Analog Devices

ADM3068EARZ - 50 Mbps RS-485 Transceiver | Analog Devices

MPN: ADM3068EARZ ✓ Nakahanda
3.0 V to 5.5 V Vdss 14-lead SOIC_N Package 500 kbps Speed
MOQ: 1 |

ADM3068EARZ Ulas

The Analog Devices ADM3068EARZ is a 500 kbps/50 Mbps RS-485 transceiver with integrated ESD protection, supplied in a 14-lead SOIC package. It operates from a 3.0 V to 5.5 V supply and is designed for bidirectional differential data links in industrial, communications, instrumentation, and embedded-control systems. The combination of a 50 Mbps high-speed mode and a 500 kbps low-speed mode allows the same interface design to support both factory automation networks and point-to-point links that require controlled slew rates.

An RS-485 transceiver is an interface IC that converts a logic-level signal into a differential voltage and receives a differential line voltage as a logic-level output. The differential architecture belongs to the receiver and transmitter family within the broader hierarchy of interface ICs, communication ICs, and semiconductors. Its transmitter drives a balanced pair of conductors, while its receiver detects the voltage difference between those conductors. This method improves noise immunity compared with a single-ended interface when the ground reference between transmitter and receiver is imperfect.

The ADM3068E family combines a 1/1 full-duplex RS-485 transceiver with protective circuitry rated for ±12 kV IEC ESD protection. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. Operation at 50 Mbps provides ample bandwidth for high-speed industrial links, while the 500 kbps mode can preserve signal integrity over longer cables or through poorer grounding conditions. The 14-lead SOIC_N footprint supports conventional surface-mount assembly and PCB reuse across compatible industrial interface designs.

The device includes separate driver-enable and receiver-enable controls, allowing the transmitter and receiver to be managed independently. This flexibility supports full-duplex communication, bus turnaround control, echo suppression, and systems where the receive path must remain active while the driver is disabled. Analog Devices also offers the EVAL-ADM3068EEBZ evaluation platform, which exercises the input and output functions using screw-terminal connections for power, ground, logic signals, and RS-485 lines.

Typical applications include industrial automation controllers, motor-control systems, PLC peripheral interfaces, industrial gateways, instrumentation, building-control equipment, and factory data links. At 50 Mbps, board-level routing and external termination must be considered because fast edge rates increase susceptibility to reflections and impedance discontinuities. At 500 kbps, a slower slew rate improves compatibility with longer or less controlled cabling.

Place the device close to the connector and route the differential pair as a tightly coupled, continuous trace. Use the datasheet-recommended termination and protection components, and keep logic and differential signals physically separated to reduce coupling. Confirm transceiver-enable polarity in firmware because an incorrect enable sequence can hold the bus in an active state or prevent reception.

Mga alternatibo na pwedeng ilagay na ADM3068EARZ — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ADM3068EBRZ-R7

✅ Drop-In
📦 14-lead SOIC_N
Same ADM3068E family, SOIC-14 package, and 50 Mbps transceiver class; ordering-suffix-specific temperature, finish, and reel details must be verified.

📋 Alternatibo na Reference (hindi sa katalogo)

ADM3068EARZ Mga Spesipikasyon

Product Type RS-485 transceiver
Transceiver Configuration 1/1 full duplex
Low-Speed Data Rate 500 kbps
High-Speed Data Rate 50 Mbps
Supply Voltage Range 3.0 V to 5.5 V
Maximum Supply Voltage 5.5 V
Interface Standard EIA-485
Number of Terminals 14
Packhaging 14-lead SOIC_N
Uri ng Pagpapasok Surface Mount
ESD Protection ±12 kV IEC ESD protected
Hanay ng Temperature na Operasyon -40 °C to +85 °C
Tindminan RoHS ROHS3 compliant
REACH Status Unaffected
Moisture Sensitivity Level MSL 1 (unlimited)
Evaluation Platform EVAL-ADM3068EEBZ
Manufacturer Number of Drivers 1
Manufacturer Number of Receivers 1

Gabay sa Pin Configuration ng ADM3068EARZ 14-lead soic_n

Pin configuration para sa ADM3068EARZ (14-lead soic_n package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 14-lead soic_n package para sa ADM3068EARZ

Wala ng detalyadong pinout data na magagamit para sa ADM3068EARZ.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADM3068EARZ ay nararapat para sa 6 aplikasyons: Industrial Automation Controller, PLC and Remote I/O Link, Motor Drive and Encoder Communications, Industrial Gateway and Data Concentrator, Test and Measurement Front End, Building and Environmental Control.

