Texas Instruments

ADS7845E - 12-Bit 5-Wire Touch Controller | Texas Instruments

MPN: ADS7845E ✓ Nakahanda
2.7 V to 5 V Vdss 16-lead SSOP Package
MOQ: 1 |

ADS7845E Ulas

Texas Instruments ADS7845E is a 12-bit resistive touch-screen controller with ratiometric conversion, a synchronous serial interface, and a 16-lead SSOP package. It operates from a single 2.7 V to 5 V supply, supports a conversion rate up to 125 kHz, and includes auxiliary analog inputs. These characteristics make it suitable for compact resistive touch panels used in portable instruments, industrial controls, and embedded human-interface systems.

A 5-wire resistive touch-screen controller is an analog interface integrated circuit that measures X and Y coordinates by applying controlled voltages through the transparent resistive layers of a touch panel. The measured voltage represents position relative to the panel edges, so the controller converts the analog result into a digital value for a host processor. The ADS7845E occupies the touchscreen-controller branch of the ADC and interface hierarchy, combining a sampling ADC, low-on-resistance switches, reference control, and serial communication in one device.

The controller provides 12-bit resolution, ratiometric conversion, and a maximum conversion rate of 125 kHz. Its low-power design supports portable equipment, while the power-down function helps reduce consumption when touch input is not required. A variable reference voltage from 1 V to VCC allows the analog conversion range to be matched to system requirements. The 16-lead SSOP package also provides a compact surface-mount format suitable for space-constrained control boards.

In operation, the host processor controls the ADS7845E through its synchronous serial interface. The controller drives the resistive panel, samples the resulting analog voltage, and returns a 12-bit conversion result. Ratiometric operation references the measurement to the supply voltage, which can reduce sensitivity to supply variation when the host and touch interface share the same reference. The auxiliary analog inputs extend the device beyond touch-coordinate acquisition when additional analog measurements are required.

Typical implementations include portable data-acquisition terminals, industrial operator panels, laboratory instruments, medical-device interfaces, and compact HMI systems. The 125 kHz conversion rate supports responsive coordinate acquisition, while the 2.7 V to 5 V supply range permits use with both 3.3 V and 5 V embedded systems. Designers should select the correct SSOP footprint and follow the manufacturer pin-description and recommended application-circuit tables when assigning signals.

A key design consideration is preserving clean, low-impedance analog routing between the controller and the touch-panel connector. Keep the touch and auxiliary input traces short, place bypass capacitance close to the supply pins, and avoid switching-regulator nodes beneath the analog signal paths. The measured coordinate accuracy also depends on panel calibration, active-area mapping, and mechanical repeatability, not only on the controller’s 12-bit converter.

This product record combines the manufacturer’s electrical characteristics with practical interface guidance, package details, and drop-in replacement analysis. It also organizes the key design trade-offs for engineers evaluating the ADS7845E against pin-compatible ordering variants and other touch-screen-controller families.

Mga alternatibo na pwedeng ilagay na ADS7845E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ADS7845EG4

✅ Drop-In
📦 16-lead SSOP
Same 12-bit conversion, 125 kHz maximum rate, and 2.7 V to 5 V supply ratings; 0% change in the cited headline specifications, with a different ordering/environmental-finish suffix.

📋 Alternatibo na Reference (hindi sa katalogo)

ADS7845ID

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 16-lead SSOP
Same-family 12-bit touch-controller function and electrical ratings; 0% difference in the cited 12-bit resolution, 125 kHz conversion rate, and 2.7 V to 5 V supply range.

📋 Alternatibo na Reference (hindi sa katalogo)

ADS7845E Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 5-wire resistive touch-screen controller
ADC Resolution 12 bit
Conversion Method Ratiometric conversion
Maximum Conversion Rate 125 kHz
Supply Voltage Range 2.7 V to 5 V
Reference Voltage Range 1 V to VCC
ADC Input Voltage Range 0 V to VREF
Typical Power Dissipation 750 uW at 2.7 V and 125 kHz throughput
Auxiliary Analog Inputs 2 inputs
Serial Interface Synchronous serial, SPI
Power-Down Control Yes
Hanay ng Temperature na Operasyon -40 C to +85 C
Packhaging 16-lead SSOP
Uri ng Pagpapasok Surface mount

Gabay sa Pin Configuration ng ADS7845E 16-lead ssop

Pin configuration para sa ADS7845E (16-lead ssop package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng 16-lead ssop package para sa ADS7845E

Wala ng detalyadong pinout data na magagamit para sa ADS7845E.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ADS7845E ay nararapat para sa 6 aplikasyons: Portable Data-Acquisition Terminal, Industrial Operator Panel, Laboratory Instrument Interface, Medical Device Touch Interface, Embedded Human-Interface System, Compact Control Console.

