Analog Devices

ADF5610BCCZ-RL7 - 14.6 GHz Integrated VCO PLL | Analog Devices

MPN: ADF5610BCCZ-RL7 ✗ Tapus ng Buhay
VPRST, Pin 35 Vdss 48-VFLGA exposed-pad package Package 14.6 GHz Speed
MOQ: 1 |

ADF5610BCCZ-RL7 Ulas

The Analog Devices ADF5610BCCZ-RL7 is a microwave wideband frequency synthesizer with an integrated voltage-controlled oscillator, supporting integer-N and fractional-N phase-locked-loop operation up to 14.6 GHz in a 48-VFLGA exposed-pad package. It is designed for RF and microwave systems that require an integrated synthesizer, flexible division, and programmable RF output generation.

An integrated VCO is a frequency-control component that combines a voltage-controlled oscillator with active frequency-generation circuitry. In the ADF5610, the VCO has a fundamental frequency range of 3650 MHz to 7300 MHz. The fundamental signal is internally doubled and routed to the RFOUT pin, while a differential output provides additional divided frequencies. This architecture places the synthesizer between RF signal-generation functions and wider communications, test, and instrumentation systems.

The ADF5610 supports a broad tuning range from approximately 57 MHz at the lowest divided output to 14.6 GHz at the highest output. Its 3-wire serial interface provides programming access for configuration and control. The device is suitable for wideband microwave synthesizer implementations where integrating the VCO into the synthesizer simplifies the RF signal chain and reduces the number of separate frequency-generation components.

The core operating principle is fractional-N or integer-N PLL synthesis using an external loop filter and external reference source. The differential divided output can provide divided VCO frequencies, enabling flexible output planning across wideband systems. The integrated VCO also supports a calibration sequence, with a temperature-related calibration voltage available at VPRST for die-temperature estimation during operation.

Typical uses include microwave communications modules, radar and test equipment, frequency-conversion subsystems, and wideband RF signal generators. The 48-VFLGA exposed-pad package is intended for surface-mount assembly and requires careful PCB thermal management and short RF connections. The ADF5610BCCZ-RL7 is marked obsolete by the manufacturer’s distributor listing, so new designs should confirm lifecycle status and consider the current ADF5610 product family options before releasing production quantities.

Mga alternatibo na pwedeng ilagay na ADF5610BCCZ-RL7 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ADF5610BCCZ-RL7 (parehas na form factor at footprint) — pagkakaiba sa Device Type, Package.

Analog Devices
Device Type: Integer-N/Fractional-N PLL frequency synthesizer with integrated VCO
Package: 48-VFLGA with exposed pad
Ikabit sa ADF5610BCCZ-RL7 →

ADF5610BCCZ

✅ Drop-In
Analog Devices
📦 48-VFLGA exposed-pad package
Integer-N/Fractional-N PLL frequency synthesizer with integrated VCO · 14.6 GHz · 3650 MHz to 7300 MHz · 1, 2, 4, 8, 16, 32, 64, 128 · 57 MHz · 3-wire SPI · 48-VFLGA with exposed pad · HLGA

Magkontak para sa presyo

Tingnan ang Datasheet →

ADF5611

✅ Drop-In
📦 48-VFLGA exposed-pad package
Related synthesizer with a different frequency-generation configuration; target maximum output is 14.6 GHz and the candidate’s exact output range differs

📋 Alternatibo na Reference (hindi sa katalogo)

ADF5612

✅ Drop-In
📦 48-VFLGA exposed-pad package
Related synthesizer with different tuning and output coverage; target maximum output is 14.6 GHz and the candidate’s exact maximum differs

📋 Alternatibo na Reference (hindi sa katalogo)

ADF5613

✅ Drop-In
📦 48-VFLGA exposed-pad package
Related synthesizer with different output-frequency coverage; target maximum output is 14.6 GHz and the candidate’s exact maximum differs

📋 Alternatibo na Reference (hindi sa katalogo)