🏭

Industrial Automation Controller

The ADM3068EARZ fits industrial automation controllers that connect sensors, motor drives, remote I/O modules, and operator panels over differential RS-485 links. Its 500 kbps low-speed mode supports reliable communication across longer industrial cabling, while the 50 Mbps mode handles short high-speed links between closely mounted control boards. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V control platforms, and ±12 kV IEC ESD protection strengthens the interface against electrostatic discharge at externally accessible ports. The 14-lead SOIC_N footprint also allows the controller to combine the transceiver with an isolated digital interface or low-power processor without relying on a specialized high-speed package.

🔧

PLC and Remote I/O Link

The ADM3068EARZ is suitable for connecting a programmable controller to remote input/output modules over a balanced RS-485 bus. At 500 kbps, the low-speed operating mode provides controlled edge behavior for cabinet-to-cabinet links, where wiring length, ground differences, and reflected signals may be less controlled than on a PCB. At 50 Mbps, the same device can support short links to high-speed local modules. Separate receiver and driver controls let the controller manage bus turnaround without disabling the receive path entirely. Its ±12 kV IEC ESD protection is especially useful when the cable enters an industrial enclosure through a connector subject to human contact and charged-object discharge.

⚡

Motor Drive and Encoder Communications

The ADM3068EARZ can carry command, diagnostic, and feedback traffic between a motor controller and remote drive electronics when the cable environment requires differential signaling. The 50 Mbps capability supports high data throughput over short PCB or cabinet connections, while the 500 kbps mode can be selected for longer field wiring. Operating from 3.0 V to 5.5 V allows integration with controllers that use either 3.3 V or 5 V logic rails. Designers should keep the differential pair away from motor-switching nodes and use the manufacturer application information to evaluate grounding, termination, and protection around high-current power paths.

🌐

Industrial Gateway and Data Concentrator

The ADM3068EARZ can bridge a local RS-485 field segment to a gateway processor in instrumentation, utility, and factory data-collection equipment. Its full-duplex 1/1 configuration allows simultaneous receive and transmit operation, while independent enables permit receive-only monitoring and controlled transmission windows. The compact 14-lead SOIC_N package is useful when several interface channels share limited board area, and the 3.0 V to 5.5 V range supports mixed-voltage logic designs. For connected cables, engineers should combine the transceiver's ±12 kV IEC ESD protection with connector-side protection, a controlled ground reference, and placement close to the entry point to minimize transient pickup along the external cable.

📡

Test and Measurement Front End

The ADM3068EARZ is appropriate for instrumentation that exchanges commands and measurement data with remote sensor fixtures over RS-485. The 500 kbps mode suits longer test-lead runs where slower edges improve tolerance to capacitance and imperfect grounding, while the 50 Mbps mode supports dense automated test systems with short connections. Differential reception helps reject common-mode noise present around power converters, relays, and switching loads. The device's 14-lead SOIC_N package is straightforward to assemble with conventional surface-mount equipment, while its 3.0 V to 5.5 V operating range supports both legacy 5 V test electronics and newer 3.3 V instrumentation platforms.

🧩

Building and Environmental Control

The ADM3068EARZ supports distributed building-control equipment, environmental monitors, and HVAC controllers that use RS-485 as a local communications backbone. The 500 kbps rate is well suited to multi-drop control networks with comparatively long cable runs, while the differential receiver improves immunity to electrical noise found near relays and power-conversion circuitry. Supply operation from 3.0 V to 5.5 V permits use with 3.3 V microcontrollers and 5 V interface electronics. Because building-control wiring can extend beyond the enclosure, place the transceiver near the connector, use connector-side ESD protection, maintain a continuous ground path, and verify termination according to the number of connected nodes and the selected baud rate.

