Analog Devices

AD977ACRS - 16-Bit 200 kSPS SAR ADC | Analog Devices

N.º da peça: AD977ACRS ✓ Ativo
Single supply Vdss 28-pin SSOP Package
MOQ: 1 |

AD977ACRS Visão geral

The Analog Devices AD977ACRS is a 16-bit, 200 kSPS successive-approximation analog-to-digital converter operating from a single 5 V supply, housed in a 28-pin SSOP package. It combines 16-bit resolution with a 200 kSPS sampling rate for applications requiring accurate digitization of low-frequency analog signals. The converter uses a serial interface, operates from 4.75 V to 5.25 V, and is specified over the -40°C to +85°C industrial temperature range.

An ADC converts an analog input voltage into a corresponding digital code for processing, storage, transmission, or control. The AD977A belongs to the successive-approximation ADC family, which compares the input against a series of internal trial values and progressively resolves the conversion result. Compared with flash and pipeline architectures, this SAR approach is well suited to instrumentation, industrial control, sensor acquisition, and data acquisition systems where a precise conversion result and serial output are more important than extremely high sampling rates.

The principal features of the AD977A include 16-bit resolution, one analog input, a 200 kSPS throughput rate, and operation from one 5 V supply. Its serial output reduces the number of signal interconnections required between the converter and a digital controller. The AD977ACRS package also carries the S ordering suffix associated with the 28-pin SSOP format and the R suffix associated with reel presentation.

The AD977A architecture is designed for low-power, single-supply operation. Because the converter uses a 5 V supply, its digital interface and analog input circuitry must remain within the device's specified input and supply limits. A stable reference and careful grounding are central to achieving repeatable conversion performance. The manufacturer datasheet should be used as the controlling document for reference requirements, input voltage limits, acquisition timing, digital timing, and decoupling recommendations.

Typical uses include precision industrial measurement, process-control loops, laboratory instrumentation, portable sensor interfaces, communications equipment, and embedded data-acquisition systems. At 200 kSPS, it is appropriate for signals whose useful bandwidth is comfortably below the converter's sampling capability, allowing designers to use basic analog anti-alias filtering before the sampled input reaches the ADC.

A practical design should preserve a quiet reference net, use short analog traces, provide local supply bypassing, and keep digital clock and data lines away from the analog input. The input network should also limit ringing and establish the source impedance expected by the SAR sampling network. For systems requiring more than one channel, synchronization and settling time must be evaluated before selecting the AD977ACRS.

This product page combines the Analog Devices family specifications with package, interface, operating-range, and sourcing details, then adds replacement, comparison, and design guidance. It is intended to help engineers evaluate the AD977ACRS for 16-bit, 200 kSPS single-supply acquisition before implementing the manufacturer's reference and layout recommendations.

Alternativas drop-in para AD977ACRS — mesmo encapsulamento, compatível pino a pino. Peças de encapsulamento diferente que exigem retrabalho na PCB são excluídas.

Variantes desta série

Modelos da mesma série compatíveis como drop-in com AD977ACRS (mesmo formato e footprint) — diferindo em ADC Architecture, Package.

Analog Devices
ADC Architecture: SAR (Successive Approximation Register)
Package: 28-pin SSOP (RS-28)
Comparar com AD977ACRS →

AD977ABRS

✅ Drop-In
Analog Devices
📦 28-pin SSOP
16 bit · 200 kSPS · 100 kSPS · 1 · SAR (Successive Approximation Register) · 5 V single supply · 100 mW max · 50 µW

Consulte o preço

Ver ficha técnica →

AD977ACRS Classificações máximas e características elétricas

Resolução 16 bit
Conversion Type Successive approximation
Throughput Rate 200 kSPS
Analog Input Count 1 input
Supply Type Single supply
Nominal Supply Voltage 5 V
Tensão de alimentação de operação 4.75 V to 5.25 V
Output Interface Serial
Faixa de temperatura de operação -40°C to +85°C
Encapsulamento 28-pin SSOP
Package Lead Pitch 0.65 mm
Package Width 5.30 mm
Tipo de montagem Surface mount
Status RoHS Compliant
ADC Architecture SAR ADC

Guia de Configuração de Pinos do AD977ACRS 5.30 mm

Configuração de pinos para AD977ACRS (pacote 5.30 mm). Este componente analógico possui pinos de entrada, saída e alimentação. Consulte o datasheet do fabricante para configurações de offset null, compensação e pino de enable. Ideal para circuitos de condicionamento de sinal e amplificadores.

