Analog Devices

AD9832BRU - 25 MHz 10-Bit DDS | Analog Devices Inc.

MPN: AD9832BRU ✓ Nakahanda
16-pin TSSOP Package 25 MHz Speed
MOQ: 1 |

AD9832BRU Ulas

Analog Devices AD9832BRU is a 25 MHz direct digital synthesis IC with a 10-bit DAC, 32-bit phase accumulator, one analog output, and a 16-pin TSSOP package. It generates a digitally controlled sine waveform from a phase accumulator and sine look-up table, providing a compact programmable frequency source for instrumentation, communications, and signal-generation equipment.

A direct digital synthesizer, or DDS, is a frequency-generation technique in which a digital phase accumulator advances at a controlled rate, addresses stored waveform data, and converts the selected samples through a DAC to create an analog waveform. Within the signal-generation hierarchy, a DDS belongs to the broader family of waveform-generator and clock-and-timing integrated circuits.

The AD9832BRU combines a 25 MHz maximum clock specification with a 32-bit tuning architecture and a 10-bit DAC. Its serial programming interface allows the frequency-control registers to be configured by an embedded controller or host processor. The single DAC output provides a sine waveform without requiring the separate lookup table, DAC, and phase accumulator normally assembled from discrete components.

The device uses a numerically controlled oscillator architecture: the phase accumulator advances on each reference-clock cycle, and a frequency tuning word determines the rate at which the phase moves through the sine look-up table. Changing the tuning word changes the output frequency without changing the external reference clock. The 32-bit accumulator provides fine frequency-control resolution, while the 10-bit converter sets the available output amplitude resolution.

Typical uses include low-cost function generators, waveform sources for test systems, tunable local oscillators, communications test equipment, and embedded sine-wave generation. A digital control path is useful when a system needs to change frequency under software control, sweep an output, or coordinate waveform generation with other instrumentation. A reconstruction or low-pass filter is normally used after the DAC output to remove high-frequency image components.

Designers should treat the DDS as a sampled-output system rather than an ideal analog oscillator. The reference clock, power-supply arrangement, output loading, output filter, and grounding layout directly affect frequency accuracy and spectral purity. Use the Analog Devices AD9832 datasheet and its pin-description table to assign signals and select external components. Avoid assuming unloaded output amplitude or supply limits without checking the specified operating conditions.

This page organizes the AD9832BRU architecture, programming considerations, practical application roles, and verified product information for faster engineering evaluation. It also distinguishes verified electrical facts from parameters that must be confirmed in the manufacturer datasheet, helping designers assess the DDS architecture before beginning schematic capture.

Mga alternatibo na pwedeng ilagay na AD9832BRU — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

AD9832BRU Mga Spesipikasyon

Product Type Direct digital synthesis IC
Maksimum na Taktiko ng Oras 25 MHz
DAC Resolution 10 bit
Phase Accumulator Resolution 32 bit
Number of DACs 1 DAC
Programming Interface Serial
Output Waveform Sine wave
Architecture Numerically controlled oscillator
Process Technology CMOS
Packhaging 16-pin TSSOP
Uri ng Pagpapasok Surface mount
Katayuan ng Lifecycle Production

Gabay sa Pin Configuration ng AD9832BRU 16-pin tssop

Pin configuration para sa AD9832BRU (16-pin tssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 16-pin tssop package para sa AD9832BRU

Wala ng detalyadong pinout data na magagamit para sa AD9832BRU.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AD9832BRU ay nararapat para sa 6 aplikasyons: Programmable Function Generator, Communications Test Equipment, Embedded Sine-Wave Source, Audio-Frequency Signal Testing, Automated Test-System Stimulus, Frequency Reference and Calibration.

🔧

Programmable Function Generator

The AD9832BRU suits a basic digital function generator because its 25 MHz maximum clock, 32-bit phase accumulator, and 10-bit DAC generate a programmable sine output from a numerically controlled oscillator. A host controller can load frequency-control words through the serial interface, while the integrated lookup table and DAC reduce external signal-chain complexity. The principal design trade-off is that a reconstruction filter is needed to remove sampled-output images, and the resulting amplitude resolution is 10 bits rather than the higher resolution often desired for precision stimulus generation.

