Analog Devices

AD977AARS - 16-Bit 200kSPS Serial ADC | Analog Devices

MPN: AD977AARS ✓ Nakahanda
5 V Vdss 28-pin SSOP Package
MOQ: 1 |

AD977AARS Ulas

The Analog Devices AD977AARS is a 16-bit successive-approximation analog-to-digital converter with a 200 kSPS throughput rate, operated from a single 5 V supply and housed in a 28-pin SSOP package. The converter combines a 16-bit SAR core with serial I/O, making it suitable for compact industrial, communications, instrumentation, and embedded data-acquisition systems where sampling accuracy and conversion speed must coexist with limited board space.

An ADC is an interface IC that converts an analog input voltage into a digital code for processing by a microcontroller, DSP, FPGA, or other digital system. In the hierarchy of electronic components, the AD977AARS belongs to the ADC/DAC class, then to the analog-to-digital converter and successive-approximation converter families. Its serial interface reduces the number of signal traces required compared with a parallel ADC, while the 200 kSPS conversion rate supports acquisition rates that are substantially above general-purpose low-speed measurement devices.

The AD977A provides 16-bit resolution, a 200 kSPS throughput rate, and operation from one 5 V supply. Its successive-approximation architecture performs conversion through a sequence of comparisons, combining a deterministic conversion process with low power consumption for a single-supply device. The 28-lead SSOP package uses a 0.65 mm lead pitch and is designed for surface-mount assembly, allowing the converter to be placed on conventional high-density analog and mixed-signal circuit boards.

AD977AARS is identified as a one-input ADC with one SAR conversion core, although the product listings also characterize the associated family as a multichannel converter. Designers should use the pin-description table and analog input configuration in the manufacturer datasheet when assigning channels, references, and digital control signals. The product-page summary distinguishes AD977A from the base AD977 through throughput rate: the AD977A reaches 200 kSPS, while the base AD977 reaches 100 kSPS.

Typical uses include process-control and factory data acquisition, communications receivers, measurement instruments, digital diagnostics, and embedded systems that require accurate serial conversion. The 5 V supply and serial output make the device suitable for designs where a dedicated parallel ADC bus would increase routing complexity. In signal-chain layouts, input and reference grounding remain as important as converter selection because they determine the repeatability of the sampled code.

PCB implementation should follow the pin assignments and layout guidance in the manufacturer datasheet. Keep analog input and reference traces short, maintain a continuous ground reference, and place required bypass capacitance close to the supply pins. Because the converter uses a single 5 V rail, supply decoupling and clock or serial-interface timing should be checked together during signal-integrity and power-integrity reviews.

This product page combines the manufacturer family specifications with practical selection guidance, verified package characteristics, sourcing instructions, and clearly qualified drop-in alternatives. It distinguishes electrically equivalent grade or lead-free ordering options from speculative cross-package substitutes so engineers can assess replacement risk without redesigning an existing 28-pin SSOP footprint.

Mga alternatibo na pwedeng ilagay na AD977AARS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AD977AARS (parehas na form factor at footprint) — pagkakaiba sa Package, Supply Voltage, Conversion Architecture, Power-Down Mode, Throughput Rate.

Analog Devices
Package: 28-pin SSOP (RS-28)
Supply Voltage: 5 V single supply
Power-Down Mode: 50 µW
Ikabit sa AD977AARS →
Analog Devices
Conversion Architecture: SAR with switched-capacitor internal DAC
Power-Down Mode: Supported
Throughput Rate: 100 kSPS
Ikabit sa AD977AARS →

AD977ABRS

✅ Drop-In
Analog Devices
📦 28-pin SSOP
16 bit · 200 kSPS · 100 kSPS · 1 · SAR (Successive Approximation Register) · 5 V single supply · 100 mW max · 50 µW

Magkontak para sa presyo

Tingnan ang Datasheet →

AD977AARSZ

✅ Drop-In
📦 28-pin SSOP
Same 16-bit, 200 kSPS electrical configuration and 28-pin SSOP footprint; the Z ordering suffix adds the lead-free designation, with 0% stated difference in resolution and throughput rate.

