AD977ACRS - 16-Bit 200 kSPS SAR ADC | Analog Devices
MPN: AD977ACRS ✓ NakahandaAD977ACRS Ulas
An ADC converts an analog input voltage into a corresponding digital code for processing, storage, transmission, or control. The AD977A belongs to the successive-approximation ADC family, which compares the input against a series of internal trial values and progressively resolves the conversion result. Compared with flash and pipeline architectures, this SAR approach is well suited to instrumentation, industrial control, sensor acquisition, and data acquisition systems where a precise conversion result and serial output are more important than extremely high sampling rates.
The principal features of the AD977A include 16-bit resolution, one analog input, a 200 kSPS throughput rate, and operation from one 5 V supply. Its serial output reduces the number of signal interconnections required between the converter and a digital controller. The AD977ACRS package also carries the S ordering suffix associated with the 28-pin SSOP format and the R suffix associated with reel presentation.
The AD977A architecture is designed for low-power, single-supply operation. Because the converter uses a 5 V supply, its digital interface and analog input circuitry must remain within the device's specified input and supply limits. A stable reference and careful grounding are central to achieving repeatable conversion performance. The manufacturer datasheet should be used as the controlling document for reference requirements, input voltage limits, acquisition timing, digital timing, and decoupling recommendations.
Typical uses include precision industrial measurement, process-control loops, laboratory instrumentation, portable sensor interfaces, communications equipment, and embedded data-acquisition systems. At 200 kSPS, it is appropriate for signals whose useful bandwidth is comfortably below the converter's sampling capability, allowing designers to use basic analog anti-alias filtering before the sampled input reaches the ADC.
A practical design should preserve a quiet reference net, use short analog traces, provide local supply bypassing, and keep digital clock and data lines away from the analog input. The input network should also limit ringing and establish the source impedance expected by the SAR sampling network. For systems requiring more than one channel, synchronization and settling time must be evaluated before selecting the AD977ACRS.
This product page combines the Analog Devices family specifications with package, interface, operating-range, and sourcing details, then adds replacement, comparison, and design guidance. It is intended to help engineers evaluate the AD977ACRS for 16-bit, 200 kSPS single-supply acquisition before implementing the manufacturer's reference and layout recommendations.
Mga alternatibo na pwedeng ilagay na AD977ACRS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok AD977ACRS (parehas na form factor at footprint) — pagkakaiba sa ADC Architecture, Package.
AD977ABRS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →AD977ACRS Mga Pinakamataas na Rating at Electrical Characteristics
| Pangangasiwaan | 16 bit |
| Conversion Type | Successive approximation |
| Throughput Rate | 200 kSPS |
| Analog Input Count | 1 input |
| Supply Type | Single supply |
| Nominal Supply Voltage | 5 V |
| Supply Voltage na Operasyon | 4.75 V to 5.25 V |
| Output Interface | Serial |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 28-pin SSOP |
| Package Lead Pitch | 0.65 mm |
| Package Width | 5.30 mm |
| Uri ng Pagpapasok | Surface mount |
| Tindminan RoHS | Compliant |
| ADC Architecture | SAR ADC |
Gabay sa Pin Configuration ng AD977ACRS 5.30 mm
Pin configuration para sa AD977ACRS (5.30 mm package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.
Wala ng detalyadong pinout data na magagamit para sa AD977ACRS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
AD977ACRS ay nararapat para sa 6 aplikasyons: Industrial Sensor Acquisition, Precision Data Acquisition, Process Control Monitoring, Laboratory Instrumentation, Communication Signal Monitoring, Portable Embedded Measurement.
Industrial Sensor Acquisition
The AD977ACRS is well suited to acquiring conditioned sensor signals in industrial measurement systems because it combines 16-bit resolution with a 200 kSPS sampling rate. It can digitize temperature, pressure, position, and level signals after the sensor output has been scaled into the ADC's permitted input range. Use an anti-alias filter and a suitable reference network, then verify settling time against the source impedance. The single 5 V supply simplifies many embedded analog front ends, while the serial interface keeps the digital connection compact. Temperature performance and reference stability should be checked against the required measurement accuracy.
Inirekomenda
Precision Data Acquisition
The AD977ACRS can serve as the front end of a precision data-acquisition instrument when the signal bandwidth does not require a faster converter. Its 16-bit resolution provides a fine numerical scale, while the 200 kSPS rate supports sampling of many slow or medium-bandwidth waveforms. The analog front end should provide low-noise amplification, suitable differential or single-ended conversion, and input filtering before the SAR sampling network. A low-noise reference and local bypass capacitors are equally important because reference variation and supply ripple can affect the resulting digital code.