Diagrama de pinagem do pacote 5.30 mm para AD977ACRS

Nenhum dado detalhado de pinagem disponível para AD977ACRS.

Consulte a ficha técnica para a configuração completa dos pinos.

Aplicações típicas

AD977ACRS é adequado para 6 aplicaçãos: Industrial Sensor Acquisition, Precision Data Acquisition, Process Control Monitoring, Laboratory Instrumentation, Communication Signal Monitoring, Portable Embedded Measurement.

🏭

Industrial Sensor Acquisition

The AD977ACRS is well suited to acquiring conditioned sensor signals in industrial measurement systems because it combines 16-bit resolution with a 200 kSPS sampling rate. It can digitize temperature, pressure, position, and level signals after the sensor output has been scaled into the ADC's permitted input range. Use an anti-alias filter and a suitable reference network, then verify settling time against the source impedance. The single 5 V supply simplifies many embedded analog front ends, while the serial interface keeps the digital connection compact. Temperature performance and reference stability should be checked against the required measurement accuracy.

📈

Precision Data Acquisition

The AD977ACRS can serve as the front end of a precision data-acquisition instrument when the signal bandwidth does not require a faster converter. Its 16-bit resolution provides a fine numerical scale, while the 200 kSPS rate supports sampling of many slow or medium-bandwidth waveforms. The analog front end should provide low-noise amplification, suitable differential or single-ended conversion, and input filtering before the SAR sampling network. A low-noise reference and local bypass capacitors are equally important because reference variation and supply ripple can affect the resulting digital code.

🌐

Process Control Monitoring

The AD977ACRS is appropriate for process-control loops that monitor relatively slow variables such as pressure, flow, temperature, or valve position. Its 200 kSPS conversion capability provides temporal margin for filtering and digital averaging, while 16-bit resolution preserves fine measurement detail. Place the converter behind a protected analog input network and establish settling time for the sensor and conditioning circuitry. For applications requiring multiple channels, evaluate whether separate converters are preferable to multiplexing one ADC, since input switching, charge injection, and acquisition time can introduce channel-dependent errors.

🔧

Laboratory Instrumentation

The AD977ACRS can be used in laboratory instruments that digitize controlled analog signals and transfer the results to a controller or host processor. Its 16-bit resolution supports precision measurement, and the serial interface reduces the number of PCB traces required in compact instruments. The reference should be isolated from noisy digital activity, while analog and ground routing should be kept separate from clock and data paths. For gain stages or drivers, evaluate input settling with the converter's acquisition network rather than assuming that bandwidth alone guarantees accurate results during each 200 kSPS conversion.

📡

Communication Signal Monitoring

The AD977ACRS can monitor low-bandwidth communication or instrumentation signals when the system does not require RF-rate conversion. Its 200 kSPS sampling rate is suitable for supervisory, baseband, or slowly varying envelope measurements rather than wideband waveform capture. The analog input should be conditioned to remove unwanted high-frequency content before the converter samples it. Use the manufacturer timing information to determine conversion latency and acquisition requirements, then account for that latency in the communication or control loop. Reference noise and digital-interface coupling remain important at the system's expected signal resolution.

📱

Portable Embedded Measurement

The AD977ACRS fits compact embedded measurement equipment that converts a limited number of analog channels for later processing by a microcontroller or DSP. Its single analog input keeps the converter straightforward to route, while the 28-pin SSOP supports reasonably dense PCB placement. Low-power single-supply operation is useful in portable systems, although the complete power budget must include the sensor, analog conditioning, reference, and digital interface. Decouple the supply locally, keep the reference return path controlled, and confirm that the selected operating temperature grade satisfies the enclosure's environmental requirements.