What is the ADM3068EARZ?
The ADM3068EARZ is a 1/1 full-duplex RS-485 transceiver that supports low-speed operation to 500 kbps and high-speed operation to 50 Mbps. According to the Analog Devices ADM3068E datasheet, the device operates from 3.0 V to 5.5 V and incorporates ±12 kV IEC ESD protection. It is packaged in a 14-lead SOIC_N and is intended for industrial and communications interfaces requiring differential, noise-resistant data transmission.
What is the operating voltage of ADM3068EARZ?
The ADM3068EARZ operates from 3.0 V to 5.5 V, with a maximum supply voltage of 5.5 V. This range allows the transceiver to be powered from common 3.3 V or 5 V system rails. The Analog Devices product page identifies the device as a 500 kbps/50 Mbps RS-485 transceiver. Logic-level compatibility, supply sequencing, and the exact input and output thresholds should be checked against the manufacturer datasheet before final interface design.
What is the maximum data rate of ADM3068EARZ?
The ADM3068EARZ supports a maximum data rate of 50 Mbps and a lower-speed mode of 500 kbps. The Analog Devices ADM3068E datasheet describes the device as a 500 kbps/50 Mbps RS-485 transceiver. The 50 Mbps mode is appropriate for short, controlled PCB or cabinet links, while the 500 kbps mode offers slower edge behavior for longer cables or less favorable grounding conditions.
Is ADM3068EARZ a full-duplex RS-485 transceiver?
Yes, the ADM3068EARZ is a 1/1 full-duplex RS-485 transceiver with one transmitter and one receiver. The Analog Devices manufacturer description identifies the ADM3068E as a full-duplex interface operating up to 50 Mbps. Independent driver and receiver control permits full-time reception, transmitter disable, echo-management schemes, and bus-turnaround operation, subject to the enable polarity defined in the datasheet.
What ESD protection does ADM3068EARZ provide?
The ADM3068EARZ provides ±12 kV IEC ESD protection on its RS-485 interface. This rating is identified by Analog Devices and Mouser for the ADM3068EARZ. IEC ESD protection improves system resilience when cables are connected or disconnected and when electrostatic discharge reaches the enclosure or interface connector. It does not eliminate the need for correct board layout, controlled grounding, and appropriately placed surge-protection components.
Where can I download the ADM3068EARZ datasheet PDF?
The official ADM3068E family datasheet PDF is available from Analog Devices at the product-datasheet link listed on this page. The document contains the electrical characteristics, ESD ratings, interface information, package drawings, and application guidance for ADM3068EARZ. Use the Analog Devices document for authoritative pin definitions and application values, and use the manufacturer product page for current lifecycle and evaluation-board information.
Where can I find the ADM3068EARZ pinout?
The ADM3068EARZ pinout is shown in the pin-description table and package drawing of the Analog Devices ADM3068E datasheet. The device uses a 14-lead SOIC_N package, so the lead numbering follows the package outline rather than a BGA-style grid. Before routing a PCB, assign every physical lead from that table and preserve the exposed distinction between logic-side, power, ground, driver, receiver, and bus-side connections.
ADM3068EARZ vs ADM3068EBRZ-R7 - which one should I select?
The ADM3068EARZ and ADM3068EBRZ-R7 are both 14-lead SOIC ADM3068E-family RS-485 transceivers, but their ordering suffixes must be reviewed before substitution. The cross-reference information confirms the ADM3068EBRZ-R7 also uses an SOIC-14 package and retains the 50 Mbps transceiver class. Check the exact lead assignments, temperature grade, finish, reel configuration, and manufacturer ordering table before treating either suffix as a drop-in replacement.
When should I choose ADM3068EARZ over another RS-485 transceiver?
Choose the ADM3068EARZ when the design needs both a 50 Mbps high-speed path and a 500 kbps low-speed option in a 14-lead SOIC_N package. It is particularly useful when an industrial link must support short high-speed links while retaining a slower communication rate for longer runs. Select another device only when its pinout, supply range, protection rating, receiver topology, and data-rate limits are verified rather than inferred from the interface label alone.
Is ADM3068EARZ suitable for industrial automation?
Yes, the ADM3068EARZ is suitable for industrial automation interfaces that use differential RS-485 links. Its 500 kbps/50 Mbps rate options, 3.0 V to 5.5 V supply range, and ±12 kV IEC ESD protection suit industrial controllers, PLC peripherals, and remote I/O equipment. The Analog Devices ADM3068E datasheet also notes JEDEC MS-012-AA package compatibility, supporting use of the standard 14-lead SOIC_N mechanical footprint.
What can replace ADM3068EARZ?
A genuine replacement for the ADM3068EARZ must use the same 14-lead SOIC_N footprint, preserve the logic-side pin functions, and remain electrically compatible with the 3.0 V to 5.5 V supply and selected RS-485 data rate. The ADM3068EBRZ-R7 is a closely related ADM3068E-family option in the same SOIC-14 package, but its suffix-specific temperature, finish, and ordering details should be checked in the manufacturer table before substitution.
What is the best equivalent for ADM3068EARZ?
The closest documented equivalent is the Analog Devices ADM3068EBRZ-R7 because it belongs to the ADM3068E family, retains the RS-485 transceiver function and 50 Mbps class, and uses an SOIC-14 package. A different manufacturer's device should not be called a drop-in replacement unless its complete 14-pin map, supply limits, enable logic, fail-safe behavior, and bus loading characteristics have been verified. Request that comparison through the Request a Quote form when sourcing a specific production alternative.
How is ADM3068EARZ used in a full-duplex RS-485 link?
The ADM3068EARZ places its differential driver on one bus pair and its differential receiver on the other pair, allowing simultaneous transmission and reception. The Analog Devices ADM3068E datasheet identifies the device as a 1/1 full-duplex transceiver. Each side requires correct differential-pair routing, while the logic-side driver-enable and receiver-enable pins provide control over bus direction and receiver state.
How should ADM3068EARZ be protected against ESD at the bus connector?
Route the ADM3068EARZ bus traces directly toward the connector and minimize their length while preserving a controlled differential impedance. The transceiver's ±12 kV IEC ESD rating provides substantial device-level protection, but connector layout and external protection still determine how much energy reaches the IC. Place protection close to the connector, maintain a continuous ground return, and verify that any added network does not degrade edge rate or receiver performance.
What are the key specifications of ADM3068EARZ that engineers should know?
The ADM3068EARZ is a 14-lead SOIC_N RS-485 transceiver rated for 500 kbps low-speed and 50 Mbps high-speed operation from a 3.0 V to 5.5 V supply. According to the Analog Devices manufacturer information, it provides 1/1 full-duplex operation and ±12 kV IEC ESD protection. Its principal design trade-off is that the same compact transceiver must satisfy both fast local links and slower, more noise-tolerant communication conditions.
Where can I buy ADM3068EARZ and what is its lead time?
Use the Request a Quote form on this page to request current ADM3068EARZ pricing, stock, minimum order quantity, and production lead time. Quote requests provide the exact suffix, package, delivery quantity, and destination needed for an actionable supply response. The ADM3068EARZ is listed as active by Analog Devices, but inventory and lead time can change with demand and should be confirmed at the time of the request.

