ADM3068EARZ - 50 Mbps RS-485 Transceiver | Analog Devices
MPN: ADM3068EARZ ✓ সক্রিয়ADM3068EARZ সারাংশ
An RS-485 transceiver is an interface IC that converts a logic-level signal into a differential voltage and receives a differential line voltage as a logic-level output. The differential architecture belongs to the receiver and transmitter family within the broader hierarchy of interface ICs, communication ICs, and semiconductors. Its transmitter drives a balanced pair of conductors, while its receiver detects the voltage difference between those conductors. This method improves noise immunity compared with a single-ended interface when the ground reference between transmitter and receiver is imperfect.
The ADM3068E family combines a 1/1 full-duplex RS-485 transceiver with protective circuitry rated for ±12 kV IEC ESD protection. The 3.0 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. Operation at 50 Mbps provides ample bandwidth for high-speed industrial links, while the 500 kbps mode can preserve signal integrity over longer cables or through poorer grounding conditions. The 14-lead SOIC_N footprint supports conventional surface-mount assembly and PCB reuse across compatible industrial interface designs.
The device includes separate driver-enable and receiver-enable controls, allowing the transmitter and receiver to be managed independently. This flexibility supports full-duplex communication, bus turnaround control, echo suppression, and systems where the receive path must remain active while the driver is disabled. Analog Devices also offers the EVAL-ADM3068EEBZ evaluation platform, which exercises the input and output functions using screw-terminal connections for power, ground, logic signals, and RS-485 lines.
Typical applications include industrial automation controllers, motor-control systems, PLC peripheral interfaces, industrial gateways, instrumentation, building-control equipment, and factory data links. At 50 Mbps, board-level routing and external termination must be considered because fast edge rates increase susceptibility to reflections and impedance discontinuities. At 500 kbps, a slower slew rate improves compatibility with longer or less controlled cabling.
Place the device close to the connector and route the differential pair as a tightly coupled, continuous trace. Use the datasheet-recommended termination and protection components, and keep logic and differential signals physically separated to reduce coupling. Confirm transceiver-enable polarity in firmware because an incorrect enable sequence can hold the bus in an active state or prevent reception.
এর জন্য ড্রপ-ইন বিকল্প ADM3068EARZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
ADM3068EBRZ-R7
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
ADM3068EARZ বিশেষণ
| Product Type | RS-485 transceiver |
| Transceiver Configuration | 1/1 full duplex |
| Low-Speed Data Rate | 500 kbps |
| High-Speed Data Rate | 50 Mbps |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Supply Voltage | 5.5 V |
| Interface Standard | EIA-485 |
| Number of Terminals | 14 |
| প্যাকেজ | 14-lead SOIC_N |
| মাউন্টিং টাইপ | Surface Mount |
| ESD Protection | ±12 kV IEC ESD protected |
| অপারেটিং তাপমাত্রার পরিসর | -40 °C to +85 °C |
| RoHS স্ট্যাটাস | ROHS3 compliant |
| REACH Status | Unaffected |
| Moisture Sensitivity Level | MSL 1 (unlimited) |
| Evaluation Platform | EVAL-ADM3068EEBZ |
| Manufacturer Number of Drivers | 1 |
| Manufacturer Number of Receivers | 1 |
ADM3068EARZ 14-lead soic_n পিন কনফিগারেশন গাইড
ADM3068EARZ (14-lead soic_n প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি ADM3068EARZ.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
ADM3068EARZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Automation Controller, PLC and Remote I/O Link, Motor Drive and Encoder Communications, Industrial Gateway and Data Concentrator, Test and Measurement Front End, Building and Environmental Control.
Industrial Automation Controller
The ADM3068EARZ fits industrial automation controllers that connect sensors, motor drives, remote I/O modules, and operator panels over differential RS-485 links. Its 500 kbps low-speed mode supports reliable communication across longer industrial cabling, while the 50 Mbps mode handles short high-speed links between closely mounted control boards. The 3.0 V to 5.5 V supply range supports both 3.3 V and 5 V control platforms, and ±12 kV IEC ESD protection strengthens the interface against electrostatic discharge at externally accessible ports. The 14-lead SOIC_N footprint also allows the controller to combine the transceiver with an isolated digital interface or low-power processor without relying on a specialized high-speed package.
সুপারিশকৃত
PLC and Remote I/O Link
The ADM3068EARZ is suitable for connecting a programmable controller to remote input/output modules over a balanced RS-485 bus. At 500 kbps, the low-speed operating mode provides controlled edge behavior for cabinet-to-cabinet links, where wiring length, ground differences, and reflected signals may be less controlled than on a PCB. At 50 Mbps, the same device can support short links to high-speed local modules. Separate receiver and driver controls let the controller manage bus turnaround without disabling the receive path entirely. Its ±12 kV IEC ESD protection is especially useful when the cable enters an industrial enclosure through a connector subject to human contact and charged-object discharge.