Inirekomenda
Process Control Monitoring
The AD977ACRS is appropriate for process-control loops that monitor relatively slow variables such as pressure, flow, temperature, or valve position. Its 200 kSPS conversion capability provides temporal margin for filtering and digital averaging, while 16-bit resolution preserves fine measurement detail. Place the converter behind a protected analog input network and establish settling time for the sensor and conditioning circuitry. For applications requiring multiple channels, evaluate whether separate converters are preferable to multiplexing one ADC, since input switching, charge injection, and acquisition time can introduce channel-dependent errors.
Inirekomenda
Laboratory Instrumentation
The AD977ACRS can be used in laboratory instruments that digitize controlled analog signals and transfer the results to a controller or host processor. Its 16-bit resolution supports precision measurement, and the serial interface reduces the number of PCB traces required in compact instruments. The reference should be isolated from noisy digital activity, while analog and ground routing should be kept separate from clock and data paths. For gain stages or drivers, evaluate input settling with the converter's acquisition network rather than assuming that bandwidth alone guarantees accurate results during each 200 kSPS conversion.
Inirekomenda
Communication Signal Monitoring
The AD977ACRS can monitor low-bandwidth communication or instrumentation signals when the system does not require RF-rate conversion. Its 200 kSPS sampling rate is suitable for supervisory, baseband, or slowly varying envelope measurements rather than wideband waveform capture. The analog input should be conditioned to remove unwanted high-frequency content before the converter samples it. Use the manufacturer timing information to determine conversion latency and acquisition requirements, then account for that latency in the communication or control loop. Reference noise and digital-interface coupling remain important at the system's expected signal resolution.
Inirekomenda
Portable Embedded Measurement
The AD977ACRS fits compact embedded measurement equipment that converts a limited number of analog channels for later processing by a microcontroller or DSP. Its single analog input keeps the converter straightforward to route, while the 28-pin SSOP supports reasonably dense PCB placement. Low-power single-supply operation is useful in portable systems, although the complete power budget must include the sensor, analog conditioning, reference, and digital interface. Decouple the supply locally, keep the reference return path controlled, and confirm that the selected operating temperature grade satisfies the enclosure's environmental requirements.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for AD977ACRS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | AD977ABRS |
|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP |
| Brand | Analog Devices | Analog Devices |
| Resolution | 16 bit | 16 bit |
| Throughput Rate | 200 kSPS | 200 kSPS |
| ADC Architecture | Successive approximation | Successive approximation |
| Analog Input Count | 1 input | 1 input |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Output Interface | Serial | Serial |
Pangunahing mga Pagkakaiba
- Exact 200 kSPS AD977A ordering configuration (kumpara saAD977ABRS)
- 28-pin SSOP footprint distinction (kumpara saAD977ACR)
- Single-supply precision conversion (kumpara saAD977ACR)
Talaan ng Disenyo
Separate analog and digital return paths and place the supply bypass capacitors close to the AD977ACRS power and ground pins. Keep the serial clock and data traces away from the analog input and reference nodes. Use a continuous ground reference beneath the analog section where the board stackup permits, and provide only the minimum return path needed by the digital interface to prevent switching current from crossing sensitive analog nodes.
Establish the maximum source impedance and acquisition time before finalizing the analog input network. Include the sensor or driver output impedance, resistor noise, capacitance, and the converter's sampling behavior in the settling calculation. Add an anti-alias filter with its own attenuation and phase response, and verify that transient recovery after an input step is acceptable for the 200 kSPS conversion rate.
Design a 5 V source that remains within 4.75 V to 5.25 V under transient loading. Place local high-frequency bypass capacitance at the device and route reference and supply connections as controlled impedances rather than long loops. Confirm startup, shutdown, and reference settling behavior in the intended power sequence, especially when the ADC is sampled immediately after a system reset or supply enable.
Do not substitute AD977ACR for AD977ACRS because their packages and pin counts differ: the AD977ACR is listed in 20-pin SOIC, while the AD977ACRS uses a 28-pin SSOP. Likewise, confirm timing and pin functions before accepting AD977ABRS. The shared 16-bit resolution and 200 kSPS family rating do not by themselves prove that every acquisition, reference, and digital-control detail is interchangeable.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is identified in the component listing. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status was confirmed.