LTC6957

✅ Drop-In
📦 48-VFLGA exposed-pad package
Cross-family PLL synthesizer candidate with different VCO and divider coverage; target maximum output is 14.6 GHz while the candidate’s exact maximum differs

📋 Alternatibo na Reference (hindi sa katalogo)

ADF5610BCCZ-RL7 Mga Spesipikasyon

Device Type Microwave wideband synthesizer with integrated VCO
PLL Architecture Integer-N or fractional-N phase-locked loop
Maximum RF Output Frequency 14.6 GHz
Fundamental VCO Frequency Range 3650 MHz to 7300 MHz
Minimum Divided RF Output Frequency 57 MHz
Divided Output Ratios 1, 2, 4, 8, 16, 32, 64, or 128
Serial Interface 3-wire SPI
Reference Requirement External reference source
Loop Filter External
Packhaging 48-VFLGA exposed-pad package
Package Pin Count 48 pins
Uri ng Pagpapasok Surface mount
Type ng Output Differential divided RF output and doubled VCO output
Calibration Voltage Pin VPRST, Pin 35
Temperature Grade Industrial

Gabay sa Pin Configuration ng ADF5610BCCZ-RL7 48 pins

Pin configuration para sa ADF5610BCCZ-RL7 (48 pins package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 48 pins package para sa ADF5610BCCZ-RL7

Wala ng detalyadong pinout data na magagamit para sa ADF5610BCCZ-RL7.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADF5610BCCZ-RL7 ay nararapat para sa 6 aplikasyons: Microwave Communications Modules, Radar and Test Equipment, Frequency Conversion Subsystems, Wideband RF Signal Generators, Microwave Up-Converter Front Ends, RF Calibration and Production Test.

🌐

Microwave Communications Modules

The ADF5610BCCZ-RL7 is suitable for wideband microwave communication modules that need an integrated VCO and programmable frequency synthesis in one package. Its fundamental VCO range of 3650 MHz to 7300 MHz and internally doubled output path support RF generation up to 14.6 GHz, reducing the number of separate oscillator and multiplier blocks. The 3-wire SPI interface allows a host controller to configure the synthesizer during system startup or tune the operating channel. In a communication front end, the device can sit behind the reference and loop-filter network and feed a controlled RF signal path. Engineers should preserve short RF traces, provide the manufacturer-recommended decoupling, and validate the loop filter against the required phase noise and lock-time targets.

🖥️

Radar and Test Equipment

The ADF5610BCCZ-RL7 can support radar, instrumentation, and RF test systems requiring programmable wideband RF output. The integrated VCO covers 3650 MHz to 7300 MHz at its fundamental frequency, and the divided output supports ratios of 1, 2, 4, 8, 16, 32, 64, and 128. This division range allows a single synthesizer architecture to serve multiple test frequencies when the system can accept the corresponding output level and spur performance. The external loop filter and reference source are critical to achieving repeatable lock behavior and phase-noise performance. Use controlled impedance routing for RF connections and verify the calibration sequence during power-up before relying on the output for measurement accuracy.

📡

Frequency Conversion Subsystems

The ADF5610BCCZ-RL7 is useful in frequency-conversion subsystems where a local oscillator must cover microwave bands while supporting programmable output selection. Its doubled VCO path reaches 14.6 GHz, and the divided differential output provides lower-frequency options down to approximately 57 MHz. This flexibility can simplify the architecture of wideband up-converters, down-converters, and multi-band signal chains. The synthesizer should be referenced to a clean external source and its loop bandwidth should be selected according to the required lock time and phase-noise profile. RF output matching, isolation from noisy digital and switching circuitry, and solid exposed-pad thermal design are essential for maintaining predictable performance in a compact microwave assembly.

🧰

Wideband RF Signal Generators

The ADF5610BCCZ-RL7 can serve as the core wideband synthesizer in an RF signal generator or laboratory source. The 57 MHz to 14.6 GHz output span, combined with selectable divider ratios, provides flexibility for generating multiple test tones from one integrated frequency-generation block. Its SPI programming interface makes it suitable for automated lab equipment controlled by a microcontroller or embedded processor. Signal-level accuracy still depends on the external reference, loop filter, output matching network, and calibration procedure. Layout should separate sensitive reference and control traces from RF output routing, while the exposed pad requires uninterrupted ground-plane connection for heat transfer. Validate phase noise, spurious content, and lock behavior across the intended operating band.

