Microchip Technology

AT90CAN128-16MI - 16MHz AVR CAN MCU | Microchip Technology

MPN: AT90CAN128-16MI ✓ Nakahanda
2.7 V to 5.5 V Vdss 64-QFN, 9 mm × 9 mm Package 16 MHz Speed 128 KB in-system-programmable flash Memory
MOQ: 1 |

AT90CAN128-16MI Ulas

The Microchip Technology AT90CAN128-16MI is a low-power 8-bit AVR RISC microcontroller with a 16 MHz clock, 128 KB of ISP flash memory, 4 KB EEPROM, 4 KB SRAM, and 53 general-purpose I/O lines. It is packaged in a 64-QFN 9 mm × 9 mm package with an exposed pad and integrates a CAN controller, two USARTs, a real-time counter, four timer/counters, and a byte-oriented Two-wire Serial interface.

An 8-bit microcontroller is a programmable semiconductor containing a processor core, nonvolatile program memory, data memory, and peripherals on one device. The AT90CAN128 belongs to the AVR 90CAN product family and combines the AVR enhanced RISC architecture with dedicated CAN communications. Its CAN controller supports CAN V2.0A and V2.0B protocols, allowing the MCU to participate in industrial, automotive, and embedded control networks through an external CAN transceiver.

Key features include 128 KB of in-system-programmable flash with read-while-write operation, 4 KB of EEPROM for nonvolatile parameters, 4 KB of SRAM for working data, and 53 general-purpose I/O lines. The device also provides 32 general-purpose working registers and 133 powerful instructions. Its integrated communication and timing resources reduce the need for separate peripheral devices in systems requiring CAN, UART, PWM, or serial sensor connectivity.

The AVR architecture uses a Harvard-style memory organization and an enhanced reduced-instruction-set-computing core designed for efficient instruction execution. In-system programming allows firmware to be written or updated through the programming interface without removing the chip. Read-while-write flash operation permits the program memory to remain accessible during qualifying update operations, supporting applications that need flexible field firmware maintenance.

Typical uses include industrial CAN controllers, automotive body and comfort modules, building automation equipment, motor-control systems, diagnostic instruments, and CAN-connected sensor nodes. The combination of 53 I/O lines, two USARTs, four timer/counters, and CAN connectivity is particularly useful when a compact controller must operate several peripherals while maintaining a deterministic network interface.

PCB design should preserve the exposed-pad land pattern and follow the manufacturer’s thermal and decoupling guidance. Place the input bypass capacitor close to the supply pins, connect the exposed pad to the ground plane with adequate thermal-via density, and keep the CAN RX and TX traces away from noisy switching nodes. Firmware development should use AVR-compatible toolchains and verify the device’s fuse, clock, and CAN timing configuration before field deployment.

This page combines the AT90CAN128-16MI specifications, application guidance, package details, interface resources, and confirmed same-footprint alternatives to support component selection and hardware implementation. The 64-QFN land pattern and exposed pad must be treated as one thermal and electrical footprint rather than as an optional feature.

Mga alternatibo na pwedeng ilagay na AT90CAN128-16MI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok AT90CAN128-16MI (parehas na form factor at footprint) — pagkakaiba sa CAN Controller, Core Architecture, Instruction Set, Mounting Type, Package.

Microchip Technology
CAN Controller: CAN 2.0A / 2.0B compliant
Core Architecture: AVR 8-bit RISC
Instruction Set: 133 instructions, mostly single-cycle
Ikabit sa AT90CAN128-16MI →

AT90CAN128-16MU

✅ Drop-In
Microchip Technology
📦 64-QFN (9 mm × 9 mm)
AVR 8-bit RISC · 128 KB (128K x 8) · 4 KB · 4 KB · 16 MHz · 4.5 V to 5.5 V · 53 · 32

Magkontak para sa presyo

Tingnan ang Datasheet →

AT90CAN128-16MI Mga Pinakamataas na Rating at Electrical Characteristics

Core Architecture 8-bit AVR enhanced RISC
Maksimum na Taktiko ng Oras 16 MHz
Program Memory 128 KB in-system-programmable flash
Flash Organization 128K × 8 bits
EEPROM Memory 4 KB
SRAM Memory 4 KB
General-Purpose I/O Lines 53 lines
General-Purpose Working Registers 32 registers
Instruction Set 133 powerful instructions
CAN Controller CAN V2.0A and CAN V2.0B compliant
UART Interfaces 2 USARTs
Timer/Counters 4 with compare modes and PWM
Serial Interface Byte-oriented Two-wire Serial interface
Real-Time Counter 1 real-time counter
Operating Voltage Range 2.7 V to 5.5 V
Program Memory Feature Read-while-write capable
Packhaging 64-QFN, 9 mm × 9 mm
Package Type Code HVQCCN
Terminal Count 64 terminals
Uri ng Pagpapasok No-lead surface mount
Temperature Grade Industrial