📋 Alternatibo na Reference (hindi sa katalogo)

AD977AARS Mga Pinakamataas na Rating at Electrical Characteristics

Converter Type 16-bit successive-approximation ADC
Pangangasiwaan 16 bit
Throughput Rate 200 kSPS
Volte ng Pagbibigay 5 V
Supply Type Single supply
Input Count 1 input
Conversion Architecture Successive approximation
Digital Interface Serial I/O
Channel Count 3 channels
Packhaging 28-pin SSOP
Package Type PDSO28
Lead Pitch 0.65 mm
Package Width 5.30 mm
Uri ng Pagpapasok Surface mount
Process Technology BiCMOS

Gabay sa Pin Configuration ng AD977AARS 5.30 mm

Pin configuration para sa AD977AARS (5.30 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 5.30 mm package para sa AD977AARS

Wala ng detalyadong pinout data na magagamit para sa AD977AARS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD977AARS ay nararapat para sa 6 aplikasyons: Industrial Process Measurement, Communications Receiver, Precision Data-Acquisition System, Test and Measurement Instrument, Embedded Control System, Digital Diagnostics.

🏭

Industrial Process Measurement

The AD977AARS fits industrial process-measurement loops that require 16-bit resolution, a 200 kSPS sampling rate, and serial data transfer. Place the converter at the output of a conditioned sensor or instrumentation amplifier, then connect its serial interface to a microcontroller or industrial controller. The single 5 V supply simplifies analog-system power planning, while the SSOP package preserves board area. Because each conversion requires settling of the external front end, the input filter and acquisition cycle must be designed together rather than treating the 200 kSPS figure as an unlimited system sampling rate.

🌐

Communications Receiver

AD977AARS is suitable for communications receivers in which analog waveform data must be converted into a compact digital stream. Its 16-bit nominal resolution provides 65,536 nominal code levels, and the 200 kSPS throughput provides substantially faster conversion than the 100 kSPS base AD977. Use the serial output to reduce interface width on compact receiver boards. The 5 V supply and 28-pin SSOP outline support space-constrained implementations, provided that routing from the RF or baseband front end to the converter preserves signal integrity and common-mode limits remain within the family specifications.

📈

Precision Data-Acquisition System

The AD977AARS can serve as the sampling element of a precision data-acquisition system requiring 16-bit data and a 200 kSPS conversion rate. Its serial interface leaves more PCB area available for input conditioning, isolation, and digital processing than a parallel ADC of comparable resolution. The single 5 V operating supply simplifies analog rail integration. For best results, match the converter's input range to the conditioned analog signal, use a low-noise reference, and schedule conversion start and data acquisition so the front end has sufficient acquisition time at each 200 kSPS operating point.

🔧

Test and Measurement Instrument

AD977AARS is appropriate for compact measurement instruments that digitize slowly changing or repetitive analog signals and require more resolution than a low-speed sensor ADC. A 16-bit SAR converter provides a direct digital representation for calibration, waveform inspection, or automated test. The 200 kSPS rate allows acquisition of faster events than the 100 kSPS base AD977 while retaining a straightforward serial interface. The main design consideration is signal conditioning: keep source impedance balanced, provide suitable reference decoupling, and verify that the analog input remains inside the converter's specified range under worst-case conditions.

🧩

Embedded Control System

The AD977AARS works well as an ADC front end for an embedded controller monitoring analog plant variables. It converts an analog input at up to 200 kSPS and transfers the result through its serial interface to a microcontroller or digital signal controller. The 16-bit code width supports fine-grained measurements, while the 28-pin SSOP package reduces routing demand compared with a parallel conversion interface. In a control loop, conversion latency, filtering, and the timing of control updates should be evaluated together. The external analog front end must present a valid settled signal at the conversion instant.

💊

Digital Diagnostics

AD977AARS can digitize diagnostic waveforms in medical, laboratory, and equipment-monitoring systems where 16-bit resolution and deterministic successive-approximation conversion are useful. The 200 kSPS throughput allows repetitive pulse or waveform sampling, and the serial interface supports connection to a digital processor with fewer traces than a parallel ADC. The 5 V supply is straightforward to integrate, but safety-critical use requires additional review of the exact device grade, isolation architecture, reference integrity, and applicable medical or sector-specific requirements. The converter should not be treated as a complete diagnostic front end without suitable sensing, conditioning, and protection.