🌐

Communications Test Equipment

The AD9832BRU can provide a compact tunable source for communications test equipment requiring software-controlled frequency changes. Its 32-bit tuning architecture offers fine frequency programming, and the 25 MHz clock capability supports the device's specified operating modes. The controller writes the relevant registers over the serial interface, while the DAC creates the analog test signal. In a practical instrument, the reference clock must be clean, the output must be suitably filtered, and the selected operating range must comply with the Analog Devices AD9832 datasheet.

🏭

Embedded Sine-Wave Source

The AD9832BRU is useful as an embedded sine-wave source in industrial and instrument-control equipment that needs a locally generated reference rather than a fixed analog oscillator. Firmware can update the 32-bit tuning word to select or sweep the output frequency, and the serial interface allows the DDS to share a control bus with other peripherals. Because the signal originates from a 10-bit DAC, output amplitude, distortion, and unwanted image components depend on the supply design, clock quality, DAC loading, and reconstruction-filter implementation.

🎧

Audio-Frequency Signal Testing

The AD9832BRU can generate an audio-frequency sine for speaker, filter, amplifier, and signal-path testing. The 32-bit phase accumulator allows the test system to select frequencies precisely through its frequency tuning word, while the 10-bit DAC provides a compact analog output suitable for general functional tests. For high-fidelity listening evaluation or low-distortion measurements, the generated waveform should be compared with the datasheet noise and distortion limits, and an appropriate reconstruction filter should be added when image rejection is important.

🖥️

Automated Test-System Stimulus

The AD9832BRU provides a programmable excitation source for automated test systems that sweep stimulus frequency without physically adjusting an analog oscillator. Its serial programming interface supports efficient integration with a test controller, and the integrated phase accumulator, sine lookup table, and DAC simplify the source implementation. Each requested frequency requires the correct tuning-word calculation based on the actual reference-clock frequency. The test system should also account for output settling, filter delay, and the limitations of the 10-bit converter when defining measurement accuracy.

📺

Frequency Reference and Calibration

The AD9832BRU can act as a digitally adjustable reference in laboratory or production-calibration equipment. A stable external clock and a calculated tuning word establish the requested output frequency, making the DDS useful when frequent software-driven frequency selection is more valuable than analog tuning. The Analog Devices AD9832 application guidance includes a simulation utility for calculating the required tuning word and estimating spectral behavior. Calibration results depend on reference-clock accuracy, frequency-word quantization, filter response, and measurement setup.