Gabay sa Pin Configuration ng AT90CAN128-16MI hvqccn

Pin configuration para sa AT90CAN128-16MI (hvqccn package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng hvqccn package para sa AT90CAN128-16MI

Wala ng detalyadong pinout data na magagamit para sa AT90CAN128-16MI.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

AT90CAN128-16MI ay nararapat para sa 6 aplikasyons: Industrial CAN Controller, Automotive Body Control Module, Building Automation Node, Motor Control and PWM System, CAN Diagnostic Instrument, CAN-Connected Sensor Node.

🏭

Industrial CAN Controller

The AT90CAN128-16MI fits industrial CAN controllers because its integrated CAN V2.0A/V2.0B controller operates alongside a 16 MHz AVR core and 53 general-purpose I/O lines. The microcontroller can manage digital machine inputs and outputs while exchanging supervisory data through a CAN transceiver connected to the CANRX and CANTX pins. Four timer/counters with compare and PWM modes support timing tasks, and two USARTs provide additional serial channels. With 128 KB of ISP flash and 4 KB of SRAM, the device has useful room for protocol handlers, diagnostics, and application firmware. The 2.7 V to 5.5 V operating range supports industrial logic systems, while the 64-QFN package keeps the controller compact. Designers should verify CAN bit timing, transceiver standby behavior, termination, and fault-handling requirements before deployment.

🚗

Automotive Body Control Module

The AT90CAN128-16MI is well suited to body and comfort control modules that combine CAN communication with conventional discrete I/O. Its 53 general-purpose I/O lines can interface with switches, lamps, solenoids, and sensing circuits, while the CAN controller supports V2.0A and V2.0B communication rules for vehicle-network nodes. The 16 MHz AVR core executes control logic, the four timer/counters provide PWM and event timing, and the two USARTs support diagnostic or external-module links. At 128 KB, the in-system-programmable flash supports field-updateable application and diagnostic code, and read-while-write operation can assist controlled firmware maintenance. The 64-QFN 9 mm × 9 mm package also limits board area. Production design must confirm the exact automotive qualification status and environmental test requirements for the selected ordering code.

🧩

Building Automation Node

The AT90CAN128-16MI can serve as a building-automation node that coordinates lighting, access, HVAC, and environmental sensors over a CAN network. Its 53 I/O lines provide ample connections for digital inputs, relay-control outputs, and status feedback, while the 16 MHz AVR core performs local control without continuous network activity. The integrated real-time counter supports time-based scheduling, four timer/counters can generate PWM or capture events, and two USARTs can connect to local displays or service tools. The 128 KB ISP flash and 4 KB EEPROM provide separate space for firmware and persistent configuration. Low-power operation is useful in distributed building systems where nodes may spend substantial time waiting for events. The 2.7 V to 5.5 V supply range permits integration with common low-voltage control rails, while the 64-QFN package supports compact panel-mounted electronics.

⚡

Motor Control and PWM System

The AT90CAN128-16MI supports compact motor-control and PWM systems where deterministic timing, network communication, and local I/O are required. Four flexible timer/counters provide compare modes and PWM outputs, making them suitable for actuator command generation, speed-related timing, or periodic sampling. The 16 MHz AVR core can execute the control loop, while the CAN V2.0A/V2.0B controller enables parameter exchange with a higher-level controller or diagnostics equipment. Two USARTs and the byte-oriented Two-wire Serial interface provide additional paths for sensors, debug tools, or local service connections. Its 128 KB flash accommodates application and update code, while 4 KB SRAM supports working state. Layout should isolate sensitive timing signals from CAN and switching-node traces, and the exposed pad should be tied to ground with sufficient thermal vias for the intended load.

🔧

CAN Diagnostic Instrument

The AT90CAN128-16MI is appropriate for a portable CAN diagnostic instrument that needs protocol handling, local display or keyboard support, and field-programmable firmware. The CAN controller handles V2.0A and V2.0B frame processing, while two USARTs can drive a local display, connect a host computer, or serve an external sensor. Four timer/counters support timeout handling, pulse capture, and periodic background tasks. Its 128 KB of ISP flash is sufficient for a boot loader and application layers, while 4 KB of EEPROM can retain device settings, calibration values, and diagnostic logs between power cycles. The 16 MHz processor provides a practical balance of processing capability and power consumption for an embedded instrument. Designers should plan a robust CAN transceiver, galvanic-isolation strategy where required, ESD protection, and firmware update mechanism based on the product’s operating environment.