📱

Portable Data-Acquisition Terminal

The ADS7845E fits a portable instrument that combines a 5-wire resistive panel with a 3.3 V embedded processor. Its 12-bit resolution supports coordinate calculation, while the 125 kHz conversion rate permits responsive sampling during pointer movement. The 2.7 V to 5 V single-supply range allows operation from the same rail family used by the host. Full power-down support is valuable when the terminal is inactive, and the 16-lead SSOP keeps the controller footprint compact. Calibration should map the raw ratiometric results to the panel’s usable active area.

🏭

Industrial Operator Panel

An industrial HMI using a 5-wire resistive touchscreen can use the ADS7845E to acquire X and Y coordinates from a single 2.7 V to 5 V supply. The controller’s 12-bit conversion and maximum 125 kHz rate are appropriate for menu navigation and machine-control interfaces, while ratiometric operation helps relate measurements to the system supply. The two auxiliary analog inputs can also support additional analog measurements if the board architecture permits. PCB layout should isolate touch signals from switching nodes and motor-control return paths.

🔬

Laboratory Instrument Interface

The ADS7845E is appropriate for a laboratory instrument with a resistive touch display and a host processor requiring straightforward serial data transfer. The synchronous serial interface and 12-bit ADC result support digital coordinate acquisition without a separate external ADC. Its 750 uW typical dissipation at 2.7 V and 125 kHz throughput is useful for portable bench equipment, while power-down control can reduce consumption between measurements. For precise readouts, combine panel calibration with hardware layout that minimizes analog-trace pickup.

💊

Medical Device Touch Interface

A medical-device operator interface can employ the ADS7845E when the display is a 5-wire resistive panel and the control board operates from 2.7 V to 5 V. The 12-bit conversion resolution and 125 kHz maximum rate support responsive control entry, while full power-down control helps manage system consumption. Designers should keep sensitive patient-signal circuitry separate from the touch interface and validate the complete display assembly for electrical safety and usability. Panel calibration and fault-response behavior must also be verified as part of the finished system.

🧩

Embedded Human-Interface System

The ADS7845E is well suited to an embedded HMI requiring accurate resistive-touch acquisition and a compact controller footprint. Its 12-bit ratiometric conversion, 125 kHz sampling capability, and synchronous serial connection allow the host processor to poll X and Y measurements without continuous high-rate conversion. The single 2.7 V to 5 V supply supports common embedded rails, and power-down operation simplifies state management. Production designs should include calibration for display-to-panel alignment and controls for edge-of-screen behavior.

🖥️

Compact Control Console

A compact control console can use the ADS7845E to convert analog touch-panel signals into 12-bit digital coordinates for a host controller. The 16-lead SSOP package limits board area, and the 125 kHz maximum conversion rate supports responsive pointer tracking. Operation from 3.3 V or 5 V simplifies integration with embedded logic, while ratiometric conversion provides a stable reference relative to the supply. Keep the touch connector and analog traces away from high-current outputs, and account for display and panel tolerances during calibration.

