ADM213EARS - 5V 4/5 RS-232 Transceiver | Analog Devices
MPN: ADM213EARS ✓ 啟用中ADM213EARS 概覽
An RS-232 transceiver is an interface IC that combines line drivers and line receivers on one chip. The drivers convert low-voltage logic signals into RS-232-compatible levels, while the receivers convert bipolar RS-232 signals into logic-compatible outputs. The ADM213E belongs to the broader hierarchy of RS-232 interface transceiver, communications interface IC, interface IC, and semiconductor product categories.
Key features include four transmit drivers, five receive channels, data-rate operation up to 230 kbps, and a 0.1 µF charge-pump capacitor. Shutdown control reduces power consumption when the interface is inactive, while enable control supports individual transmitter operation. The ADM213E family is designed for harsh electrical environments and includes electrostatic-discharge protection as described by Analog Devices.
The device uses a CMOS-compatible 5 V architecture and on-chip charge-pump circuitry to generate the positive and negative voltage levels required by RS-232 transmitters. Only one 0.1 µF capacitor is required for charge-pump operation according to the ADM213 product description. Two receiver channels remain active during shutdown, allowing selected incoming signals to be monitored without keeping every transmitter and receiver enabled.
Typical applications include industrial serial-port interfaces, instrumentation, data-acquisition equipment, point-of-sale terminals, and embedded control systems. The four-driver configuration supports multiple outbound channels, while five receivers support inbound status, handshake, and data signals. In systems using RS-232 only for legacy peripheral connectivity, the single 5 V supply simplifies interface design compared with discrete ±12 V driver circuits.
PCB implementation requires careful placement of the charge-pump capacitor and protection-network connections. Follow the pin-description table and application circuit in the manufacturer datasheet when assigning tracks, and keep interface and logic return paths appropriately separated to minimize common-mode noise. Confirm that cable length and baud rate remain within the limits specified for the selected EIA-232 or CCITT V.28 operating mode.
This product page consolidates the ADM213E family architecture, package information, verified interface ratings, application guidance, comparison data, and design considerations into a design-oriented reference. It helps engineers distinguish supply, shutdown, enable, channel-count, and package considerations before selecting an RS-232 transceiver for a new board.
直接替換替代品,適用於 ADM213EARS — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此產品無可直接替換的替代品。
申請替代品ADM213EARS 規格
| Product Type | RS-232 transceiver |
| 供應電壓 | 5 V |
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Capacitor | 0.1 µF |
| Shutdown Control | Yes |
| Enable Control | Yes |
| Receivers Active in Shutdown | 2 |
| Interface Standards | EIA-232E and CCITT V.28 |
| 封裝 | 28-pin SSOP |
| 安裝類型 | Surface mount |
ADM213EARS 28-pin ssop 腳位配置指南
ADM213EARS(28-pin ssop 封裝)的腳位配置。 腳位編號、功能與連接圖定義於製造商資料手冊中。請參閱該手冊以取得確切的封裝尺寸與焊接指引。
無詳細腳位定義資料: ADM213EARS.
請參閱 資料表 以查看完整腳位配置。
典型應用
ADM213EARS 適用於 6 應用s: Industrial Serial-Port Interface, Data-Acquisition and Instrumentation, Embedded Control and Configuration, Point-of-Sale Terminal, Portable Test and Measurement Equipment, Network Equipment Management Port.
Industrial Serial-Port Interface
The ADM213EARS is appropriate for industrial equipment that needs several RS-232 channels but has only a 5 V power rail. Four drivers can support outbound control, status, and data connections, while five receivers provide flexibility for incoming commands and handshake signals. Operation up to 230 kbps accommodates legacy industrial peripherals that exceed the older 19.2 kbps limit. The shutdown function reduces consumption when the port is idle, and enable control can deactivate individual transmitters. Because the ADM213E operates at 5 V while producing the bipolar voltage levels required by RS-232, it simplifies the interface compared with a discrete implementation using separate ±12 V driver circuits.
推薦
Data-Acquisition and Instrumentation
A data-acquisition unit can use the ADM213EARS to connect legacy instruments that expose multiple RS-232 ports. The four transmit drivers can command instruments, request measurements, or route device-control signals, while the five receivers can collect readings and equipment status. The 230 kbps maximum rate is useful when an instrument uses a faster serial mode than 9600 or 19.2 kbps. Its single 5 V operating supply simplifies analog and digital power planning, and the shutdown input helps the instrument conserve power between measurement sessions. External protection should still be designed for the actual cable environment because the internal interface is intended for EIA-232E and CCITT V.28 communications rather than isolated long-distance telemetry.