What is the AD977ACRS?
The AD977ACRS is a 16-bit, 200 kSPS single-input successive-approximation ADC from Analog Devices. According to the Analog Devices AD977 product page, it operates from a single 5 V supply and is packaged in a 28-pin SSOP. It is intended for precision acquisition systems that require 16-bit resolution without a very high conversion rate.
What is the conversion rate of the AD977ACRS?
The AD977ACRS converts at 200 kSPS. The Analog Devices AD977 family page identifies the AD977A grade as the 200 kSPS version, while the original AD977 grade operates at 100 kSPS. This distinction is important when checking timing requirements because conversion and acquisition timing determine the usable input bandwidth.
What is the supply voltage range of AD977ACRS?
The AD977ACRS operates from 4.75 V to 5.25 V. The Analog Devices product listing identifies single 5 V operation, and the component documentation gives the allowed supply interval. Designers should provide a source capable of maintaining the required voltage across temperature and load rather than relying on a nominal 5 V rail alone.
What is the difference between AD977 and AD977A?
The primary documented difference is throughput rate: the original AD977 converts at 100 kSPS, while the AD977A converts at 200 kSPS. Both are described by Analog Devices as low-power, 16-bit SAR converters using a single 5 V supply. Verify package, pinout, timing, and acquisition requirements before treating one grade as a replacement for the other.
Where can I download the AD977ACRS datasheet PDF?
The official AD977 documentation is available from the Analog Devices product page at https://www.analog.com/en/products/ad977.html. That page provides the manufacturer datasheet and technical documentation for the AD977 and AD977A family. Use the pin-description table, timing diagrams, reference requirements, and recommended application circuit when laying out the PCB.
Where is the AD977ACRS pinout?
The AD977ACRS pinout is defined in the Analog Devices AD977 datasheet and uses a 28-pin SSOP package. Use the manufacturer pin-description table when assigning analog inputs, reference connections, digital data, clock, control, power, and ground nets. A complete pin map should be taken directly from that table because package-level drawings alone do not establish function.
Is the AD977ACRS suitable for sensor measurement?
The AD977ACRS is suitable for many low-bandwidth sensor-measurement systems because it provides 16-bit resolution and a 200 kSPS sampling rate. Its suitability depends on the sensor output range, source impedance, required acquisition time, reference stability, and noise performance. Add suitable filtering and conditioning before the ADC whenever the sensor signal is not already compatible with its input limits.
Can AD977ABRS replace AD977ACRS?
The AD977ABRS is the closest documented same-family candidate because Analog Devices identifies the AD977A grade at 200 kSPS and the AD977ABRS is offered in a 28-pin SSOP. Compatibility still requires checking every pin, timing parameter, reference arrangement, and package dimension against the AD977ACRS datasheet. Do not substitute it solely from the shared resolution and sampling rate.
What can replace the AD977ACRS as a drop-in part?
No fully verified cross-brand drop-in replacement was identified for the AD977ACRS. The AD977ABRS is a same-manufacturer, same-package family candidate, but it should be accepted only after a complete pin and timing comparison. If its timing or reference configuration differs, a replacement will require board or firmware changes rather than a simple component substitution.
When should I choose the AD977ACRS instead of the AD977ABRS?
Choose the AD977ACRS when procurement must remain on the exact AD977A ordering configuration associated with the original design. Choose the AD977ABRS only when its manufacturer documentation confirms identical electrical behavior, pin functions, timing, and package fit. Both are associated with the 16-bit AD977A family, so no functional advantage should be inferred from the suffix alone.
Is AD977ACRS the same as AD977ACR?
No. The AD977ACRS is listed in a 28-pin SSOP package, while the AD977ACR is listed in a 20-pin SOIC package. The different package and pin count mean they are not drop-in replacements for one another. Choose based on the PCB footprint and complete pinout rather than treating the two ordering codes as interchangeable.
What is the best Analog Devices equivalent for AD977ACRS?
The AD977ABRS is the closest Analog Devices family candidate for the AD977ACRS because both represent AD977A 16-bit, 200 kSPS converters and the candidate is listed in a 28-pin SSOP. Confirm pin-to-pin compatibility, acquisition timing, reference behavior, and temperature specifications in the manufacturer documentation before approving it as a drop-in replacement.
Where can I buy AD977ACRS online?
Use the Request a Quote form on this page to request AD977ACRS availability, pricing, and lead time. The form allows the exact AD977ACRS ordering code and required quantity to be reviewed without relying on a generic search result. Packaging, reel quantity, and delivery timing should be confirmed with the quotation.
What is the price of AD977ACRS?
Current AD977ACRS pricing should be requested through the Request a Quote form on this page. The form permits quantity and reel packaging requirements to be included in the request, which is important for a 28-pin SSOP component. Stock status and lead time should also be confirmed for the exact AD977ACRS suffix rather than for the broader AD977 family.
What is the lead time and stock status for AD977ACRS?
Request the current AD977ACRS lead time, minimum order quantity, and stock status through the Request a Quote form on this page. The exact suffix and required reel quantity should be included because AD977 family ordering codes can differ in package and packing configuration. Procurement should not infer availability from another AD977 grade or package.
What are the key specifications engineers should know about AD977ACRS?
The key AD977ACRS specifications are 16-bit resolution, 200 kSPS throughput, one analog input, SAR conversion, and a single 4.75 V to 5.25 V supply. The device uses a serial output and is listed in a 28-pin SSOP for the -40°C to +85°C range. The Analog Devices AD977 family documentation is the controlling source for timing and reference details.