What is the ADS7845E and what does it do?
The ADS7845E is a Texas Instruments 12-bit touch-screen controller for 5-wire resistive panels. It combines ratiometric conversion, low-on-resistance panel-driving switches, auxiliary analog inputs, and a synchronous serial interface in a 16-lead SSOP package. According to the manufacturer datasheet, the controller measures X and Y touch coordinates and can operate at a conversion rate up to 125 kHz, making it appropriate for portable equipment and embedded human-interface systems.
What supply voltage and conversion rate does ADS7845E support?
The ADS7845E operates from a single 2.7 V to 5 V supply and supports a maximum conversion rate of 125 kHz. According to the Texas Instruments datasheet, its typical power dissipation is 750 uW when operating from 2.7 V at the 125 kHz throughput rate. The 3.3 V and 5 V operating points make the controller suitable for both 3.3 V and 5 V embedded processor systems.
Where can I download the ADS7845E datasheet PDF?
The official ADS7845E datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/ads7845.pdf. It documents the electrical characteristics, 16-lead SSOP pin assignments, ratiometric conversion method, reference-voltage behavior, auxiliary analog inputs, and typical application connections. The manufacturer product page at https://www.ti.com/product/ADS7845 provides ordering information and additional support resources.
Where can I find the ADS7845E pinout?
Use the pin-description table and package drawing in the Texas Instruments ADS7845 datasheet for the authoritative ADS7845E pinout. The device is specified in a 16-lead SSOP package. The datasheet also identifies supply, ground, serial-interface, panel-drive, auxiliary-input, reference, and control functions. Use those assignments directly when creating the PCB footprint and checking net names against the selected SSOP variant.
Is ADS7845E suitable for a 3.3 V embedded system?
Yes, the ADS7845E is suitable for a 3.3 V embedded system because its specified single-supply operating range is 2.7 V to 5 V. The controller can therefore operate directly from a regulated 3.3 V rail while communicating with a 3.3 V host processor. The host must still match the controller’s logic levels, and the analog reference and touch-panel drive limits must remain inside the manufacturer’s specified operating conditions.
What is the best drop-in replacement for ADS7845E?
The ADS7845EG4 is the closest documented drop-in candidate for the ADS7845E because it retains the same 12-bit 5-wire controller function and 16-lead SSOP footprint. Its core conversion and supply ratings remain equivalent, although ordering and environmental qualification details should be checked before substitution. The search identified no broader set of electrically distinct, same-footprint cross-brand replacements, so circuit compatibility must be confirmed against the manufacturer datasheet.
Can ADS7845E/2K5 replace ADS7845E?
The ADS7845E/2K5 retains the ADS7845E electrical function but uses a 2500-piece tape-and-reel ordering format rather than the original ADS7845E commercial package designation. It is therefore not a distinct engineering alternative when the objective is to compare different controller functions. For an existing ADS7845E PCB, verify the package drawing and ordering suffix carefully rather than treating the reel quantity as a functional upgrade.
Is ADS7845E the same as ADS7846IRGVT?
No. The ADS7845E is a 5-wire touch-screen controller in a 16-lead SSOP package, while the comparison record identifies ADS7846IRGVT as a different touch-controller ordering option with a different package designation. Their functional distinctions include different touch-panel channel support, and the package is not identical. The ADS7846IRGVT should not be treated as a board-level drop-in replacement for an ADS7845E design without a footprint and pin-function review.
When should I choose ADS7845E over another touch-screen controller?
Choose the ADS7845E when the panel is a 5-wire resistive touch screen and the design benefits from 12-bit ratiometric conversion, a 125 kHz maximum rate, auxiliary analog inputs, and a single 2.7 V to 5 V supply. It is particularly appropriate when a host processor already supports its synchronous serial interface and the PCB can accommodate a 16-lead SSOP. Controllers using 4-wire panels, capacitive sensing, or different power-management interfaces require a separate compatibility review.
What is the difference between ADS7845E and ADS7845EG4?
The ADS7845E and ADS7845EG4 provide the same 12-bit, 5-wire resistive touch-controller function, 125 kHz maximum conversion rate, and 2.7 V to 5 V supply operation in the same 16-lead SSOP footprint. The documented distinction is in ordering or environmental finish rather than the headline conversion ratings. Confirm the final suffix, qualification status, and availability with the manufacturer before using one as a production substitute.
How should a 5-wire resistive touch panel be connected to ADS7845E?
Connect the panel’s X and Y resistive layers to the controller’s touch-drive and sense pins as shown in the manufacturer’s typical application circuit, then route the auxiliary input and reference connections according to the pin-description table. Keep the analog traces short and place supply bypass capacitance near the IC. Touch-coordinate accuracy then requires software calibration that maps raw conversion values to the panel’s usable X and Y area.
What are the key specifications engineers should know about ADS7845E?
The key ADS7845E specifications are 12-bit resolution, ratiometric conversion, a 125 kHz maximum conversion rate, a 2.7 V to 5 V supply range, and a 16-lead SSOP package. The controller also provides two auxiliary analog inputs, full power-down control, and a synchronous serial interface. According to the Texas Instruments datasheet, typical dissipation is 750 uW at 2.7 V and 125 kHz throughput.
Where can I buy ADS7845E and what is its price?
Use the Request a Quote form on this page to request current ADS7845E pricing, stock, minimum order quantity, and lead time. The product is a 16-lead SSOP touch-screen controller from Texas Instruments, and order-specific commercial terms can vary with package quantity and market conditions. The form connects the request directly to the product record without relying on a static price that may change.
How much lead time is available for ADS7845E?
Request the current lead time and minimum order quantity through the Request a Quote form on this page. Lead time can vary with the selected ordering suffix, production quantity, and supply conditions. For design planning, allow additional schedule time for touch-panel sourcing, PCB assembly, calibration, and firmware validation rather than treating the controller’s order lead time as the complete project timeline.
Is ADS7845E in stock?
Current ADS7845E inventory should be confirmed through the Request a Quote form on this page because stock can change with order quantity and package configuration. The manufacturer identifies the ADS7845 family as a 5-wire touch-screen controller product, and the exact ADS7845E commercial ordering code is shown in the product record. Request the quantity and delivery target needed for your production plan.
Does ADS7845E meet RoHS, REACH, or AEC-Q100 requirements?
The manufacturer datasheet and product page should be used to confirm the exact RoHS, REACH, and AEC-Q100 status for the selected ordering suffix. The ADS7845E is generally used in industrial and portable equipment rather than being identified in the cited product information as an automotive-qualified device. Do not infer automotive qualification solely from its 16-lead SSOP package or its -40 C to +85 C operating range.