সুপারিশকৃত
Motor Drive and Encoder Communications
The ADM3068EARZ can carry command, diagnostic, and feedback traffic between a motor controller and remote drive electronics when the cable environment requires differential signaling. The 50 Mbps capability supports high data throughput over short PCB or cabinet connections, while the 500 kbps mode can be selected for longer field wiring. Operating from 3.0 V to 5.5 V allows integration with controllers that use either 3.3 V or 5 V logic rails. Designers should keep the differential pair away from motor-switching nodes and use the manufacturer application information to evaluate grounding, termination, and protection around high-current power paths.
সুপারিশকৃত
Industrial Gateway and Data Concentrator
The ADM3068EARZ can bridge a local RS-485 field segment to a gateway processor in instrumentation, utility, and factory data-collection equipment. Its full-duplex 1/1 configuration allows simultaneous receive and transmit operation, while independent enables permit receive-only monitoring and controlled transmission windows. The compact 14-lead SOIC_N package is useful when several interface channels share limited board area, and the 3.0 V to 5.5 V range supports mixed-voltage logic designs. For connected cables, engineers should combine the transceiver's ±12 kV IEC ESD protection with connector-side protection, a controlled ground reference, and placement close to the entry point to minimize transient pickup along the external cable.
সুপারিশকৃত
Test and Measurement Front End
The ADM3068EARZ is appropriate for instrumentation that exchanges commands and measurement data with remote sensor fixtures over RS-485. The 500 kbps mode suits longer test-lead runs where slower edges improve tolerance to capacitance and imperfect grounding, while the 50 Mbps mode supports dense automated test systems with short connections. Differential reception helps reject common-mode noise present around power converters, relays, and switching loads. The device's 14-lead SOIC_N package is straightforward to assemble with conventional surface-mount equipment, while its 3.0 V to 5.5 V operating range supports both legacy 5 V test electronics and newer 3.3 V instrumentation platforms.
সুপারিশকৃত
Building and Environmental Control
The ADM3068EARZ supports distributed building-control equipment, environmental monitors, and HVAC controllers that use RS-485 as a local communications backbone. The 500 kbps rate is well suited to multi-drop control networks with comparatively long cable runs, while the differential receiver improves immunity to electrical noise found near relays and power-conversion circuitry. Supply operation from 3.0 V to 5.5 V permits use with 3.3 V microcontrollers and 5 V interface electronics. Because building-control wiring can extend beyond the enclosure, place the transceiver near the connector, use connector-side ESD protection, maintain a continuous ground path, and verify termination according to the number of connected nodes and the selected baud rate.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা ADM3068EARZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | ADM3068EBRZ-R7 |
|---|---|---|
| Brand | Analog Devices | Analog Devices |
| Package | 14-lead SOIC_N | SOIC-14 |
| Transceiver Configuration | 1/1 full duplex | 1/1 full duplex |
| Low-Speed Data Rate | 500 kbps | 500 kbps |
| High-Speed Data Rate | 50 Mbps | 50 Mbps |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| ESD Protection | ±12 kV IEC ESD protected | ±12 kV IEC ESD protected |
| Interface Standard | EIA-485 | EIA-485 |
| Number of Terminals | 14 | 14 |
মূল পার্থক্যসমূহ
- Supports two communication-rate ranges in one transceiver (বনামADM3068EBRZ-R7)
- Uses the standard 14-lead SOIC_N footprint (বনামADM3068EBRZ-R7)
- Combines the full-duplex interface with integrated ESD protection (বনামADM3068EBRZ-R7)
ডিজাইন নোট
Route the A/Y and B/Z RS-485 paths as a tightly coupled differential pair from the ADM3068EARZ to the connector. Keep the pair over a continuous reference plane, avoid plane splits, match both traces as closely as practical, and avoid routing beneath switching nodes or high-current motor paths. Place the transceiver close to the interface entry point so connector-side ESD energy is intercepted before it reaches sensitive logic.
Select the operating rate according to cable length and signal integrity. The 50 Mbps mode is appropriate for short, controlled connections, while 500 kbps provides slower edge behavior for longer or less controlled cabling. Apply the termination and fail-safe network specified by the Analog Devices ADM3068E datasheet, and verify receiver thresholds and bus loading with the complete node population rather than a single load on an isolated bench.
Do not substitute ADM3068EARZ solely because another part is labeled RS-485. Confirm the 14-lead pin map, driver and receiver enable polarity, supply range, fail-safe behavior, ESD rating, and data rate. The ADM3068EBRZ-R7 is a related ordering option in the same SOIC-14 package, but suffix-specific temperature, finish, and reel details must be confirmed in the manufacturer ordering table before production substitution.
Operate the ADM3068EARZ from a regulated 3.0 V to 5.5 V rail and keep supply and ground planes continuous beneath the device. Place local bypass capacitance close to the power and ground pins using the datasheet guidance. Because high-speed edge rates can create current transients, avoid sharing narrow supply paths with motors, relays, or switching regulators, and validate the supply with an oscilloscope at the transceiver rather than relying only on measurements at the upstream regulator.
কমপ্লায়েন্স তথ্য
The cross-reference information identifies the ADM3068EARZ as ROHS3 compliant, unaffected by REACH, and MSL 1. AEC-Q100 status, lead-free status, halogen-free status, and conflict-minerals status are not stated in the available product information.