What is the AD977AARS?
The AD977AARS is a 16-bit, 200 kSPS successive-approximation ADC from Analog Devices with serial I/O, a single 5 V supply, and a 28-pin SSOP package. According to the Analog Devices AD977 product page, the AD977A reaches 200 kSPS while the base AD977 reaches 100 kSPS. The AD977AARS ordering code identifies the 28-lead SSOP configuration.
What is the sampling rate of AD977AARS?
The AD977AARS has a throughput rate of 200 kSPS. This rate is twice the 100 kSPS specified for the base AD977, according to the Analog Devices AD977 product-page summary. The higher throughput supports faster acquisition in industrial control, communications, instrumentation, and embedded measurement systems while retaining 16-bit resolution.
What resolution does AD977AARS provide?
The AD977AARS provides 16-bit resolution. The manufacturer identifies both AD977 and AD977A as high-speed, low-power 16-bit analog-to-digital converters. Its SAR conversion core and serial output provide a compact interface for digital systems that require more precision than a typical low-resolution sensor ADC without requiring a wide parallel data bus.
What supply voltage does AD977AARS require?
The AD977AARS operates from a single 5 V supply. According to the Analog Devices AD977 family description, both the AD977 and AD977A use one 5 V rail. This simplifies supply planning, although a clean 5 V source and correctly placed bypass capacitors remain important for preserving converter performance in analog measurement systems.
Where can I download the AD977AARS datasheet PDF?
The official AD977AARS documentation starts with the Analog Devices AD977 product page at analog.com/en/products/ad977.html. Open the product page and select its data-sheet link to obtain the manufacturer PDF. The AD977 family datasheet contains the authoritative package drawing, pin descriptions, electrical characteristics, and application guidance; distributor-hosted PDF copies should be used only as secondary references.
Where can I find the AD977AARS pinout?
The AD977AARS pinout is identified in the pin-description table and package drawing in the Analog Devices AD977 family datasheet. The device uses a 28-lead SSOP package with a 0.65 mm lead pitch. Use the manufacturer pin table when assigning VIN, reference, ground, serial-interface, control, and supply connections rather than relying on package position alone.
Is AD977AARS suitable for industrial data acquisition?
Yes, AD977AARS is suitable for compact industrial data-acquisition systems that require 16-bit resolution and a 200 kSPS sampling rate. Its single 5 V analog supply and serial interface simplify mixed-signal board routing, while the SSOP package supports high-density surface-mount assembly. Validate the exact operating-temperature grade and analog input limits against the family datasheet before deployment.
What can replace AD977AARS?
The closest supported replacements are the AD977ABRS and AD977AARSZ ordering variants because they retain the 16-bit AD977A-family architecture and 28-pin SSOP footprint. AD977ABRS changes the device grade, while AD977AARSZ adds the lead-free ordering designation. Confirm grade, temperature range, pin functions, and acquisition timing in the manufacturer documentation before treating either option as a production substitute.
Is AD977AARS the same as AD977ABRS?
AD977AARS and AD977ABRS are closely related 28-pin SSOP versions of the 16-bit AD977A converter, but their ordering suffixes identify different device grades. The electrical functions and conversion performance must be compared in the manufacturer ordering table, including operating-temperature limits and qualification status. They may share a footprint while not being interchangeable for every environmental requirement.
When should I choose AD977AARS over AD977AARSZ?
Choose AD977AARS when its specified grade matches the product's environmental and sourcing requirements, and choose AD977AARSZ when the lead-free ordering designation is required for assembly or regulatory documentation. Both retain the 16-bit, 200 kSPS AD977A configuration and 28-pin SSOP package. Compare the exact suffix definitions, temperature grades, and assembly requirements before finalizing the BOM.
AD977AARS vs AD977ABRS - which is better for industrial control?
AD977AARS and AD977ABRS should be selected according to temperature grade and qualification requirements rather than conversion speed alone. Both are identified as 28-pin SSOP members of the 16-bit AD977A family, whose maximum throughput is 200 kSPS. For industrial control, verify the required environmental range and select the grade that meets it without requiring a PCB change.
How do I design the layout around AD977AARS?
Place the required supply bypass capacitors close to the 5 V and ground pins, and keep the analog input and reference routes short and away from high-current switching nodes. Maintain a continuous ground plane, use the pin assignments from the manufacturer datasheet, and account for the converter's serial clock and data timing. The 28-lead SSOP footprint has a 0.65 mm lead pitch and requires careful assembly clearance.
Does AD977AARS need a heatsink?
The AD977AARS is described as a low-power converter operated from a single 5 V supply, but a definitive heatsink decision requires the datasheet power specification and the calculated dissipation at the actual sampling rate and load. Use the manufacturer maximum-power rating and your worst-case supply, sample-rate, and ambient conditions. A compact SSOP layout may still require careful copper use if dissipation is high.
Where can I buy AD977AARS and check current stock?
Use the Request a Quote form on this page to request current AD977AARS stock, minimum order quantity, and lead time for your required quantity and packaging. This page does not maintain a live stock counter, so the manufacturer or authorized supply channel should confirm current availability. Requesting a quotation also allows packaging and shipment requirements to be checked together.
What is the price of AD977AARS?
Current AD977AARS pricing is obtained through the Request a Quote form on this page. The structured commercial offer updates separately from technical content because component pricing, availability, and quantity breaks can change. Submit the required quantity, package preference, and delivery location to receive a current quotation rather than relying on a stale historical unit-price figure.
How long is the lead time for AD977AARS?
AD977AARS lead time and minimum order quantity should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, package configuration, production scheduling, and current component availability. Include the required quantity and target delivery date in the request so the supply channel can provide an actionable schedule.
What are the key specifications engineers should know about AD977AARS?
The key AD977AARS specifications are 16-bit resolution, a 200 kSPS throughput rate, a single 5 V supply, successive-approximation conversion, and serial I/O in a 28-pin SSOP package with 0.65 mm lead pitch. According to the Analog Devices AD977 family description, the AD977A is the 200 kSPS member, while the base AD977 operates at 100 kSPS.

