Analog Devices

ADM213EARS - 5V 4/5 RS-232 Transceiver | Analog Devices

MPN: ADM213EARS ✓ Nakahanda
5 V Vdss EIA-232E and CCITT V.28 Rds(on) 28-pin SSOP Package
MOQ: 1 |

ADM213EARS Ulas

The Analog Devices ADM213EARS is a 4-driver, 5-receiver RS-232 transceiver designed for single 5 V supply operation in a 28-pin SSOP package. It supports data rates up to 230 kbps, provides shutdown and enable control functions, and keeps two receivers active during shutdown. The device is intended for EIA-232E and CCITT V.28 communications interfaces where conventional ±12 V RS-232 levels must be generated from a low-voltage supply.

An RS-232 transceiver is an interface IC that combines line drivers and line receivers on one chip. The drivers convert low-voltage logic signals into RS-232-compatible levels, while the receivers convert bipolar RS-232 signals into logic-compatible outputs. The ADM213E belongs to the broader hierarchy of RS-232 interface transceiver, communications interface IC, interface IC, and semiconductor product categories.

Key features include four transmit drivers, five receive channels, data-rate operation up to 230 kbps, and a 0.1 µF charge-pump capacitor. Shutdown control reduces power consumption when the interface is inactive, while enable control supports individual transmitter operation. The ADM213E family is designed for harsh electrical environments and includes electrostatic-discharge protection as described by Analog Devices.

The device uses a CMOS-compatible 5 V architecture and on-chip charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 transmitters. Only one 0.1 µF capacitor is required for charge-pump operation according to the ADM213 product description. Two receiver channels remain active during shutdown, allowing selected incoming signals to be monitored without keeping every transmitter and receiver enabled.

Typical applications include industrial serial-port interfaces, instrumentation, data-acquisition equipment, point-of-sale terminals, and embedded control systems. The four-driver configuration supports multiple outbound channels, while five receivers support inbound status, handshake, and data signals. In systems using RS-232 only for legacy peripheral connectivity, the single 5 V supply simplifies interface design compared with discrete ±12 V driver circuits.

PCB implementation requires careful placement of the charge-pump capacitor and protection-network connections. Follow the pin-description table and application circuit in the manufacturer datasheet when assigning tracks, and keep interface and logic return paths appropriately separated to minimize common-mode noise. Confirm that cable length and baud rate remain within the limits specified for the selected EIA-232 or CCITT V.28 operating mode.

This product page consolidates the ADM213E family architecture, package information, verified interface ratings, application guidance, comparison data, and design considerations into a design-oriented reference. It helps engineers distinguish supply, shutdown, enable, channel-count, and package considerations before selecting an RS-232 transceiver for a new board.

Mga alternatibo na pwedeng ilagay na ADM213EARS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Wala ng magagamit na drop-in alternatibo para sa produkto na ito.

Hilingin ang Alternatibo

ADM213EARS Mga Spesipikasyon

Product Type RS-232 transceiver
Volte ng Pagbibigay 5 V
Number of Drivers 4
Number of Receivers 5
Maximum Data Rate 230 kbps
Charge-Pump Capacitor 0.1 µF
Shutdown Control Yes
Enable Control Yes
Receivers Active in Shutdown 2
Interface Standards EIA-232E and CCITT V.28
Packhaging 28-pin SSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ADM213EARS 28-pin ssop

Pin configuration para sa ADM213EARS (28-pin ssop package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 28-pin ssop package para sa ADM213EARS

Wala ng detalyadong pinout data na magagamit para sa ADM213EARS.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADM213EARS ay nararapat para sa 6 aplikasyons: Industrial Serial-Port Interface, Data-Acquisition and Instrumentation, Embedded Control and Configuration, Point-of-Sale Terminal, Portable Test and Measurement Equipment, Network Equipment Management Port.

🏭

Industrial Serial-Port Interface

The ADM213EARS is appropriate for industrial equipment that needs several RS-232 channels but has only a 5 V power rail. Four drivers can support outbound control, status, and data connections, while five receivers provide flexibility for incoming commands and handshake signals. Operation up to 230 kbps accommodates legacy industrial peripherals that exceed the older 19.2 kbps limit. The shutdown function reduces consumption when the port is idle, and enable control can deactivate individual transmitters. Because the ADM213E operates at 5 V while producing the bipolar voltage levels required by RS-232, it simplifies the interface compared with a discrete implementation using separate ±12 V driver circuits.