What is the AD9832BRU?
The AD9832BRU is a 25 MHz direct digital synthesis IC with one 10-bit DAC, a 32-bit phase accumulator, and a serial programming interface in a 16-pin TSSOP package. According to the Analog Devices AD9832 product page and datasheet, it implements a numerically controlled oscillator with a phase accumulator and sine look-up table to generate a programmable analog sine waveform.
What are the key specifications of AD9832BRU that engineers should know?
The AD9832BRU combines a 25 MHz maximum clock, 32-bit tuning architecture, 10-bit DAC, one analog output, and serial programming in a 16-pin TSSOP package. According to the Analog Devices AD9832 datasheet, its CMOS implementation uses a phase accumulator and sine look-up table, allowing the output frequency to be controlled digitally through frequency tuning words.
How does the AD9832BRU generate a sine wave?
The AD9832BRU generates a sine wave with a phase accumulator, a sine look-up table, and a 10-bit DAC. According to the Analog Devices AD9832 datasheet, each clock cycle advances the 32-bit phase accumulator by a programmed tuning word; the accumulated phase selects a lookup-table value, and the DAC converts that value into the analog output.
What is the AD9832BRU output resolution and maximum clock frequency?
The AD9832BRU provides a 10-bit DAC and operates with a maximum clock specification of 25 MHz. Its frequency-control architecture uses a 32-bit phase accumulator. According to the Analog Devices AD9832 datasheet, the combination supports digitally programmable sine-wave generation while keeping the external interface and support circuitry compact.
Where can I download the AD9832BRU datasheet PDF?
The official AD9832BRU documentation is available from Analog Devices through the AD9832 product page, which links to the manufacturer datasheet. The product is also identified in distributor documentation as a 25 MHz direct digital synthesizer with a 10-bit DAC, 32-bit tuning word, serial interface, and 16-pin TSSOP package. Use the Analog Devices PDF for authoritative pin assignments and operating limits.
Where can I find the AD9832BRU pinout?
The AD9832BRU pinout is defined in the pin-description table of the Analog Devices AD9832 datasheet. The device uses a 16-pin TSSOP package, and the datasheet should be used to identify the reference-clock input, serial programming pins, control registers, analog output, supply connections, and grounds before assigning PCB tracks.
When should I choose the AD9832BRU over another waveform generator?
Choose the AD9832BRU when a compact, software-programmable sine source is needed and the 25 MHz clock, 32-bit tuning architecture, and 10-bit output resolution meet the design requirements. According to the Analog Devices AD9832 datasheet, its integrated phase accumulator, sine look-up table, and DAC reduce the discrete circuitry required for a basic DDS. It is less suitable when a different waveform, higher-resolution analog output, or unrelated clock-generation function is required.
Can AD9832BRU be used for audio and low-frequency signal generation?
The AD9832BRU can generate a programmable sine waveform for audio-frequency and general-purpose signal-generation tests. Its 32-bit phase accumulator provides fine digital frequency control, while the 10-bit DAC defines the output amplitude resolution. The output filter and allowable amplitude should be selected from the Analog Devices datasheet characteristics for the intended frequency and load.
What is the difference between DDS and a conventional analog oscillator?
A conventional analog oscillator determines frequency through analog components, whereas the AD9832BRU determines frequency digitally with a phase accumulator and a programmed tuning word. According to the Analog Devices AD9832 datasheet, the AD9832BRU also includes the sine lookup table and 10-bit DAC, producing an analog output from digital phase information. This architecture supports software frequency changes but introduces sampled-output images that may require filtering.
What is the best drop-in replacement for AD9832BRU?
No drop-in replacement can be confirmed from the available manufacturer and cross-reference information. A valid replacement must match the 16-pin TSSOP land pattern, pin assignments, supply limits, serial interface, clock requirements, and DDS programming behavior. The AD9832BRUZ tape-and-reel ordering code is not a distinct replacement because it is a packaging variant, and other candidates should be accepted only after their manufacturer datasheets establish pin-to-pin compatibility.
What can replace AD9832BRU in a drop-in design?
A component can replace the AD9832BRU only if it provides the same 16-pin TSSOP footprint and matching electrical and programming interfaces. No qualifying cross-manufacturer part is established by the available cross-reference results. Compare pin names, supply voltage, reference-clock limits, serial timing, frequency-control registers, DAC resolution, and output characteristics against the Analog Devices AD9832 datasheet before approving any substitution.
Is AD9832BRU suitable for a communications test system?
The AD9832BRU is suitable for a communications test system that needs a digitally controlled sine source at the supported clock and output limits. Its 32-bit phase accumulator, serial programming path, and integrated 10-bit DAC permit compact frequency control under a host or embedded controller. According to the Analog Devices AD9832 datasheet, output filtering and reference-clock design remain essential to practical waveform quality.
Does AD9832BRU need an output filter?
An output reconstruction filter is normally required when a clean continuous waveform is needed because the AD9832BRU generates its output through a sampled 10-bit DAC. According to the Analog Devices AD9832 documentation and application guidance, the external reconstruction filter and AD9832 simulation tools are used to evaluate image rejection and spectral performance. The filter design must account for the selected output frequency and clock relationship.
Where can I buy AD9832BRU and check its price and lead time?
Use the Request a Quote form on this page to request the current AD9832BRU price, stock position, lead time, and order quantity. The AD9832BRU is offered in a 16-pin TSSOP package, and Analog Devices identifies the AD9832 family as production. Commercial details can change, so a current quote through this page is the appropriate route for purchasing decisions.
Is AD9832BRU in stock and what is its lead time?
Current stock and lead-time status for the AD9832BRU should be confirmed through the Request a Quote form on this page. The manufacturer identifies the AD9832 family as production, and distributor product records identify the AD9832BRU as a 25 MHz, 10-bit, serial-interface DDS in a 16-pin TSSOP package. Use the quote request for the quantity-specific availability commitment.
Is AD9832BRU RoHS compliant and automotive qualified?
The RoHS, REACH, lead-free, halogen-free, and automotive qualification status of AD9832BRU must be confirmed from the current Analog Devices product documentation or regional compliance declarations. Automotive qualification should not be inferred merely because the DDS is suitable for laboratory or communications equipment. The manufacturer product page and applicable compliance documentation provide the appropriate source for these declarations.