📡

CAN-Connected Sensor Node

The AT90CAN128-16MI works well in a distributed sensor node that collects digital measurements and publishes them through a CAN network. Its 53 I/O lines can connect discrete sensors, switches, and status indicators, while the Two-wire Serial interface can support compatible serial sensors or external expansion. The real-time counter and four timer/counters support periodic acquisition, input capture, and PWM output, and the two USARTs provide additional communication flexibility. A 16 MHz AVR core handles preprocessing and protocol formatting without requiring a separate processor, while 128 KB of flash and 4 KB of SRAM accommodate application logic and data buffering. The 2.7 V to 5.5 V operating range simplifies integration into low-voltage sensor systems. Low-power design should disable unused peripherals, retain the CAN interface only when required, and validate wake-up behavior and bus-fault recovery across the complete temperature range.

Buod ng mga Inirekomendang Produkto

AT90CAN128-16MI Microchip Technology Ginagamit sa: Industrial CAN Controller, Automotive Body Control Module, Building Automation Node, Motor Control and PWM System, CAN Diagnostic Instrument, CAN-Connected Sensor Node AT90CAN128 Base device family member Ginagamit sa: Industrial CAN Controller, Automotive Body Control Module, Building Automation Node, Motor Control and PWM System, CAN Diagnostic Instrument, CAN-Connected Sensor Node
What is the AT90CAN128-16MI datasheet?
The AT90CAN128-16MI datasheet is the Microchip document covering the AT90CAN32, AT90CAN64, and AT90CAN128 8-bit AVR microcontrollers. Download the manufacturer PDF at https://ww1.microchip.com/downloads/en/DeviceDoc/7679S.pdf. It describes the 128 KB flash configuration of this MPN, the 4 KB SRAM and EEPROM resources, 53 I/O lines, CAN controller, timers, USARTs, electrical characteristics, and the 64-QFN package.
What are the key specifications of AT90CAN128-16MI that engineers should know?
The AT90CAN128-16MI is a 16 MHz, 8-bit AVR RISC microcontroller with 128 KB of ISP flash, 4 KB of EEPROM, 4 KB of SRAM, and 53 general-purpose I/O lines. According to the Microchip manufacturer datasheet, it also includes a CAN V2.0A/V2.0B controller, 32 working registers, four timer/counters with PWM, two USARTs, a real-time counter, and a byte-oriented Two-wire Serial interface. The device operates from 2.7 V to 5.5 V in a 64-QFN package.
Where can I find the AT90CAN128 pinout?
The AT90CAN128 pinout is shown in the pin-description section of the Microchip manufacturer datasheet, using the 64-QFN 9 mm × 9 mm outline. The package has 64 terminals and an exposed pad. Use the datasheet’s pin-description and package drawings to assign power, ground, reset, programming, clock, I/O, and CAN functions. The exposed pad must be connected to ground according to the manufacturer’s land-pattern guidance rather than treated as an unused pin.
How do I program an AT90CAN128-16MI?
Program the AT90CAN128-16MI through its in-system programming interface using an AVR-compatible programmer and the appropriate device programming tool. The manufacturer datasheet identifies 128 KB of in-system-programmable flash with read-while-write capability, allowing firmware programming without removing the microcontroller. Before programming, verify the target voltage is within 2.7 V to 5.5 V, select the correct 64-QFN device variant, and configure the clock and fuse settings required by the design.
Can AT90CAN128-16MI be used for industrial CAN control systems?
Yes, the AT90CAN128-16MI is suitable for industrial CAN control systems because it combines a 16 MHz AVR core with a CAN V2.0A/V2.0B controller and a broad collection of embedded peripherals. Its 53 I/O lines can support discrete inputs, outputs, and other controller functions, while two USARTs, four timer/counters, and a Two-wire Serial interface reduce external component requirements. The device also carries an industrial temperature designation.
What is the AT90CAN128-16MI operating voltage range?
The AT90CAN128-16MI operates from 2.7 V to 5.5 V, as specified in the Microchip manufacturer datasheet. The MCU supports in-system programming, 128 KB of flash, 4 KB of SRAM, 4 KB of EEPROM, and 53 general-purpose I/O lines. Supply design should maintain the required voltage across operating temperature and include local decoupling close to the device’s supply pins.