Impormasyon ng Talumpati sa Engineering for ADM3068EARZ — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADM3068EARZ for industrial or instrumentation designs requiring a 1/1 full-duplex RS-485 interface, 500 kbps low-speed operation, 50 Mbps high-speed operation, and a 14-lead SOIC_N footprint. It is particularly useful when one design must support both longer cabinet wiring and short high-speed links, or when system logic operates from either 3.3 V or 5 V. The ADM3068EBRZ-R7 is the closest documented alternative because it remains in the ADM3068E family and SOIC-14 package; however, confirm its suffix-specific temperature, finish, and reel details before substitution. For another manufacturer, require a complete pin-map and electrical comparison rather than assuming that the RS-485 label guarantees interchangeability. If a different receiver topology, fail-safe behavior, or supply range is required, evaluate that function separately even when the package appears compatible.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADM3068EBRZ-R7
Brand Analog Devices Analog Devices
Package 14-lead SOIC_N SOIC-14
Transceiver Configuration 1/1 full duplex 1/1 full duplex
Low-Speed Data Rate 500 kbps 500 kbps
High-Speed Data Rate 50 Mbps 50 Mbps
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V
ESD Protection ±12 kV IEC ESD protected ±12 kV IEC ESD protected
Interface Standard EIA-485 EIA-485
Number of Terminals 14 14