推薦
Embedded Control and Configuration
The ADM213EARS fits embedded controllers that retain a legacy configuration port while also offering multiple service or diagnostic channels. Four drivers support command output and service-console activity, and five receivers allow the controller to read responses, hardware status, and interlocks. Operation from a single 5 V rail is convenient for controller boards that already use low-voltage digital supplies. The enable pins allow unused transmitter paths to be switched off, while the shutdown mode can reduce demand when the legacy interface is inactive. Two receivers remaining active during shutdown is particularly useful when a system must detect a remote wake-up, charger-present, or service-request signal without enabling the complete interface.
推薦
Point-of-Sale Terminal
A point-of-sale terminal can use the ADM213EARS to interface several legacy peripherals through one RS-232 transceiver. Typical connections include a receipt printer, magnetic-stripe reader, customer display, and weighing scale, allowing the system to combine multiple point-to-point serial links. The four transmitter channels and five receiver channels cover command and response traffic for several devices, while the 230 kbps capability provides headroom for burst-oriented transactions. A single 5 V supply reduces the need for a separate RS-232 power rail in compact terminals. Enable control should be coordinated with peripheral readiness, and shutdown can be used when the terminal enters a low-power state. The external connector interface still requires appropriate surge and ESD protection for exposed cables.
推薦
Portable Test and Measurement Equipment
The ADM213EARS is suitable for portable test equipment that must communicate with older RS-232 instruments while running from a compact 5 V power system. The transceiver combines four drivers and five receivers in a single 28-pin SSOP, preserving board area while supporting multiple serial connections. The shutdown control helps reduce consumption between measurement runs, while the option to keep two receivers active allows the instrument to detect a connected accessory or remote request. The 230 kbps rate supports higher-speed legacy links, but cable length remains a practical limitation. The board should separate logic-ground and interface-return paths where possible and apply the manufacturer's reference network close to the connector.
推薦
Network Equipment Management Port
The ADM213EARS can support a management console or service interface in equipment where RS-232 remains required for installation and maintenance. Multiple driver and receiver channels allow the platform to expose command, status, and console functions without adding several separate interface packages. Its single 5 V operation and 230 kbps capability suit dense control boards, while shutdown helps isolate unused legacy circuitry. The device is not a replacement for Ethernet, CAN, or differential RS-485 links, so it is most appropriate as a local service interface alongside a modern network transceiver. Use a separate protection strategy for an externally accessible connector, and verify grounding and level compatibility with every attached service adapter before field deployment.
推薦
推薦產品摘要
工程參考資料,適用於 ADM213EARS — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 |
|---|---|
| Product Type | 4/5 RS-232 transceiver |
| Brand | Analog Devices |
| Package | 28-pin SSOP |
| Supply Voltage | 5 V |
| Number of Drivers | 4 |
| Number of Receivers | 5 |
| Maximum Data Rate | 230 kbps |
| Charge-Pump Capacitor | 0.1 µF |
| Shutdown and Enable Controls | Yes; two receivers active during shutdown |
| Interface Standards | EIA-232E and CCITT V.28 |
主要差異化特點
- Four-driver and five-receiver integration (對比MAX3221IPWR)
- Configurable shutdown and channel-enable behavior (對比MAX3221CDBR)
- Higher supported RS-232 data rate (對比MAX3221IPWR)
設計說明
Implement the charge-pump capacitor connection and supply decoupling exactly as shown in the Analog Devices ADM213E application circuit. Place the 0.1 µF capacitor close to its designated device pins and keep the loop formed by the capacitor and IC as small as practical. Follow the manufacturer pin-description table when assigning all 28 SSOP positions; generic SSOP pinout conventions are not safe substitutes for the device-specific drawing.
Do not treat the 5 V supply pin as an RS-232 signal-level reference. The ADM213EARS internally develops the bipolar levels required for RS-232 transmission, but external cables and connected equipment can present ± voltage. Confirm receiver and driver levels against EIA-232E or CCITT V.28 requirements, and ensure every unused driver or receiver connection follows the manufacturer's recommended termination arrangement.
Use the shutdown and enable inputs to reduce switching and drive demand when channels are unused. The ADM213EARS keeps two receiver channels active during shutdown, which can be valuable for wake-up or status detection but also prevents complete interface isolation. Review the datasheet's supply-current and enable-state values before assigning a power budget, and avoid repeatedly toggling shutdown if that operating pattern conflicts with the manufacturer's specified behavior.
Separate logic and RS-232 return paths as far as practical, particularly around switching supplies and high-speed digital circuitry. Keep the interface network adjacent to the connector when surge protection is used, and route the transceiver-side connections away from sensitive analog inputs. This arrangement reduces common-mode coupling and helps preserve receiver margin in electrically noisy industrial environments.
合規資訊
The manufacturer states conformity with EIA-232E and CCITT V.28. Material-compliance declarations were not established from the available product information.