Where can I buy AT90CAN128-16MI online?
Use the “Request a Quote” form on this page to request AT90CAN128-16MI availability, commercial terms, and a delivery quotation. The requested part is an exact 64-QFN 9 mm × 9 mm, 16 MHz, 128 KB-flash industrial-grade ordering code. Confirm that the quotation identifies AT90CAN128-16MI rather than the related TQFP or other package variants so the assembly does not receive an incompatible land pattern.
What is the price of AT90CAN128-16MI?
Current commercial pricing for AT90CAN128-16MI depends on order quantity, availability, and the requested delivery terms. Submit the “Request a Quote” form on this page with your required quantity and packaging preference. The quote should preserve the exact 16 MHz, 128 KB-flash, 64-QFN ordering code because related AT90CAN128 variants may use a different package or temperature designation.
What is the lead time for AT90CAN128-16MI?
The current lead time for AT90CAN128-16MI depends on production and inventory status. Request a firm lead time through the “Request a Quote” form on this page, including your annual usage, order quantity, and target delivery date. The manufacturer lists the base AT90CAN128 family and the 16 MHz 64-QFN ordering code, but an order-specific schedule is required for a production commitment.
Is AT90CAN128-16MI in stock?
Current stock for AT90CAN128-16MI should be confirmed through the “Request a Quote” form on this page. Include the exact quantity, reel or tray requirement, and production schedule so the supplier can check the matching 64-QFN 9 mm × 9 mm industrial-grade device. Do not substitute AT90CAN128 package variants without checking the PCB footprint, temperature grade, and ordering suffix.
AT90CAN128-16MI vs AT90CAN128-16MU - which is better?
AT90CAN128-16MI and AT90CAN128-16MU share the same 16 MHz AVR architecture, 128 KB flash, 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, and 64-QFN package family. The distinction is the ordering suffix and its associated grade or packing designation. AT90CAN128-16MI is the industrial designation for this product, while AT90CAN128-16MU should be confirmed against the manufacturer’s ordering table before use.
When should I choose AT90CAN128-16MI instead of AT90CAN128-16MU?
Choose AT90CAN128-16MI when the BOM specifically calls for the industrial ordering designation and the assembly uses its 64-QFN 9 mm × 9 mm footprint. Both AT90CAN128-16MI and AT90CAN128-16MU are presented as 16 MHz, 128 KB-flash members of the same CAN-equipped AVR family. Before exchanging them, compare the manufacturer ordering information, temperature range, packing method, and exposed-pad requirements for the exact production revision.
What can replace AT90CAN128-16MI?
AT90CAN128-16MU is the closest confirmed same-package candidate in the available cross-reference results, with the same 16 MHz AVR core, 128 KB flash, 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, and 64-QFN package family. It is a drop-in candidate only after confirming the ordering suffix, temperature grade, and packing method. AT90CAN128-16AU and AT90CAN128-16AJ are not direct replacements because their 64-TQFP 14 mm × 14 mm package differs from the 64-QFN footprint.
Is AT90CAN128-16MI the same as AT90CAN128-16MU?
AT90CAN128-16MI and AT90CAN128-16MU are closely related 16 MHz, 128 KB-flash AT90CAN128 variants using the same 64-QFN 9 mm × 9 mm package family. They are not identical ordering codes, so the manufacturer’s suffix definitions must be checked for temperature grade, packing method, and commercial status. The confirmed shared resources include 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, CAN V2.0A/V2.0B support, two USARTs, and four timer/counters.
What is the best Microchip equivalent for AT90CAN128-16MI?
The best confirmed Microchip same-footprint candidate is AT90CAN128-16MU because it shares the 16 MHz speed, 128 KB flash, 4 KB EEPROM, 4 KB SRAM, 53 I/O lines, CAN controller, and 64-QFN package family. No cross-brand drop-in replacement is established for this exact pinout in the available comparison information. Verify ordering-suffix and packing details before substituting AT90CAN128-16MU, and preserve the exposed-pad layout on the PCB.