Impormasyon ng Talumpati sa Engineering for AD977AARS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AD977AARS when the design requires a 16-bit SAR ADC with a 200 kSPS throughput rate, a single 5 V supply, and a 28-pin SSOP footprint. It is especially useful for compact industrial, communications, instrumentation, and embedded acquisition systems where a serial interface simplifies board routing. Select AD977ABRS when its documented grade better matches the environmental requirements while retaining the same package and core conversion characteristics. Select AD977AARSZ when the lead-free ordering designation is required for assembly or regulatory documentation. Do not select the base AD977 as an equivalent when the full 200 kSPS rate is required, because its listed throughput is 100 kSPS. For every option, verify the manufacturer ordering table, temperature range, reference requirements, pin behavior, and acquisition timing before approving a substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AD977ABRS AD977AARSZ
Brand Analog Devices Analog Devices Analog Devices
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Converter Type 16-bit successive-approximation ADC 16-bit AD977A-family ADC 16-bit successive-approximation ADC
Resolution 16 bit 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS family rate 200 kSPS
Supply Voltage 5 V single supply 5 V single supply 5 V single supply
Digital Interface Serial I/O Serial I/O Serial I/O
Process Technology BiCMOS BiCMOS family construction BiCMOS
Ordering-Suffix Difference AARS grade and 28-lead SSOP designation ABRS grade designation; 0 kSPS stated throughput difference Adds Z lead-free designation; 0% stated difference in resolution and throughput rate

Pangunahing mga Pagkakaiba

  • Higher conversion throughput within the AD977 family (kumpara saBase AD977)
  • Single-supply integration simplifies analog power planning (kumpara saDual-supply ADC designs)
  • Compact serial-interface implementation (kumpara sa16-bit parallel-interface ADC designs)

Talaan ng Disenyo

Use the AD977A family pin table and package drawing to assign the 28 leads. Place the required 5 V bypass capacitors close to the supply and ground pins, keep analog input and reference traces short, and maintain a continuous ground plane beneath the converter where the package and board stackup permit. The SSOP has a 0.65 mm lead pitch, so assembly clearance and solder-joint inspection deserve attention on high-density boards.

Treat the analog input, voltage reference, and serial clock as related high-impedance or timing-sensitive nodes. Keep the input source impedance and acquisition network compatible with the 16-bit SAR conversion process, and route serial clock and data away from sensitive analog traces. Confirm that the external front end has settled before each conversion start, particularly when operating near the 200 kSPS maximum throughput.

Do not confuse the AD977A with the base AD977 solely because both use the same family name: the AD977A supports 200 kSPS, while the base AD977 is listed at 100 kSPS. Also verify the grade and temperature requirements when moving from AD977AARS to AD977ABRS or AD977AARSZ. A shared 28-pin SSOP footprint does not by itself establish equivalence for every environmental requirement.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The standard AD977AARS suffix and the separate AD977AARSZ lead-free ordering option are listed, but explicit compliance declarations are not included in the product summaries.

Kaugnay na Hanapin

AD977AARS datasheet AD977AARS specifications AD977AARS pinout AD977AARS datasheet pdf AD977AARS 28 SSOP Analog Devices AD977AARS AD977AARS 16 bit 200 kSPS AD977AARS equivalent AD977AARS replacement AD977AARS vs AD977ABRS AD977AARS application circuit AD977AARS price

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD977AARS AD977ABRS AD977AARSZ AD977 ADC analog-to-digital converter successive-approximation converter SAR serial I/O 16-bit resolution 200 kSPS throughput 5 V single supply BiCMOS 28-pin SSOP PDSO28 surface mount industrial process measurement communications receiver data acquisition embedded control analog input voltage reference dropout voltage
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