Analog Devices

ADF4002SRU-EP - 400MHz 1-Channel RF PLL | Analog Devices

MPN: ADF4002SRU-EP ✓ فعال
16-TSSOP Package 400 MHz Speed
حداقل سفارش: 1 |

ADF4002SRU-EP نمای کلی

Analog Devices ADF4002SRU-EP is a single-channel RF clock and frequency synthesizer with phase-detector functionality, a maximum listed operating frequency of 400 MHz, and a 16-lead TSSOP package measuring 0.173 inches wide by 4.40 mm long. It belongs to the clock and timing IC category and combines frequency synthesis and phase comparison functions for RF signal-chain designs.

A phase-locked loop, or PLL, is a feedback-control system that compares a reference signal with a divided output signal and drives an error correction toward frequency and phase lock. Within the clock and timing hierarchy, a PLL frequency synthesizer supports local-oscillator generation, clock multiplication, demodulation, modulation, and frequency translation. The ADF4002SRU-EP is intended for systems where one synthesizer channel is sufficient and a compact surface-mount footprint is preferred.

The principal identified specifications are a 400 MHz maximum operating frequency, one synthesizer channel, and a 16-TSSOP package. Its phase-detector role is significant because the device can participate in a closed feedback loop rather than operating as an open-loop clock source. The single-channel architecture simplifies board planning when the system does not require multiple independently programmed synthesis paths. The package also supports conventional surface-mount assembly rather than through-hole insertion.

ADF4002SRU-EP is based on an Analog Devices PLL product family intended for local oscillators in the up-conversion and down-conversion sections of wireless receivers and transmitters. In such systems, a phase detector and frequency synthesizer establish the reference relationship needed by a feedback loop. The integration of these functions can reduce the number of separate timing components required around an RF signal chain, while the dedicated RF-oriented part family keeps the architecture focused on frequency generation and phase control.

Typical uses include wireless receiver and transmitter local oscillators, RF up-conversion and down-conversion chains, phase-control loops, and compact communication equipment. It can also serve as the timing element in systems that derive an internal coherent signal from an external reference. Product selection should begin with the intended reference and synthesized frequencies, loop bandwidth requirements, channel count, supply limits, temperature range, and the required output configuration.

PCB implementation should preserve clean separation between sensitive reference and feedback paths, the synthesizer output, and the loop-filter network. Keep the loop-filter components close to their associated device pins, provide short ground returns, and follow the manufacturer pin and layout guidance for the 16-TSSOP footprint. Confirm capacitance, voltage, and current limits against the manufacturer datasheet before releasing a production design.

This page organizes the exact package, frequency, channel, and positioning information for ADF4002SRU-EP alongside practical RF-layout guidance, application fit criteria, and a careful assessment of documented alternatives. It also distinguishes true pin-compatible replacement candidates from parts that use a different package or provide a different clock architecture.

جایگزین‌های drop-in برای ADF4002SRU-EP — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

ADF4002SRU-EP-RL7

✅ جایگزین مستقیم
📦 16-pin TSSOP
Same ADF4002SRU-EP family and 16-pin TSSOP package; RL7 ordering qualification details require confirmation, with key functional parameters treated as 0% different.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4002SRU

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 16-pin TSSOP
Same ADF4002 family and 16-pin TSSOP footprint; the EP military -55°C to +125°C qualification is not assumed for the standard grade, producing an estimated 10% parameter proximity.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4002SRU-E

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 16-pin TSSOP
Same ADF4002 family and 16-pin TSSOP footprint; temperature and EP qualification may differ by ordering option, producing an estimated 10% parameter proximity.

📋 جایگزین مرجع (خارج از کاتالوگ)

ADF4002SRU-EP مشخصات

Product Type Clock/Frequency Synthesizer (RF), Phase Detector IC
Maximum Listed Frequency 400 MHz
Number of Channels 1 channel
بسته‌بندی 16-TSSOP
Package Width 0.173 in
Package Length 4.40 mm
Product Family ADF4002
نوع نصب Surface mount

راهنمای پیکربندی پین ADF4002SRU-EP 4.40 mm

پیکربندی پین برای ADF4002SRU-EP (پکیج 4.40 mm). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 4.40 mm برای ADF4002SRU-EP

داده پین‌آوت تفصیلی موجود نیست برای ADF4002SRU-EP.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADF4002SRU-EP مناسب است برای 6 کاربردs: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Down-Conversion Clocking, Communications Test Equipment, Phase-Locked Reference Architecture, Compact RF Communication Module.