📶

Microwave Up-Converter Front Ends

The ADF5610BCCZ-RL7 is appropriate for microwave up-converter front ends requiring a programmable local oscillator. The high-frequency output capability of 14.6 GHz supports RF synthesis around microwave carrier bands, while the divided outputs can provide local-oscillator signals for lower-frequency conversion stages. The integrated VCO simplifies the synthesizer section compared with a discrete VCO plus multiplier arrangement, although the external reference and loop filter remain necessary. In a compact RF module, control traces and supply routing must be isolated from the local-oscillator path to reduce pulling and unwanted modulation. Use short, impedance-controlled RF connections and validate the synthesizer against the converter’s phase-noise and isolation requirements.

🏭

RF Calibration and Production Test

The ADF5610BCCZ-RL7 can support automated RF calibration and production-test fixtures that require repeatable wideband frequency generation. Programmable divider ratios and a 3-wire SPI control path allow the test controller to select operating points and capture calibration results efficiently. The external reference quality directly influences frequency repeatability, while the loop-filter design determines lock time and phase noise around each commanded frequency. For production fixtures, isolate the synthesizer from tester switching networks and use stable reference and supply arrangements to reduce measurement variation. The 48-VFLGA package is compact, but its exposed pad and RF pins require careful thermal and assembly design for repeatable performance over temperature and repeated test cycles.