🔧

Data-Acquisition and Instrumentation

A data-acquisition unit can use the ADM213EARS to connect legacy instruments that expose multiple RS-232 ports. The four transmit drivers can command instruments, request measurements, or route device-control signals, while the five receivers can collect readings and equipment status. The 230 kbps maximum rate is useful when an instrument uses a faster serial mode than 9600 or 19.2 kbps. Its single 5 V operating supply simplifies analog and digital power planning, and the shutdown input helps the instrument conserve power between measurement sessions. External protection should still be designed for the actual cable environment because the internal interface is intended for EIA-232E and CCITT V.28 communications rather than isolated long-distance telemetry.

🧩

Embedded Control and Configuration

The ADM213EARS fits embedded controllers that retain a legacy configuration port while also offering multiple service or diagnostic channels. Four drivers support command output and service-console activity, and five receivers allow the controller to read responses, hardware status, and interlocks. Operation from a single 5 V rail is convenient for controller boards that already use low-voltage digital supplies. The enable pins allow unused transmitter paths to be switched off, while the shutdown mode can reduce demand when the legacy interface is inactive. Two receivers remaining active during shutdown is particularly useful when a system must detect a remote wake-up, charger-present, or service-request signal without enabling the complete interface.

🖥️

Point-of-Sale Terminal

A point-of-sale terminal can use the ADM213EARS to interface several legacy peripherals through one RS-232 transceiver. Typical connections include a receipt printer, magnetic-stripe reader, customer display, and weighing scale, allowing the system to combine multiple point-to-point serial links. The four transmitter channels and five receiver channels cover command and response traffic for several devices, while the 230 kbps capability provides headroom for burst-oriented transactions. A single 5 V supply reduces the need for a separate RS-232 power rail in compact terminals. Enable control should be coordinated with peripheral readiness, and shutdown can be used when the terminal enters a low-power state. The external connector interface still requires appropriate surge and ESD protection for exposed cables.

📡

Portable Test and Measurement Equipment

The ADM213EARS is suitable for portable test equipment that must communicate with older RS-232 instruments while running from a compact 5 V power system. The transceiver combines four drivers and five receivers in a single 28-pin SSOP, preserving board area while supporting multiple serial connections. The shutdown control helps reduce consumption between measurement runs, while the option to keep two receivers active allows the instrument to detect a connected accessory or remote request. The 230 kbps rate supports higher-speed legacy links, but cable length remains a practical limitation. The board should separate logic-ground and interface-return paths where possible and apply the manufacturer's reference network close to the connector.

🌐

Network Equipment Management Port

The ADM213EARS can support a management console or service interface in equipment where RS-232 remains required for installation and maintenance. Multiple driver and receiver channels allow the platform to expose command, status, and console functions without adding several separate interface packages. Its single 5 V operation and 230 kbps capability suit dense control boards, while shutdown helps isolate unused legacy circuitry. The device is not a replacement for Ethernet, CAN, or differential RS-485 links, so it is most appropriate as a local service interface alongside a modern network transceiver. Use a separate protection strategy for an externally accessible connector, and verify grounding and level compatibility with every attached service adapter before field deployment.