🌐

Wireless Receiver Local Oscillator

The ADF4002SRU-EP fits a wireless receiver local-oscillator position because it combines one RF frequency-synthesis channel with phase-detector functionality and supports operation up to 400 MHz. It can be placed in the feedback architecture used to derive a coherent local oscillator from a reference. The 16-TSSOP package limits board width, while the single-channel arrangement avoids unnecessary synthesis stages when the receiver needs only one programmable RF signal. Confirm the reference and output limits in the manufacturer datasheet before final loop-bandwidth and component selection.

🌐

Wireless Transmitter Up-Conversion

The ADF4002SRU-EP is applicable in a wireless transmitter up-conversion chain that requires phase-controlled local-oscillator generation. Its documented 400 MHz maximum operating frequency, one synthesis channel, and integrated phase-detector function support a feedback loop for establishing signal phase. The 16-TSSOP package is useful where board area is constrained. The oscillator phase noise, reference requirements, spur performance, and allowable tuning range must be checked against the manufacturer electrical characteristics before committing to the transmitter design.

📡

RF Down-Conversion Clocking

In an RF down-conversion block, the ADF4002SRU-EP can serve as the PLL timing element that maintains the required relationship between a local oscillator and the incoming signal path. The single-channel architecture matches designs needing one coherent synthesized frequency rather than multiple independent outputs. Its 400 MHz listed operating limit provides the central frequency figure for initial architecture checks, while the compact 16-TSSOP footprint simplifies routing in dense RF boards. Verify minimum operating frequency, tuning granularity, and phase-noise limits in the manufacturer datasheet.

📡

Communications Test Equipment

The ADF4002SRU-EP can support compact communications test equipment that derives an internal reference-related RF signal from a stable external source. Its phase-detector functionality is useful for closing the PLL loop, while the single synthesis channel reduces complexity when the instrument requires only one local-oscillator path. The 16-TSSOP package is well suited to multichannel instrument assemblies where PCB area and routing density matter. Confirm output drive, reference sensitivity, operating temperature, and loop stability against the manufacturer datasheet before laboratory integration.

🔧

Phase-Locked Reference Architecture

The ADF4002SRU-EP is suitable for a phase-locked reference architecture in which an external reference is compared with a divided feedback signal. Its documented maximum operating frequency of 400 MHz and integrated phase-detector function align with RF feedback-control designs. The one-channel implementation keeps the control topology straightforward and the 16-TSSOP package minimizes footprint compared with larger multi-channel options. Designers should set loop bandwidth from the required phase-noise and settling behavior, then validate component values against the manufacturer loop-filter guidance.

📱

Compact RF Communication Module

The ADF4002SRU-EP can serve as the local timing element in a compact RF communication module where one synthesized frequency and phase control are needed. Its one-channel architecture limits system complexity, and the 16-TSSOP package provides a practical surface-mount footprint for space-constrained assemblies. The 400 MHz maximum listed frequency makes it appropriate for initial evaluation in RF sub-GHz and related intermediate-frequency architectures. Before layout release, verify RF output specifications, supply range, reference format, thermal performance, and all absolute maximum ratings in the manufacturer datasheet.

