ADF4112BCPZ - 3GHz Integer-N RF PLL | Analog Devices
MPN: ADF4112BCPZ ✓ NakahandaADF4112BCPZ Ulas
An RF PLL frequency synthesizer is a closed-loop timing-control IC that locks a voltage-controlled oscillator to a stable reference frequency. It belongs to the phase-locked-loop family, which provides frequency synthesis, clock generation, modulation, and frequency translation within wireless transmitters and receivers. The ADF4112 supports CMOS or TTL reference inputs and produces a clock output for use as a local oscillator or system clock source.
Key features include an RF bandwidth of 4 GHz, a programmable 4/5 or 8/9 dual-modulus prescaler, programmable charge-pump current, and a separate VP connection for extended tuning-voltage capability. The product page identifies the A counter as 6 bits and the B counter as 13 bits, allowing programmable division ratios. The 3.3 V supply operation suits compact RF and wireless designs using contemporary low-voltage signal-chain architectures.
Technically, the synthesizer uses an integer-N architecture to generate an output frequency derived from the reference, reference divider, prescaler, and programmable feedback counters. Its phase-frequency detector and charge pump generate an error current that controls the tuning path of an external voltage-controlled oscillator. A properly selected loop filter and external VCO remain central to achieving low phase noise, adequate locking time, and clean spectral performance.
Typical applications include wireless receiver and transmitter local oscillators, up-conversion and down-conversion sections in RF systems, instrumentation and test equipment, and frequency-generation modules for industrial or communication equipment. Its 3 GHz maximum output frequency makes it suitable for systems operating within the RF bandwidth of the device when the prescaler, counters, reference, VCO, and loop filter are configured correctly.
Design around the separate VP pin by reviewing the external VCO tuning range and charge-pump requirements in the manufacturer datasheet. Keep the RF output path short, use a controlled reference signal, and place loop-filter components close to the synthesizer pins. Thermal design should account for the exposed pad and the copper area available on the PCB.
This product page combines the exact ADF4112BCPZ identifiers, verified package information, application guidance, design considerations, and a conservative replacement analysis. It focuses on engineering suitability rather than treating a related PLL as interchangeable without verified pin and parameter equivalence.
Mga alternatibo na pwedeng ilagay na ADF4112BCPZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok ADF4112BCPZ (parehas na form factor at footprint) — pagkakaiba sa A Counter, B Counter, Package, Charge Pump, Input Frequency Range.
ADF4112BCPZ-RL7
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
ADF4113BCPZ
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →ADF4112BCPZ Mga Spesipikasyon
| Product Type | Integer-N RF PLL frequency synthesizer |
| Maximum Synthesized Frequency | 3 GHz |
| RF Bandwidth | 4 GHz |
| Input Frequency Range | 5 MHz to 3 GHz |
| Volte ng Pagbibigay | 3.3 V |
| Input Logic | CMOS or TTL |
| Type ng Output | Clock |
| Architecture | Single integer-N PLL |
| Prescaler Ratios | 4/5 or 8/9 |
| A Counter | 6 bits |
| B Counter | 13 bits |
| Charge Pump | Programmable current |
| VP Connection | Separate connection for extended tuning voltage |
| Packhaging | 20-lead LFCSP with exposed pad |
| Number of Circuits | 1 |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng ADF4112BCPZ 20-lead lfcsp with exposed pad
Pin configuration para sa ADF4112BCPZ (20-lead lfcsp with exposed pad package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.
Wala ng detalyadong pinout data na magagamit para sa ADF4112BCPZ.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
ADF4112BCPZ ay nararapat para sa 6 aplikasyons: Wireless Receiver Local Oscillator, Wireless Transmitter Up-Conversion, RF Down-Conversion, Test and Measurement Instrumentation, Industrial RF Control Systems, Communications Module Clocking.
Wireless Receiver Local Oscillator
The ADF4112BCPZ is appropriate for generating a programmable local-oscillator signal in wireless receiver conversion paths. Its 3 GHz maximum synthesized frequency, 4 GHz RF bandwidth, and programmable 4/5 or 8/9 prescaler support division-ratio planning across common RF operating bands. The reference frequency enters the integer-N loop along with the A and B counters, while the charge pump and external loop filter control the associated voltage-controlled oscillator. The separate VP connection also supports VCO designs needing an extended tuning range, provided its limits are reviewed in the manufacturer datasheet.
Inirekomenda
Wireless Transmitter Up-Conversion
In a transmitter up-conversion chain, the ADF4112BCPZ can provide the stable local-oscillator reference needed by an RF mixer or frequency-conversion stage. Its programmable prescaler, 6-bit A counter, and 13-bit B counter enable the desired integer-N frequency ratio to be established from a stable reference. The low-voltage 3.3 V supply suits compact RF assemblies, while the 4 GHz RF bandwidth covers the stated operating class of the synthesizer. The external VCO, loop filter, reference source, and charge-pump settings must be tuned together to achieve the required phase noise and lock behavior.
