ADF4002SRU-EP - 400MHz 1-Channel RF PLL | Analog Devices
MPN: ADF4002SRU-EP ✓ NakahandaADF4002SRU-EP Ulas
A phase-locked loop, or PLL, is a feedback-control system that compares a reference signal with a divided output signal and drives an error correction toward frequency and phase lock. Within the clock and timing hierarchy, a PLL frequency synthesizer supports local-oscillator generation, clock multiplication, demodulation, modulation, and frequency translation. The ADF4002SRU-EP is intended for systems where one synthesizer channel is sufficient and a compact surface-mount footprint is preferred.
The principal identified specifications are a 400 MHz maximum operating frequency, one synthesizer channel, and a 16-TSSOP package. Its phase-detector role is significant because the device can participate in a closed feedback loop rather than operating as an open-loop clock source. The single-channel architecture simplifies board planning when the system does not require multiple independently programmed synthesis paths. The package also supports conventional surface-mount assembly rather than through-hole insertion.
ADF4002SRU-EP is based on an Analog Devices PLL product family intended for local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. In such systems, a phase detector and frequency synthesizer establish the reference relationship needed by a feedback loop. The integration of these functions can reduce the number of separate timing components required around an RF signal chain, while the dedicated RF-oriented part family keeps the architecture focused on frequency generation and phase control.
Typical uses include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion chains, phase-control loops, and compact communication equipment. It can also serve as the timing element in systems that derive an internal coherent signal from an external reference. Product selection should begin with the intended reference and synthesized frequencies, loop bandwidth requirements, channel count, supply limits, temperature range, and the required output configuration.
PCB implementation should preserve clean separation between sensitive reference and feedback paths, the synthesizer output, and the loop-filter network. Keep the loop-filter components close to their associated device pins, provide short ground returns, and follow the manufacturer pin and layout guidance for the 16-TSSOP footprint. Confirm capacitance, voltage, and current limits against the manufacturer datasheet before releasing a production design.
This page organizes the exact package, frequency, channel, and positioning information for ADF4002SRU-EP alongside practical RF-layout guidance, application fit criteria, and a careful assessment of documented alternatives. It also distinguishes true pin-compatible replacement candidates from parts that use a different package or provide a different clock architecture.
Mga alternatibo na pwedeng ilagay na ADF4002SRU-EP — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
ADF4002SRU-EP-RL7
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ADF4002SRU
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ADF4002SRU-E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
ADF4002SRU-EP Mga Spesipikasyon
| Product Type | Clock/Frequency Synthesizer (RF), Phase Detector IC |
| Maximum Listed Frequency | 400 MHz |
| Number of Channels | 1 channel |
| Packhaging | 16-TSSOP |
| Package Width | 0.173 in |
| Package Length | 4.40 mm |
| Product Family | ADF4002 |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng ADF4002SRU-EP 4.40 mm
Pin configuration para sa ADF4002SRU-EP (4.40 mm package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ADF4002SRU-EP.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ADF4002SRU-EP ay nararapat para sa 6 aplikasyons: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Down-Conversion Clocking, Communications Test Equipment, Phase-Locked Reference Architecture, Compact RF Communication Module.
Wireless Receiver Local Oscillator
The ADF4002SRU-EP fits a wireless receiver local-oscillator position because it combines one RF frequency-synthesis channel with phase-detector functionality and supports operation up to 400 MHz. It can be placed in the feedback architecture used to derive a coherent local oscillator from a reference. The 16-TSSOP package limits board width, while the single-channel arrangement avoids unnecessary synthesis stages when the receiver needs only one programmable RF signal. Confirm the reference and output limits in the manufacturer datasheet before final loop-bandwidth and component selection.
Wireless Transmitter Up-Conversion
The ADF4002SRU-EP is applicable in a wireless transmitter up-conversion chain that requires phase-controlled local-oscillator generation. Its documented 400 MHz maximum operating frequency, one synthesis channel, and integrated phase-detector function support a feedback loop for establishing signal phase. The 16-TSSOP package is useful where board area is constrained. The oscillator phase noise, reference requirements, spur performance, and allowable tuning range must be checked against the manufacturer electrical characteristics before committing to the transmitter design.