What is the ADF4002SRU-EP?
The ADF4002SRU-EP is a single-channel RF clock and frequency synthesizer with phase-detector functionality from Analog Devices. The manufacturer listing identifies a maximum operating frequency of 400 MHz and a 16-TSSOP package measuring 0.173 inches wide by 4.40 mm long. It is a clock and timing IC intended for feedback-controlled frequency-generation and phase-control applications.
What are the key specifications of ADF4002SRU-EP that engineers should know?
The key documented specifications for the ADF4002SRU-EP are a 400 MHz maximum operating frequency, one synthesis channel, and a 16-TSSOP package with a stated width of 0.173 inches and length of 4.40 mm. According to the Analog Devices product listing, it is a clock/frequency synthesizer with phase-detector functionality, making it suitable for RF local-oscillator and feedback-loop implementations.
What is the operating frequency of ADF4002SRU-EP?
The maximum listed operating frequency of the ADF4002SRU-EP is 400 MHz. This figure identifies the upper frequency associated with the device in the Analog Devices product listing; it should not be treated as a complete description of every input or output operating limit. Confirm the reference, phase-detector, and synthesized-output ranges in the manufacturer datasheet for the intended design.
Where can I download the ADF4002SRU-EP datasheet PDF?
The ADF4002SRU-EP datasheet is available through Analog Devices under the ADF4002 family documentation. Use the manufacturer datasheet to verify the complete pin description, electrical characteristics, recommended loop-filter values, and application circuit. The product-page datasheet link on this page provides direct access to the relevant family documentation for engineering review.
Where can I find the ADF4002SRU-EP pinout?
The ADF4002SRU-EP pinout must be taken from the pin-description table in the Analog Devices ADF4002 manufacturer datasheet. The component uses a 16-TSSOP package, so the PCB land pattern requires 16 electrical positions and correct pin-1 orientation. Assign signal names only after checking the manufacturer pin table rather than inferring connections from the package outline.
Is ADF4002SRU-EP suitable for wireless receiver and transmitter local oscillators?
Yes, the ADF4002SRU-EP is intended for local-oscillator use in the up-conversion and down-conversion sections of wireless receivers and transmitters. Its documented 400 MHz maximum operating frequency and phase-detector functionality support phase-locked frequency-generation architectures. The actual suitability depends on the required output frequency, reference frequency, loop bandwidth, and supply constraints.
What can replace the ADF4002SRU-EP?
No independently verified cross-manufacturer drop-in replacement for the ADF4002SRU-EP is established on this page. The documented ADF4002BCPZ-RL7 uses a 20-pin LFCSP package rather than the 16-TSSOP footprint, so it is not a drop-in substitute without PCB changes. Request a quote for the exact MPN when production continuity is required.
Is ADF4002SRU-EP the same as ADF4002BCPZ-RL7?
No, ADF4002SRU-EP and ADF4002BCPZ-RL7 are not the same package or interchangeable without redesign. ADF4002SRU-EP is identified as a 16-TSSOP RF clock/frequency synthesizer with phase-detector functionality, while ADF4002BCPZ-RL7 is listed as a 20-pin LFCSP clock generator. Their different footprints prevent direct board-level substitution.
When should I choose ADF4002SRU-EP instead of a 20-pin LFCSP clock generator?
Choose the ADF4002SRU-EP when the board already uses its 16-TSSOP footprint and the design benefits from an integrated RF frequency-synthesizer and phase-detector function. The documented 400 MHz maximum frequency and single-channel architecture align with compact RF timing systems. A 20-pin LFCSP clock generator may be preferable only when a different architecture and footprint redesign are acceptable.
Is ADF4002SRU-EP suitable for a single-channel RF phase-locked loop?
The ADF4002SRU-EP is suitable for a single-channel RF phase-locked loop because the product is identified as a one-channel clock/frequency synthesizer with phase-detector functionality. The 400 MHz maximum operating frequency supports RF-focused designs. Final suitability depends on whether the desired reference and output frequencies fall within the device's detailed operating limits.
What is the best cross-brand equivalent for ADF4002SRU-EP?
No cross-brand pin-compatible equivalent has been validated for the ADF4002SRU-EP. The available cross-reference material points to different-device architectures and packages, including the 20-pin LFCSP ADF4002BCPZ-RL7, rather than a confirmed 16-TSSOP drop-in replacement. Use the Request a Quote form on this page when sourcing the original device or discussing an engineering substitution.
What is the difference between ADF4002SRU-EP and ADF4002BCPZ-RL7?
The principal documented difference is package and device positioning. ADF4002SRU-EP is a 400 MHz, one-channel RF clock/frequency synthesizer with phase-detector functionality in a 16-TSSOP package. ADF4002BCPZ-RL7 is listed as a clock generator with up to 4 GHz input in a 20-pin LFCSP package, so it is not pin-to-pin compatible.
How should the ADF4002SRU-EP loop-filter PCB area be designed?
Place the ADF4002SRU-EP loop-filter components close to the pins specified by the manufacturer pin-description table, and keep the feedback and reference routes short. Provide a low-impedance ground return and isolate the synthesizer output from sensitive phase-detector paths where practical. Use the manufacturer application circuit as the basis for component placement and ground treatment.
Where can I buy ADF4002SRU-EP and check current price and stock?
Use the Request a Quote form on this page to request the current ADF4002SRU-EP price, stock status, lead time, and minimum order quantity. The component is identified as a 16-TSSOP RF clock/frequency synthesizer rated to 400 MHz with one channel. Supply conditions should be confirmed for the exact package suffix and production quantity.
How much does ADF4002SRU-EP cost and what is its lead time?
Current pricing, stock, and lead time for the ADF4002SRU-EP should be requested through the Request a Quote form on this page. Quote requests can specify the required quantity, delivery location, and acceptable production schedule. The device is identified as a one-channel, 400 MHz RF PLL in a 16-TSSOP package.
Is ADF4002SRU-EP currently in stock?
Current inventory for the exact ADF4002SRU-EP should be confirmed through the Request a Quote form on this page. Stock can vary with package suffix and order quantity, so a generic product-page indication does not guarantee allocation for a production build. Include the forecast demand and target delivery schedule with the request.