What is the ADM213EARS?
The ADM213EARS is a single-chip RS-232 transceiver containing four line drivers and five line receivers in a 28-pin SSOP package. According to the Analog Devices ADM213E product information, it operates from a single 5 V supply, supports data rates up to 230 kbps, and provides shutdown and enable control functions. It is intended for EIA-232E and CCITT V.28 communications interfaces.
What are the key specifications of ADM213EARS that engineers should know?
The ADM213EARS combines four RS-232 drivers, five receivers, a 5 V supply, and operation up to 230 kbps in a 28-pin SSOP. According to the Analog Devices ADM213 and ADM213E product pages, shutdown and enable pins are provided, two receivers remain active during shutdown, and the charge-pump circuit requires a 0.1 µF capacitor. The interface conforms to EIA-232E and CCITT V.28 specifications.
What supply voltage does the ADM213EARS require?
The ADM213EARS operates from a single 5 V supply. Analog Devices describes the ADM2xxE family as robust RS-232 and V.28 interface devices that operate from a single +5 V power supply. This allows the device to produce the bipolar signal levels required for RS-232 without requiring separate positive and negative supply rails. Follow the manufacturer application circuit for capacitor connection and supply decoupling.
How many RS-232 drivers and receivers are in the ADM213EARS?
The ADM213EARS contains four RS-232 drivers and five receivers. The Analog Devices ADM213 product description identifies the part as a 5 V CMOS RS-232 transceiver with four drivers and five receivers. Two receivers remain active during shutdown, providing a way to monitor selected incoming lines while the other interface functions are disabled.
What is the maximum data rate of the ADM213EARS?
The ADM213EARS supports data rates up to 230 kbps. Analog Devices states that the ADM213E family fully conforms to the EIA-232E and CCITT V.28 specifications and operates at data rates up to 230 kbps. Actual channel performance also depends on cable characteristics, grounding, loading, and the specific standard implemented by the connected equipment.
What can replace the ADM213EARS?
A direct replacement must use the same 28-pin SSOP footprint and preserve the ADM213EARS pin functions, 5 V supply, four-driver and five-receiver configuration, and RS-232 signal levels. No independently verified pin-to-pin substitute was identified for the exact ADM213EARS ordering code. Use the Request a Quote form on this page for sourcing assistance, and validate any proposed substitute against the manufacturer pin-description table before redesigning the board.
Is the ADM213EARS the same as the ADM213E?
The ADM213EARS is an orderable 28-pin SSOP version of the ADM213E RS-232 transceiver family, with the ARS suffix identifying its specific package and ordering configuration. The Analog Devices ADM213E page describes the electrical family, including its 5 V operation, EIA-232E and CCITT V.28 conformance, shutdown capability, and operation up to 230 kbps. The suffix should not be changed during replacement without checking the exact pin and package drawing.
When should I choose the ADM213EARS for an RS-232 design?
Choose the ADM213EARS when a compact board needs four RS-232 transmit channels, five receive channels, a single 5 V rail, and data rates as high as 230 kbps. Its shutdown and enable controls are useful in portable, industrial, and embedded systems where unused transmitters must be disabled. Select it only when the 28-pin SSOP layout and EIA-232E or CCITT V.28 operating requirements match the existing design.
Is the ADM213EARS suitable for industrial serial communication?
The ADM213EARS is suitable for RS-232 interfaces that must operate from 5 V and support EIA-232E or CCITT V.28 communications. Analog Devices describes the ADM213E family as suitable for harsh electrical environments and provides shutdown and enable controls. Industrial suitability should still be confirmed against the device's specified operating temperature, isolation requirements, surge exposure, and the protection scheme used on the external RS-232 connector.
What is the difference between ADM213EARS and a MAX3221 transceiver?
The principal functional difference is channel count and control architecture: the ADM213EARS provides four drivers and five receivers, while the MAX3221 family is a more compact single-channel RS-232 transceiver. According to the Analog Devices ADM213 product information, the ADM213EARS also supports shutdown, enable control, and two receivers active during shutdown. Because their channel counts and pin requirements differ, they are not direct drop-in equivalents.
What is the best cross-brand equivalent for the ADM213EARS?
The best equivalent must preserve the 28-pin SSOP footprint, four transmitters, five receivers, 5 V supply, 0.1 µF charge-pump arrangement, and shutdown or enable behavior. The available cross-reference results did not establish a different manufacturer's part with those identical pin and electrical characteristics. Treat any proposed cross-brand device as a design review item rather than a drop-in replacement until its manufacturer datasheet confirms package, pinout, channel count, and timing ratings.
Where can I download the ADM213EARS datasheet PDF?
The official Analog Devices ADM213E product page is the preferred starting point for the ADM213EARS datasheet and supporting documentation. It identifies the device as a 5 V RS-232 and V.28 interface operating up to 230 kbps. Use the manufacturer pin-description table, application circuit, and ordering information to confirm the 28-pin SSOP footprint, charge-pump capacitor value, shutdown behavior, and electrical limits for the exact ADM213EARS suffix.
Where can I find the ADM213EARS pinout?
The ADM213EARS pinout is defined by the 28-pin SSOP pin-description table in the Analog Devices ADM213E datasheet. Pin assignments must be taken from that table because the family includes shutdown, enable, multiple driver outputs, multiple receiver outputs, supply pins, and ground connections. Use the manufacturer drawing rather than inferring connections from a generic 28-pin SSOP symbol, then verify exposed-pad or thermal-pad requirements for the exact mechanical drawing.
How should the ADM213EARS be used for low-power design?
Use the shutdown control to reduce power consumption when the interface is not active, and use enable control to disable individual transmitters when only some outbound channels are required. Two receiver channels remain active during shutdown, allowing selected status or incoming signals to remain observable. Analog Devices identifies the shutdown feature as a low-power mode, while the exact supply-current values and timing behavior should be taken from the datasheet.
Where to buy ADM213EARS online and what is its price and lead time?
Use the Request a Quote form on this page to request the current ADM213EARS price, stock position, minimum order quantity, and lead time. The part is a standard Analog Devices 28-pin SSOP RS-232 transceiver, and the manufacturer lists the ADM213 family as production product. Commercial terms can vary with order quantity and supply conditions, so a current quotation is more useful than a static price or unverified delivery estimate.