RF Down-Conversion Clocking
In an RF down-conversion block, the ADF4002SRU-EP can serve as the PLL timing element that maintains the required relationship between a local oscillator and the incoming signal path. The single-channel architecture matches designs needing one coherent synthesized frequency rather than multiple independent outputs. Its 400 MHz listed operating limit provides the central frequency figure for initial architecture checks, while the compact 16-TSSOP footprint simplifies routing in dense RF boards. Verify minimum operating frequency, tuning granularity, and phase-noise limits in the manufacturer datasheet.
Communications Test Equipment
The ADF4002SRU-EP can support compact communications test equipment that derives an internal reference-related RF signal from a stable external source. Its phase-detector functionality is useful for closing the PLL loop, while the single synthesis channel reduces complexity when the instrument requires only one local-oscillator path. The 16-TSSOP package is well suited to multichannel instrument assemblies where PCB area and routing density matter. Confirm output drive, reference sensitivity, operating temperature, and loop stability against the manufacturer datasheet before laboratory integration.
Phase-Locked Reference Architecture
The ADF4002SRU-EP is suitable for a phase-locked reference architecture in which an external reference is compared with a divided feedback signal. Its documented maximum operating frequency of 400 MHz and integrated phase-detector function align with RF feedback-control designs. The one-channel implementation keeps the control topology straightforward and the 16-TSSOP package minimizes footprint compared with larger multi-channel options. Designers should set loop bandwidth from the required phase-noise and settling behavior, then validate component values against the manufacturer loop-filter guidance.
Compact RF Communication Module
The ADF4002SRU-EP can serve as the local timing element in a compact RF communication module where one synthesized frequency and phase control are needed. Its one-channel architecture limits system complexity, and the 16-TSSOP package provides a practical surface-mount footprint for space-constrained assemblies. The 400 MHz maximum listed frequency makes it appropriate for initial evaluation in RF sub-GHz and related intermediate-frequency architectures. Before layout release, verify RF output specifications, supply range, reference format, thermal performance, and all absolute maximum ratings in the manufacturer datasheet.
Impormasyon ng Talumpati sa Engineering for ADF4002SRU-EP — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto |
|---|---|
| Brand | Analog Devices |
| Package | 16-TSSOP |
| Pin Count | 16 pins |
| Maximum Listed Frequency | 400 MHz |
| Number of Channels | 1 channel |
| Device Function | RF clock/frequency synthesizer with phase-detector functionality |
| Package Width | 0.173 in |
| Package Length | 4.40 mm |
Pangunahing mga Pagkakaiba
- Uses a compact 16-TSSOP footprint (kumpara saADF4002BCPZ-RL7)
- Combines frequency-synthesis and phase-detection functions (kumpara saADF4002BCPZ-RL7)
- Single-channel architecture (kumpara saADF4002BCPZ-RL7)
Talaan ng Disenyo
Use the manufacturer pin-description table and application layout as the authority for assigning every ADF4002SRU-EP connection. Keep the loop-filter network close to the associated pins, minimize loop area, and provide short ground returns. Route the synthesizer output away from the reference and feedback paths where practical to reduce coupling into the phase-sensitive section of the design.
Protect the reference and feedback routes from digital, switching, and RF coupling because disturbances can appear as phase noise, reference spurs, or loop instability. Use a continuous ground reference beneath the device when the board stackup permits, maintain consistent return paths, and keep high-current switching nodes physically separated. Validate the final arrangement with time-domain and phase-noise measurements.
Do not infer the reference range, synthesized output range, supply limits, or pin functions from the 400 MHz headline figure alone. Confirm those values in the manufacturer datasheet and ensure that the reference signal, loop filter, output load, and bypass network match the recommended application circuit. This is particularly important when replacing an existing PLL because similar package names do not guarantee equivalent behavior.
Impormasyon ng Pagsunod sa Kautusan
Compliance and qualification statements must be confirmed from the current Analog Devices product documentation or declaration for the exact MPN.