Pangunahing mga Pagkakaiba

  • Supports two communication-rate ranges in one transceiver (kumpara saADM3068EBRZ-R7)
  • Uses the standard 14-lead SOIC_N footprint (kumpara saADM3068EBRZ-R7)
  • Combines the full-duplex interface with integrated ESD protection (kumpara saADM3068EBRZ-R7)

Talaan ng Disenyo

Route the A/Y and B/Z RS-485 paths as a tightly coupled differential pair from the ADM3068EARZ to the connector. Keep the pair over a continuous reference plane, avoid plane splits, match both traces as closely as practical, and avoid routing beneath switching nodes or high-current motor paths. Place the transceiver close to the interface entry point so connector-side ESD energy is intercepted before it reaches sensitive logic.

Select the operating rate according to cable length and signal integrity. The 50 Mbps mode is appropriate for short, controlled connections, while 500 kbps provides slower edge behavior for longer or less controlled cabling. Apply the termination and fail-safe network specified by the Analog Devices ADM3068E datasheet, and verify receiver thresholds and bus loading with the complete node population rather than a single load on an isolated bench.

Do not substitute ADM3068EARZ solely because another part is labeled RS-485. Confirm the 14-lead pin map, driver and receiver enable polarity, supply range, fail-safe behavior, ESD rating, and data rate. The ADM3068EBRZ-R7 is a related ordering option in the same SOIC-14 package, but suffix-specific temperature, finish, and reel details must be confirmed in the manufacturer ordering table before production substitution.

Operate the ADM3068EARZ from a regulated 3.0 V to 5.5 V rail and keep supply and ground planes continuous beneath the device. Place local bypass capacitance close to the power and ground pins using the datasheet guidance. Because high-speed edge rates can create current transients, avoid sharing narrow supply paths with motors, relays, or switching regulators, and validate the supply with an oscilloscope at the transceiver rather than relying only on measurements at the upstream regulator.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The cross-reference information identifies the ADM3068EARZ as ROHS3 compliant, unaffected by REACH, and MSL 1. AEC-Q100 status, lead-free status, halogen-free status, and conflict-minerals status are not stated in the available product information.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ADM3068EARZ datasheet ADM3068EARZ datasheet pdf ADM3068EARZ pinout ADM3068EARZ equivalent ADM3068EARZ replacement ADM3068EARZ cross reference ADM3068EARZ vs ADM3068EBRZ-R7 ADM3068EARZ footprint ADM3068EARZ application circuit ADM3068EARZ price ADM3068EARZ stock Analog Devices ADM3068EARZ 50 Mbps RS-485 SOIC-14 transceiver ADM3068E industrial RS-485 transceiver

Mga kaugnay na Mga Komponente at mga Tuntunin

Analog Devices ADM3068EARZ ADM3068EBRZ-R7 ADM3068E EVAL-ADM3068EEBZ RS-485 EIA-485 RS-485 transceiver full-duplex transceiver interface IC communication IC semiconductor differential signaling common-mode noise logic-level signal 500 kbps 50 Mbps 3.0 V to 5.5 V supply ±12 kV IEC ESD protection 14-lead SOIC_N SOIC family surface mount SMD industrial automation JEDEC MS-012-AA RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