What is the ADF5610BCCZ-RL7?
The ADF5610BCCZ-RL7 is an Analog Devices microwave wideband synthesizer with an integrated VCO. According to the manufacturer datasheet, it supports integer-N and fractional-N PLL operation, a fundamental VCO range of 3650 MHz to 7300 MHz, and RF output frequencies up to 14.6 GHz. The device uses a 3-wire SPI interface and is housed in a 48-VFLGA exposed-pad package.
What is the output frequency range of ADF5610BCCZ-RL7?
The ADF5610BCCZ-RL7 can generate RF output frequencies from approximately 57 MHz to 14.6 GHz. According to the Analog Devices ADF5610 datasheet, the VCO fundamental range is 3650 MHz to 7300 MHz, and the internally doubled VCO signal is routed to the RFOUT pin. Divided-output ratios from 1 through 128 provide lower-frequency outputs.
Where can I download the ADF5610BCCZ-RL7 datasheet PDF?
The official ADF5610 datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF5610.pdf. The ADF5610 product page at https://www.analog.com/en/products/adf5610.html also links to the device documentation and evaluation resources. Use the manufacturer datasheet for pin assignments, electrical limits, calibration details, and recommended application circuits.
What is the pinout of the ADF5610BCCZ-RL7?
The ADF5610BCCZ-RL7 uses a 48-VFLGA exposed-pad package, and the manufacturer datasheet identifies the relevant signal and supply assignments. Pin 35 is VPRST, the temperature-related calibration voltage used to estimate die junction temperature. For a complete production layout, assign every power, ground, RF, control, and exposed-pad connection directly from the pin-description table in the ADF5610 datasheet.
Is the ADF5610BCCZ-RL7 obsolete?
The ADF5610BCCZ-RL7 is identified as obsolete and no longer manufactured in its distributor listing. The manufacturer product page remains available for the ADF5610 family and technical documentation. For new production programs, request current lifecycle confirmation and review the current ADF5610 family ordering options through the Request a Quote form on this page.
What is the best drop-in replacement for ADF5610BCCZ-RL7?
The closest same-family replacement candidate is the ADF5610BCCZ, which is the non-obsolete ordering form associated with the ADF5610 synthesizer family. It uses the same 48-VFLGA device family and functional architecture, but production use still requires confirmation of pin, electrical, and lifecycle equivalence. Use the ADF5610 datasheet and the Request a Quote form to verify the exact replacement configuration.
Can ADF5611 or ADF5612 replace ADF5610BCCZ-RL7?
ADF5611 and ADF5612 are listed in the cross-reference information as comparable RF synthesizer families, but they are not automatically drop-in replacements for the ADF5610BCCZ-RL7. Their frequency ranges, divider configurations, interface details, and package assignments must be compared against the ADF5610 datasheet. Treat them as redesign candidates unless the manufacturer documentation confirms pin-to-pin compatibility.
Where can I buy ADF5610BCCZ-RL7 online?
The ADF5610BCCZ-RL7 can be sourced through the Request a Quote form on this page. Because the part is marked obsolete, availability may be limited to remaining inventory or legacy supply. Provide the required quantity, packaging preference, and target delivery schedule in the quote request so the current sourcing status can be confirmed.
What is the price of ADF5610BCCZ-RL7?
The current commercial price for the obsolete ADF5610BCCZ-RL7 should be confirmed through the Request a Quote form on this page. The structured listing retains a historical unit-price reference for legacy procurement, but current pricing can vary with remaining inventory, quantity, condition, and delivery requirements. Submit the requested quantity and packaging details for an actionable quotation.
Is ADF5610BCCZ-RL7 in stock and what is its lead time?
Current stock and lead time for the obsolete ADF5610BCCZ-RL7 should be confirmed through the Request a Quote form on this page. Remaining supply can vary by lot and order quantity, so a firm delivery commitment requires the manufacturer or an authorized supply channel to confirm allocation. Include your required delivery date in the quote request.
What is the difference between ADF5610 and ADF5610BCCZ-RL7?
The ADF5610BCCZ-RL7 is the complete orderable MPN with the BCCZ package designation and RL7 shipment form, while ADF5610 is the family name used in the manufacturer documentation. The device architecture includes an integrated VCO, integer-N and fractional-N PLL operation, a 3650 MHz to 7300 MHz fundamental range, and output capability up to 14.6 GHz. Confirm lifecycle and suffix availability before production release.
When should I choose ADF5610BCCZ-RL7 instead of a discrete VCO and PLL solution?
Choose the ADF5610BCCZ-RL7 when an integrated microwave synthesizer simplifies a design that would otherwise combine a separate VCO, PLL, and related frequency-generation circuitry. Its integrated VCO supports a 3650 MHz to 7300 MHz fundamental range and produces outputs up to 14.6 GHz, while the external reference and loop filter remain important design components. The choice is less attractive for new production when lifecycle risk is unacceptable.
Does the ADF5610BCCZ-RL7 use an internal or external reference?
The ADF5610BCCZ-RL7 uses an external reference source together with an external loop filter for integer-N or fractional-N PLL operation. According to the Analog Devices product information, the integrated VCO and programmable RF output paths provide the core synthesizer function, while the external reference and loop filter support system-specific frequency accuracy and loop tuning. The reference and filter design should follow the manufacturer application guidance.
What are the key specifications of ADF5610BCCZ-RL7?
The ADF5610BCCZ-RL7 is a 48-VFLGA microwave synthesizer with an integrated VCO, integer-N and fractional-N PLL capability, a 3650 MHz to 7300 MHz fundamental range, and RF output up to 14.6 GHz. It provides a divided differential output with selectable ratios from 1 to 128, a 3-wire SPI interface, and a temperature-related calibration voltage at VPRST, Pin 35. The package is surface-mount with an exposed pad.
How is the ADF5610BCCZ-RL7 used in a wideband RF design?
The ADF5610BCCZ-RL7 is typically placed in the RF signal-generation section of a wideband design and programmed through its 3-wire SPI interface. The VCO fundamental range is 3650 MHz to 7300 MHz, and the internally doubled signal supports high-frequency RF output, while divided outputs cover lower frequencies. The external loop filter, reference source, decoupling, exposed-pad thermal design, and controlled RF layout determine practical performance.