Dados de referência de engenharia para AD977ACRS — comparação, orientação de projeto e informações de conformidade.

Guia de seleção

Choose the AD977ACRS when the design requires the exact 16-bit, 200 kSPS AD977A converter in a 28-pin SSOP and its ordering configuration is already validated. The AD977ABRS is a same-manufacturer, same-package family candidate that may simplify replacement, but it should be approved only after checking pin functions, acquisition timing, reference behavior, and electrical limits. Do not select the AD977ACR as a direct substitute because its 20-pin SOIC package requires a different PCB footprint. For new multi-channel designs, evaluate whether one converter per channel or a multiplexed front end produces better settling and channel-isolation results. In every case, validate the reference, input acquisition network, anti-alias filter, and digital timing in the target system rather than relying only on nominal resolution and sampling rate.

Comparação com alternativas

Parâmetro Este produto AD977ABRS
Package 28-pin SSOP 28-pin SSOP
Brand Analog Devices Analog Devices
Resolution 16 bit 16 bit
Throughput Rate 200 kSPS 200 kSPS
ADC Architecture Successive approximation Successive approximation
Analog Input Count 1 input 1 input
Supply Voltage Range 4.75 V to 5.25 V 4.75 V to 5.25 V
Output Interface Serial Serial

Principais diferenciais

  • Exact 200 kSPS AD977A ordering configuration (vs AD977ABRS)
  • 28-pin SSOP footprint distinction (vs AD977ACR)
  • Single-supply precision conversion (vs AD977ACR)

Notas de projeto

Separate analog and digital return paths and place the supply bypass capacitors close to the AD977ACRS power and ground pins. Keep the serial clock and data traces away from the analog input and reference nodes. Use a continuous ground reference beneath the analog section where the board stackup permits, and provide only the minimum return path needed by the digital interface to prevent switching current from crossing sensitive analog nodes.

Establish the maximum source impedance and acquisition time before finalizing the analog input network. Include the sensor or driver output impedance, resistor noise, capacitance, and the converter's sampling behavior in the settling calculation. Add an anti-alias filter with its own attenuation and phase response, and verify that transient recovery after an input step is acceptable for the 200 kSPS conversion rate.

Design a 5 V source that remains within 4.75 V to 5.25 V under transient loading. Place local high-frequency bypass capacitance at the device and route reference and supply connections as controlled impedances rather than long loops. Confirm startup, shutdown, and reference settling behavior in the intended power sequence, especially when the ADC is sampled immediately after a system reset or supply enable.

Do not substitute AD977ACR for AD977ACRS because their packages and pin counts differ: the AD977ACR is listed in 20-pin SOIC, while the AD977ACRS uses a 28-pin SSOP. Likewise, confirm timing and pin functions before accepting AD977ABRS. The shared 16-bit resolution and 200 kSPS family rating do not by themselves prove that every acquisition, reference, and digital-control detail is interchangeable.

Informações de conformidade

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Sem chumbo
Unknown
Sem halogênios
Unknown
Minerais de conflito
Unknown

RoHS compliance is identified in the component listing. No additional REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification status was confirmed.

Dados verificados em: 2026-11-19 — dados verificados e curados pela equipe de engenharia de componentes da XAIPART

Buscas relacionadas

AD977ACRS datasheet AD977ACRS pinout AD977ACRS datasheet pdf AD977ACRS equivalent AD977ACRS replacement AD977ACRS vs AD977ABRS AD977ACRS 16 bit ADC AD977ACRS 200 kSPS AD977ACRS 28-pin SSOP AD977ACRS price AD977ACRS stock Analog Devices AD977ACRS AD977ACRS sensor acquisition AD977ACRS application circuit

Componentes & termos relacionados

Analog Devices AD977ACRS AD977ABRS AD977ACR AD977A AD977 Analog-to-digital converter ADC Successive approximation SAR ADC 16-bit resolution 200 kSPS Single-channel ADC Serial interface Single-supply operation 5 V supply 28-pin SSOP Surface mount Analog input Voltage reference Anti-alias filter Signal acquisition Industrial instrumentation Process control RoHS
RFQ de cotação rápida
Preencha todos os detalhes — nossa equipe de vendas responderá em até 24 horas
Part number Fabricante Encapsulamento QTY Preço-alvo Total
✓
Cotação enviada!

Responderemos seu e-mail em até 24 horas

1
RFQ enviada
2
Cotação recebida
3
Pedido realizado
4
Pagamento
5
Enviado
6
Entregue
Ver detalhes da RFQ