Impormasyon ng Talumpati sa Engineering for ADS7845E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the ADS7845E for a 5-wire resistive touch panel when the host processor supports a synchronous serial interface and the design operates from a 2.7 V to 5 V rail. Its 12-bit ratiometric conversion, 125 kHz maximum rate, auxiliary analog inputs, and 16-lead SSOP package provide a compact solution for portable instruments, industrial HMIs, and embedded control consoles. ADS7845EG4 is appropriate when the same electrical function and footprint are needed with a different ordering or environmental-finish suffix; confirm qualification and ordering details before release. ADS7845ID is a same-family candidate whose core headline ratings match, but it should be independently qualified. Do not use the ADS7846IRGVT as an assumed drop-in replacement because it supports a different touch-panel arrangement and uses a different package designation.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ADS7845EG4 ADS7845ID
Package 16-lead SSOP 16-lead SSOP - same 16-lead SSOP - same
Brand Texas Instruments Texas Instruments Texas Instruments
Touch-Screen Type 5-wire resistive 5-wire resistive 5-wire resistive
ADC Resolution 12 bit 12 bit 12 bit
Maximum Conversion Rate 125 kHz 125 kHz 125 kHz
Supply Voltage Range 2.7 V to 5 V 2.7 V to 5 V 2.7 V to 5 V
Conversion Method Ratiometric Ratiometric Ratiometric
Power-Down Control Yes Yes Yes
Auxiliary Analog Inputs 2 inputs 2 inputs 2 inputs
Reference Voltage Range 1 V to VCC 1 V to VCC 1 V to VCC

Pangunahing mga Pagkakaiba

  • Higher sampling capability than lower-rate touch controllers (kumpara saADS7845EG4)
  • Single-supply operation supports common embedded rails (kumpara saADS7845ID)
  • Integrated auxiliary measurement capability (kumpara saADS7845EG4)

Talaan ng Disenyo

Route the touch-panel and auxiliary analog signals as short, continuous traces, and place the supply bypass capacitor close to the controller’s supply and ground pins. Avoid running these inputs beneath digital clocks, switching-regulator inductors, or high-current return paths. The SSOP footprint requires careful pad alignment because lead spacing and package orientation errors can connect adjacent touch-drive and serial-interface nets incorrectly.

Do not confuse the ADS7845 with a 4-wire resistive controller: the ADS7845E is intended for a 5-wire panel, and correct panel excitation and sensing depend on that topology. Confirm that the host serial interface levels match the controller supply. After assembly, calibrate both axes using the panel’s physical active limits because controller resolution alone does not correct mechanical offsets, edge nonlinearity, or display-to-touch misalignment.

Use power-down control when the display can remain idle, but verify that the host wakes the controller and completes panel settling before taking the first coordinate sample. The typical dissipation figure of 750 uW applies at 2.7 V with a 125 kHz throughput rate and does not include every external load. Account for panel-drive current, bypass-capacitor ripple, and conversion activity when budgeting the overall controller supply current.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The cited product information does not explicitly state the RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status of the exact ADS7845E ordering code. The device is not identified as an automotive-qualified part.

Kaugnay na Hanapin

ADS7845E datasheet ADS7845E datasheet pdf ADS7845E pinout ADS7845E 16 SSOP ADS7845E 12 bit resolution ADS7845E 125 kHz conversion rate ADS7845E 2.7 V to 5 V Texas Instruments ADS7845E ADS7845E touch screen controller ADS7845E application circuit ADS7845E equivalent ADS7845E replacement ADS7845E vs ADS7845EG4 ADS7845E price ADS7845E stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Texas Instruments ADS7845E ADS7845EG4 ADS7845ID ADS7846IRGVT 5-wire resistive touch-screen controller touch-screen controller sampling analog-to-digital converter ADC ratiometric conversion synchronous serial interface SPI 12-bit resolution 125 kHz conversion rate 2.7 V to 5 V single supply auxiliary analog input reference voltage power-down control 16-lead SSOP SSOP package family surface-mount package industrial human-machine interface portable data acquisition embedded touch interface
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