOIC SOIC family surface-mount package input noise density
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