Impormasyon ng Talumpati sa Engineering for ADF5610BCCZ-RL7 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADF5610BCCZ-RL7 for a legacy design that specifically requires the ADF5610 architecture, its 3650 MHz to 7300 MHz fundamental VCO range, and its 14.6 GHz maximum RF output. The integrated VCO, integer-N and fractional-N PLL modes, and divider ratios through 128 make it useful for wideband microwave modules, RF conversion chains, and test equipment. Prefer the current ADF5610BCCZ ordering form for maintenance or controlled transition when its lifecycle and electrical equivalence are confirmed. Consider ADF5611, ADF5612, or ADF5613 when their frequency ranges and divider architecture better match a new design, but do not treat them as automatic replacements. LTC6957 may be useful for a different PLL architecture, yet its pinout and specifications require direct comparison. Because the target is obsolete, any new production design should balance lifecycle risk against RF performance.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADF5610BCCZ ADF5611 ADF5612 ADF5613 LTC6957
Package 48-VFLGA exposed-pad package 48-VFLGA exposed-pad package 48-VFLGA exposed-pad package 48-VFLGA exposed-pad package 48-VFLGA exposed-pad package 48-VFLGA exposed-pad package
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices

Pangunahing mga Pagkakaiba

  • Integrated VCO reaches a 14.6 GHz maximum RF output (kumpara saADF5611)
  • Eight divider choices extend low-frequency flexibility (kumpara saADF5612)
  • Integrated microwave synthesizer simplifies frequency generation (kumpara saLTC6957)

Talaan ng Disenyo

Place the external reference, loop-filter, and decoupling networks close to their associated pins. Keep the RF output path short and use a continuous reference plane beneath the RF routing where the board stackup permits. The 48-VFLGA exposed pad should connect to the ground plane through a dense via field, while thermal and RF return-current paths should be reviewed together rather than optimized independently.

Treat the exposed pad as a primary thermal path. Provide uninterrupted copper beneath the device and use multiple thermal vias to distribute heat into the board structure. Validate junction-temperature margin at the highest operating frequency, output level, and ambient temperature. Because the synthesizer integrates an active VCO and PLL, RF-output power, supply dissipation, and ambient conditions should all be included in the thermal verification.

Design the loop filter for the required lock time, phase noise, and reference-spur performance. Keep the SPI control routing away from the sensitive reference and RF nodes, and terminate the interface according to the manufacturer’s recommended configuration. After layout fabrication, verify lock behavior, spur content, and output stability across the full 3650 MHz to 7300 MHz fundamental VCO range and across the commanded divided-output settings.

Do not treat the divided-output frequency as an independent guarantee of output power. Signal amplitude, return loss, and usable frequency can depend on the selected divider and the external output network. Check the datasheet limits for each divider ratio, use the specified reference and filter configurations, and avoid assuming that ADF5611, ADF5612, ADF5613, or LTC6957 can replace the target without a complete pin and specification review.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The target is a commercial microwave synthesizer rather than an automotive-qualified device. Compliance declarations should be confirmed for any remaining legacy inventory before production use.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADF5610BCCZ-RL7 ADF5610BCCZ-RL7 datasheet ADF5610BCCZ-RL7 datasheet pdf ADF5610BCCZ-RL7 pinout ADF5610BCCZ-RL7 replacement ADF5610BCCZ-RL7 equivalent ADF5610BCCZ-RL7 price ADF5610BCCZ-RL7 stock ADF5610BCCZ 14.6 GHz VCO ADF5610BCCZ 48-VFLGA pinout ADF5610 vs ADF5611 ADF5610BCCZ-RL7 application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices ADF5610 ADF5610BCCZ-RL7 ADF5610BCCZ ADF5611 ADF5612 ADF5613 LTC6957 microwave wideband synthesizer integrated VCO voltage-controlled oscillator fractional-N PLL integer-N PLL 3-wire SPI RF synthesizer frequency divider 3650 MHz to 7300 MHz 14.6 GHz 57 MHz 48-VFLGA exposed-pad package surface-mount package VPRST external reference source loop filter microwave communications
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