داده‌های مرجع مهندسی برای ADF4002SRU-EP — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the ADF4002SRU-EP when the design needs one RF frequency-synthesis channel with phase-detector functionality, operates within the documented 400 MHz maximum frequency, and already accommodates a 16-TSSOP footprint. Its integrated PLL timing function is appropriate for wireless receiver and transmitter local-oscillator loops. The ADF4002BCPZ-RL7 may appear in cross-reference listings, but its 20-pin LFCSP package prevents drop-in use and its clock-generator positioning differs from the target. No verified cross-brand drop-in replacement is established. For a new design, compare frequency limits, reference requirements, tuning range, phase noise, output drive, supply range, and temperature grade rather than selecting by maximum frequency alone. If the ADF4002SRU-EP is already on the PCB and remains active, retaining it generally minimizes schematic, layout, and qualification changes.

مقایسه با جایگزین‌ها

پارامتر این محصول
Brand Analog Devices
Package 16-TSSOP
Pin Count 16 pins
Maximum Listed Frequency 400 MHz
Number of Channels 1 channel
Device Function RF clock/frequency synthesizer with phase-detector functionality
Package Width 0.173 in
Package Length 4.40 mm

تفاوت‌های کلیدی

  • Uses a compact 16-TSSOP footprint (در مقابلADF4002BCPZ-RL7)
  • Combines frequency-synthesis and phase-detection functions (در مقابلADF4002BCPZ-RL7)
  • Single-channel architecture (در مقابلADF4002BCPZ-RL7)

یادداشت‌های طراحی

Use the manufacturer pin-description table and application layout as the authority for assigning every ADF4002SRU-EP connection. Keep the loop-filter network close to the associated pins, minimize loop area, and provide short ground returns. Route the synthesizer output away from the reference and feedback paths where practical to reduce coupling into the phase-sensitive section of the design.

Protect the reference and feedback routes from digital, switching, and RF coupling because disturbances can appear as phase noise, reference spurs, or loop instability. Use a continuous ground reference beneath the device when the board stackup permits, maintain consistent return paths, and keep high-current switching nodes physically separated. Validate the final arrangement with time-domain and phase-noise measurements.

Do not infer the reference range, synthesized output range, supply limits, or pin functions from the 400 MHz headline figure alone. Confirm those values in the manufacturer datasheet and ensure that the reference signal, loop filter, output load, and bypass network match the recommended application circuit. This is particularly important when replacing an existing PLL because similar package names do not guarantee equivalent behavior.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

Compliance and qualification statements must be confirmed from the current Analog Devices product documentation or declaration for the exact MPN.

تاریخ تأیید داده‌ها: 2026-11-10 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADF4002SRU-EP datasheet ADF4002SRU-EP specifications ADF4002SRU-EP datasheet pdf ADF4002SRU-EP pinout ADF4002SRU-EP equivalent ADF4002SRU-EP replacement ADF4002SRU-EP cross reference ADF4002SRU-EP vs ADF4002BCPZ-RL7 ADF4002SRU-EP footprint ADF4002SRU-EP application circuit ADF4002SRU-EP price ADF4002SRU-EP stock Analog Devices ADF4002SRU-EP ADF4002SRU-EP 400MHz PLL ADF4002 16-TSSOP pinout

قطعات و اصطلاحات مرتبط

Analog Devices ADF4002SRU-EP ADF4002 ADF4002BCPZ-RL7 ADF4002SRU-EP-RL7 phase-locked loop PLL phase detector frequency synthesizer clock generator clock and timing IC RF local oscillator wireless receiver wireless transmitter up-conversion down-conversion feedback control loop filter reference input 400 MHz 16-TSSOP TSSOP family surface-mount package SMD RoHS REACH AEC-Q100
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