Inirekomenda
RF Down-Conversion
The ADF4112BCPZ can support an RF down-conversion subsystem by supplying a programmable clock for a mixer or demodulator. Its integer-N architecture derives the output from the reference divider, prescaler, A counter, and B counter, enabling deterministic frequency planning without fractional-N digital division. The 3 GHz maximum synthesized frequency is suitable for many microwave receiver stages, while the stated 4 GHz RF bandwidth broadens the usable signal range. Engineering evaluation should include reference phase-noise contribution, VCO tuning sensitivity, loop bandwidth, and the separate VP requirement of the external tuning network.
Inirekomenda
Test and Measurement Instrumentation
A programmable PLL can simplify the clock architecture of RF test and measurement equipment requiring selectable frequencies. The ADF4112BCPZ offers integer-N synthesis up to 3 GHz, programmable prescaler choices of 4/5 and 8/9, and programmable charge-pump current for tuning an external voltage-controlled oscillator. These controls allow the loop dynamics to be matched to different reference rates and settling requirements. For instrumentation, phase noise, reference purity, spur performance, and lock-time requirements should be evaluated as a complete chain rather than inferred from the 3 GHz output-frequency limit alone.
Inirekomenda
Industrial RF Control Systems
Industrial RF control systems can use the ADF4112BCPZ when a compact, programmable frequency source is needed for sensing, monitoring, or communication hardware. Its single PLL architecture reduces the number of synthesis blocks while retaining programmable divider ratios and charge-pump settings. The 3.3 V supply supports integration into compact mixed-signal assemblies, and the exposed-pad LFCSP package requires deliberate thermal and return-path layout. Designers should establish the required output frequency, reference stability, allowed spurious content, and environmental limits before fixing the loop filter and VCO selection.
Inirekomenda
Communications Module Clocking
The ADF4112BCPZ can act as the programmable RF timing source within compact communications modules that require coherent local-oscillator generation. Its maximum synthesized frequency of 3 GHz, 4 GHz RF bandwidth, and selectable dual-modulus prescaler support multiple frequency plans. The 6-bit A counter and 13-bit B counter provide programmable integer-N division, while the separate VP connection accommodates extended VCO tuning voltage. Compact modules benefit from the 20-lead LFCSP footprint, but RF trace control, exposed-pad grounding, reference isolation, and loop-filter placement remain essential for predictable phase-noise and spur performance.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for ADF4112BCPZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | ADF4112BCPZ-RL7 | ADF4113BCPZ |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 20-lead LFCSP exposed pad | 20-lead LFCSP exposed pad - verify ordering drawing | 20-lead LFCSP exposed pad |
| Product Type | Single integer-N RF PLL | Single integer-N RF PLL | Integer-N RF PLL |
| RF Bandwidth | 4 GHz | 4 GHz | 4 GHz |
| Supply Voltage | 3.3 V | 3.3 V | 3.3 V |
| Charge Pump | Programmable current | Programmable current | Programmable current |
| Reference Divider | Programmable | Programmable | Programmable |
Pangunahing mga Pagkakaiba
- Same-family ordering option preserves the ADF4112 RF bandwidth (kumpara saADF4112BCPZ-RL7)
- Single integer-N RF PLL architecture (kumpara saADF4113BCPZ)
- Separate VP connection supports extended VCO tuning voltage (kumpara saADF4113BCPZ)
Talaan ng Disenyo
Place the reference input, feedback-divider input, and RF output paths using short, controlled-impedance traces. Keep the loop filter close to the charge-pump and feedback connections, with its ground return connected directly to the exposed-pad ground structure. The separate VP connection and external VCO tuning network should be isolated from sensitive reference and RF paths to reduce modulation coupling and unwanted phase noise.
Follow the manufacturer land pattern for the 20-lead LFCSP exposed-pad package and provide adequate ground-via density beneath and around the exposed pad. Thermal performance depends on both the pad connection and the available copper plane, so do not treat the exposed pad as optional. Verify the pin-one orientation and pin functions against the ADF4112 datasheet before assigning tracks or connecting the separate VP supply.
Select the 4/5 or 8/9 prescaler according to the required VCO output frequency and confirm that the resulting integer-N division ratio is valid for the reference and counter ranges. Programmable charge-pump current must be coordinated with the loop filter and VCO gain; excessive current can increase ringing or instability, while insufficient current can slow acquisition. The VP voltage limit must also be confirmed against the external tuning range.
Impormasyon ng Pagsunod sa Kautusan
The ADF4112 family is listed as production by Analog Devices, but no explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was stated for the exact ADF4112BCPZ ordering code.