Impormasyon ng Talumpati sa Engineering for ADM213EARS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADM213EARS when the design needs four RS-232 transmitters, five receivers, a single 5 V supply, and data rates up to 230 kbps. Its shutdown input can reduce consumption during inactive periods, enable control can deactivate individual drivers, and two receivers can remain active for monitoring. The 28-pin SSOP package is appropriate when the board has been laid out specifically for this family. Consider MAX3221IPWR or MAX3221CDBR when one RS-232 channel is sufficient, since those devices can simplify routing and reduce board area but do not reproduce the ADM213EARS channel count. Use an RS-422 or RS-485 transceiver when the application requires differential signaling, longer cable reach, or multi-drop communication. Because no drop-in substitute with a confirmed 28-pin pinout and equivalent channel configuration was established, do not replace the ADM213EARS solely on a matching package description; verify the complete pinout, control logic, electrical levels, and timing first.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto
Product Type 4/5 RS-232 transceiver
Brand Analog Devices
Package 28-pin SSOP
Supply Voltage 5 V
Number of Drivers 4
Number of Receivers 5
Maximum Data Rate 230 kbps
Charge-Pump Capacitor 0.1 µF
Shutdown and Enable Controls Yes; two receivers active during shutdown
Interface Standards EIA-232E and CCITT V.28

Pangunahing mga Pagkakaiba

  • Four-driver and five-receiver integration (kumpara saMAX3221IPWR)
  • Configurable shutdown and channel-enable behavior (kumpara saMAX3221CDBR)
  • Higher supported RS-232 data rate (kumpara saMAX3221IPWR)

Talaan ng Disenyo

Implement the charge-pump capacitor connection and supply decoupling exactly as shown in the Analog Devices ADM213E application circuit. Place the 0.1 µF capacitor close to its designated device pins and keep the loop formed by the capacitor and IC as small as practical. Follow the manufacturer pin-description table when assigning all 28 SSOP positions; generic SSOP pinout conventions are not safe substitutes for the device-specific drawing.

Do not treat the 5 V supply pin as an RS-232 signal-level reference. The ADM213EARS internally develops the bipolar levels required for RS-232 transmission, but external cables and connected equipment can present ± voltage. Confirm receiver and driver levels against EIA-232E or CCITT V.28 requirements, and ensure every unused driver or receiver connection follows the manufacturer's recommended termination arrangement.

Use the shutdown and enable inputs to reduce switching and drive demand when channels are unused. The ADM213EARS keeps two receiver channels active during shutdown, which can be valuable for wake-up or status detection but also prevents complete interface isolation. Review the datasheet's supply-current and enable-state values before assigning a power budget, and avoid repeatedly toggling shutdown if that operating pattern conflicts with the manufacturer's specified behavior.

Separate logic and RS-232 return paths as far as practical, particularly around switching supplies and high-speed digital circuitry. Keep the interface network adjacent to the connector when surge protection is used, and route the transceiver-side connections away from sensitive analog inputs. This arrangement reduces common-mode coupling and helps preserve receiver margin in electrically noisy industrial environments.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer states conformity with EIA-232E and CCITT V.28. Material-compliance declarations were not established from the available product information.

Data napatotohanan sa: 2026-11-14 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADM213EARS datasheet ADM213EARS pinout ADM213EARS datasheet pdf ADM213EARS 28-SSOP ADM213EARS 230 kbps ADM213EARS 5V RS-232 transceiver Analog Devices ADM213EARS ADM213EARS equivalent ADM213EARS replacement ADM213EARS cross reference ADM213EARS vs MAX3221IPWR ADM213EARS price ADM213EARS stock ADM213EARS application circuit

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices ADM213EARS ADM213 ADM213E RS-232 transceiver RS-232 interface line driver line receiver interface IC semiconductor CMOS EIA-232E CCITT V.28 5 V power supply 230 kbps shutdown control enable control charge-pump capacitor 0.1 µF capacitor 28-pin SSOP SSOP family surface-mount package industrial communication data acquisition MAX3221IPWR
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