Impormasyon ng Talumpati sa Engineering for AT90CAN128-16MI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose AT90CAN128-16MI for a compact CAN-capable industrial controller that needs a 16 MHz AVR core, 128 KB of ISP flash, 4 KB EEPROM, 4 KB SRAM, and 53 I/O lines. Its integrated CAN V2.0A/V2.0B controller, four timer/counters with PWM, two USARTs, real-time counter, and Two-wire Serial interface make it suitable for vehicle nodes, building equipment, motor-control modules, diagnostic tools, and distributed sensor nodes. AT90CAN128-16MU is the closest confirmed same-package alternative because it shares the same core speed, memory configuration, I/O count, CAN implementation, and 64-QFN outline. Before substituting AT90CAN128-16MU, verify its ordering suffix, grade, packing method, and lifecycle status against the manufacturer’s ordering information. Do not use the 64-TQFP AT90CAN128-16AU or AT90CAN128-16AJ as direct replacements, since their land patterns differ and require PCB changes.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto AT90CAN128-16MU
Brand Microchip Technology Microchip Technology
Package 64-QFN (9 mm × 9 mm) 64-QFN (9 mm × 9 mm)
Core Architecture 8-bit AVR enhanced RISC 8-bit AVR enhanced RISC
Maximum Clock Frequency 16 MHz 16 MHz
Program Memory 128 KB ISP flash 128 KB ISP flash
EEPROM Memory 4 KB 4 KB
SRAM Memory 4 KB 4 KB
General-Purpose I/O Lines 53 lines 53 lines
CAN Controller CAN V2.0A and CAN V2.0B compliant CAN V2.0A and CAN V2.0B compliant
UART Interfaces 2 USARTs 2 USARTs
Timer/Counters 4 with compare modes and PWM 4 with compare modes and PWM
Operating Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V

Pangunahing mga Pagkakaiba

  • Combines CAN networking with extensive general-purpose I/O (kumpara saAT90CAN128-16MU)
  • Large in-system-programmable memory for field-capable firmware (kumpara saAT90CAN128-16MU)
  • Compact integrated peripheral set (kumpara saAT90CAN128-16MU)

Talaan ng Disenyo

Follow the manufacturer’s 64-QFN land pattern and exposed-pad layout exactly. The exposed pad is part of the thermal path and should be connected to the ground plane with a suitable array of thermal vias. Do not route high-current or high-voltage traces beneath the MCU footprint unless the package design explicitly permits it. Preserve component placement clearance around the exposed pad and verify the solder mask and paste apertures against the current package drawing before releasing the PCB.

Place the local supply bypass capacitor immediately adjacent to the MCU supply pins and connect it to the same ground reference with a short, low-inductance path. Keep the CAN transceiver, CANRX connection, and CANTX connection away from switching-regulator inductors and high-current motor-drive traces. If the board supports analog sensing, maintain separation between sensitive input routes and the CAN and power stages to reduce coupling from fast edge transitions.

Do not treat every AT90CAN128 ordering code as mechanically interchangeable. AT90CAN128-16AU and AT90CAN128-16AJ use a 64-TQFP package, while AT90CAN128-16MI uses a 64-QFN 9 mm × 9 mm package. Before substituting a part, compare the footprint, exposed-pad requirement, temperature grade, packing method, and firmware target. An electrically similar MCU with a different package can require a new PCB rather than a component replacement.

Design the supply for the complete 2.7 V to 5.5 V operating range and include margin for startup and bus-transient effects at the device pins. Use the manufacturer’s recommended decoupling network and confirm that the regulator can supply the MCU, CAN transceiver, pull-up networks, and attached loads without excessive droop. Check brownout and watchdog behavior as part of the power-fail strategy, particularly when the node must enter a safe state after supply interruption.

Apply the CAN transceiver’s system-design requirements for termination, split termination, common-mode chokes, and protection devices. The MCU supplies digital CAN logic signals, while the physical bus interface is implemented by an external transceiver. Review propagation delay, bus timing, and fault recovery against the selected transceiver and network topology. Avoid long unprotected stubs and maintain a continuous ground reference beneath the bus interface to reduce susceptibility to electromagnetic interference.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The manufacturer product information identifies AT90CAN128-16MI as industrial grade but does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for this exact ordering code.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

at90can128 datasheet at90can128 pinout at90can128 16au datasheet at90can128 programming at90can128 development board at90can128 pdf AT90CAN128-16MI datasheet pdf AT90CAN128-16MI pinout AT90CAN128-16MI replacement AT90CAN128-16MI equivalent AT90CAN128-16MI vs AT90CAN128-16MU AT90CAN128 64-QFN footprint AT90CAN128-16MI price AT90CAN128-16MI stock Microchip AT90CAN128-16MI

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology AT90CAN128-16MI AT90CAN128 AT90CAN128-16MU AT90CAN128-16AU AT90CAN128-16AJ AT90CAN64 AT90CAN32 AVR enhanced RISC architecture 8-bit microcontroller embedded microcontroller semiconductor CAN controller CAN V2.0A CAN V2.0B in-system programming ISP flash memory read-while-write EEPROM SRAM USART Two-wire Serial interface PWM real-time counter 64-QFN QFN family surface mount SMD
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