Impormasyon ng Talumpati sa Engineering for AD9832BRU — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the AD9832BRU when the design needs a compact, digitally programmable sine-wave source built around a 25 MHz maximum clock, 32-bit phase accumulator, and 10-bit DAC. It is particularly suitable for automated test equipment, communications instrumentation, embedded signal generation, and audio-frequency functional testing where frequency changes under software control are valuable. The trade-off is that the DAC-based architecture requires careful reference-clock design and usually an output reconstruction filter, while 10-bit resolution may be insufficient for high-fidelity audio or precision amplitude measurement. No drop-in alternative is recommended without a direct manufacturer comparison confirming the 16-pin TSSOP pinout, supply limits, serial timing, register behavior, and output characteristics. The AD9832BRUZ ordering code is a tape-and-reel packaging option rather than an engineering alternative.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Brand Analog Devices
Package 16-pin TSSOP
Product Type Direct digital synthesis IC
Maximum Clock Frequency 25 MHz
DAC Resolution 10 bit
Phase Accumulator Resolution 32 bit
Number of DACs 1 DAC
Programming Interface Serial
Output Waveform Sine wave
Process Technology CMOS
Lifecycle Status Production

Talaan ng Disenyo

Treat the AD9832BRU output as the output of a sampled 10-bit DAC. Place the required reconstruction or low-pass filter close to the analog output, return its ground connection to the device ground, and select the passband around the intended output frequency. Because DDS images are related to the reference clock, changing the clock or tuning word changes the filtering requirement. Use the Analog Devices AD9832 simulation utility to evaluate expected spectral behavior before finalizing the filter.

Assign the reference-clock and serial-interface nets using the pin-description table in the Analog Devices AD9832 datasheet. Keep the clock path compact and away from the analog output and reconstruction-filter components, provide a low-impedance ground return, and decouple the supply pins close to the package. A clean reference clock directly affects frequency accuracy and phase noise, so its source and routing deserve more attention than a generic low-frequency digital signal.

Calculate the frequency tuning word from the actual reference-clock frequency rather than an assumed nominal value; clock error transfers directly into output-frequency error. Also avoid assuming that the register interface of another DDS is interchangeable with the AD9832BRU interface. Firmware must use the AD9832 control-bit definitions, write and update registers in a valid sequence, and account for the time required before the new output frequency is stable.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were included in the referenced product information. Confirm current regional compliance statements with Analog Devices.

Kaugnay na Hanapin

AD9832BRU datasheet AD9832BRU pinout AD9832BRU datasheet pdf AD9832BRU equivalent AD9832BRU replacement AD9832BRU cross reference AD9832BRU price AD9832BRU stock AD9832 25 MHz DDS AD9832BRU TSSOP-16 waveform generator AD9832BRU programmable sine wave source AD9832BRU application circuit Analog Devices AD9832BRU

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices AD9832BRU AD9832 Direct digital synthesizer DDS Numerically controlled oscillator Waveform generator Clock and timing IC Phase accumulator Frequency tuning word Sine look-up table Digital-to-analog converter 10-bit DAC 32-bit phase accumulator Serial programming interface CMOS 16-pin TSSOP TSSOP package family Surface mount Reconstruction filter 25 MHz reference clock Communications test equipment Programmable function generator Audio-frequency signal generation
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