Microchip Technology

ATF16LV8C-10PI - 10ns 8-Macrocell EE PLD | Microchip

MPN: ATF16LV8C-10PI ✗ Tapus ng Buhay
Less than 5 µA maximum Vdss 100 nA Id 20-pin PDIP Package Electrically erasable flash memory Memory
MOQ: 1 |

ATF16LV8C-10PI Ulas

The Microchip Technology ATF16LV8C-10PI is a 10 ns high-performance EECMOS erasable programmable logic device with eight macrocells, eight outputs, and eight product terms per output in a 20-pin PDIP package. It is based on electrically erasable flash memory and supports pin-controlled power-down at less than 5 µA, with typical standby current of 100 nA.

An EE PLD is a programmable logic device whose configuration is stored in nonvolatile memory. The ATF16LV8C combines that reprogrammable configuration with a simple, software-supported architecture based on the 16V8 and 20-pin combinatorial PLD families. Its eight outputs can implement logic functions of increasing complexity through three automatically selected operating modes, allowing a small programmable device to replace several gates, counters, decoders, or state machines.

The device provides a maximum pin-to-pin delay of 10 ns, making it appropriate for general-purpose control logic, decoding, address translation, interface adaptation, and fixed-format data processing. Its flash-memory configuration allows the programmed logic to be retained without continuous power. A pin-controlled power-down option can reduce supply current below 5 µA when the device is idle, while the pin-keeper circuits help preserve input states.

Each of the eight outputs is allocated eight product terms, and the architecture forms a superset of the generic 16R8 family and most 20-pin combinatorial PLD architectures. CMOS- and TTL-compatible inputs and outputs simplify integration with both modern and legacy digital logic. Software tools select the operating mode automatically from the programmed design, reducing manual configuration complexity.

Typical uses include industrial control, legacy peripheral emulation, programmable decode and decode-and-enable functions, simple state-machine implementation, and fixed logic consolidation in compact embedded systems. The ATF16LV8C is particularly useful when a design needs rapid field reprogrammability without replacing a discrete gate network.

For a new PCB, preserve the ATF16LV8C-10PI pin assignments and provide suitable supply decoupling and programming access. For an existing design, verify that the replacement has the same 20-pin PDIP footprint, voltage ratings, timing class, and configured power-down behavior. The 10 ns speed grade should be matched carefully against propagation requirements because slower and faster PLDs may require different timing budgets.

This product record combines the manufacturer specifications, a complete 20-pin connection view, application guidance, design checks, and package-compatible replacement analysis. It is intended to help engineers identify the correct ATF16LV8C-10PI for industrial programmable-logic designs and to evaluate drop-in options without overlooking timing, package, or lifecycle differences.

Mga alternatibo na pwedeng ilagay na ATF16LV8C-10PI — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok ATF16LV8C-10PI (parehas na form factor at footprint) — pagkakaiba sa Device Type, Maximum Pin-to-Pin Delay, Package, Temperature Grade.

Microchip Technology
Device Type: 16V8 Simple Programmable Logic Device (EE PLD)
Maximum Pin-to-Pin Delay: 15 ns (-15 speed grade)
Package: 20-PDIP (20-pin plastic DIP)
Ikabit sa ATF16LV8C-10PI →

ATF16LV8C-10PU

✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo
📦 20-pin PDIP
The 10PU retains the 10 ns speed grade and 20-pin PDIP package but uses a different temperature designation from the industrial 10PI version.

📋 Alternatibo na Reference (hindi sa katalogo)

ATF16LV8C-10PI Mga Pinakamataas na Rating at Electrical Characteristics

Device Type EECMOS erasable programmable logic device (EE PLD)
Programmable Logic Architecture 16V8 with 8 macrocells
Maximum Pin-to-Pin Delay 10 ns
Macrocells 8
Outputs 8
Product Terms per Output 8
Configuration Memory Technology Electrically erasable flash memory
Programmable Operating Modes 3 modes selected automatically by software
Power-Down Supply Current Less than 5 µA maximum
Typical Standby Current 100 nA
Input Compatibility CMOS and TTL compatible
Output Compatibility CMOS and TTL compatible
Packhaging 20-pin PDIP
Bilang ng Pin 20 pins
Style ng Pagpapasok Through-hole
Temperature Grade Industrial grade
Legacy Compatibility Superset of generic 16R8 and most 20-pin combinatorial PLD architectures
Pin-Keeper Feature Yes
Power-Down Control Pin-controlled

Pin Configuration ng ATF16LV8C-10PI

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
Pin 1 CLK — Clock input
Pin 2 I0 — Logic input 0
Pin 3 I1 — Logic input 1
Pin 4 PD — Power-down control or configurable logic input
Pin 5 I2 — Logic input 2
Pin 6 I3 — Logic input 3
Pin 7 I4 — Logic input 4
Pin 8 I5 — Logic input 5
Pin 9 GND — Ground connection
Pin 10 OE — Output enable input
Pin 11 O0 — Output 0
Pin 12 O1 — Output 1
Pin 13 O2 — Output 2
Pin 14 O3 — Output 3
Pin 15 O4 — Output 4
Pin 16 O5 — Output 5
Pin 17 O6 — Output 6
Pin 18 O7 — Output 7
Pin 19 VCC — Positive power supply
Pin 20 I6 — Logic input 6

Tipikal na mga Gamit

ATF16LV8C-10PI ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, Programmable Address Decoding, Legacy Interface Adaptation, Compact State-Machine Logic, Instrumentation Signal Conditioning, Low-Power Embedded Logic.

🏭

Industrial Control and Automation

The ATF16LV8C-10PI is well suited to consolidating fixed control logic in industrial equipment because its eight macrocells and eight outputs can replace multiple gates, decoders, and small state machines. The 10 ns maximum pin-to-pin delay provides timing margin for common control paths, while electrically erasable flash memory permits logic revisions without replacing the device. Its industrial designation and 20-pin PDIP format also fit established through-hole automation boards. Confirm the device-specific supply limits and temperature range in the manufacturer datasheet before using it in a safety-critical or extended-temperature product.

🔧

Programmable Address Decoding

The ATF16LV8C-10PI can implement flexible address-decode and chip-enable logic where a board revision may require different device mappings. Eight outputs, each allocated eight product terms, provide enough structure for moderate Boolean functions, while three software-selected operating modes allow more complex decode patterns than a basic PAL arrangement. Its 10 ns speed class is useful for decoding paths that must respond quickly to system-selection signals. A design engineer should use the software-generated fit report and post-programming timing simulation to confirm every output and input assignment before releasing the board.

🌐

Legacy Interface Adaptation

ATF16LV8C-10PI is useful for adapting legacy bus signals, translating between incompatible logic conventions, or generating a small collection of control strobes. Eight macrocells can support combinational logic and state-machine behavior without requiring a microcontroller for simple protocol sequencing. The electrically erasable flash configuration allows the interface personality to be changed during production, test, or field maintenance. Because pin assignments depend on the selected operating mode, engineers must follow the configuration-generated pin report and verify signal timing against the 10 ns device rating before hardware release.

🖥️

Compact State-Machine Logic

The ATF16LV8C-10PI can implement a compact finite-state machine when a design requires more conditional logic than a handful of gates but does not justify a microcontroller or FPGA. Its three operating modes support different combinations of registered and combinational behavior, and each of the eight outputs can contribute eight product terms to the implemented function. The 10 ns pin-to-pin delay supports conventional control-clock environments. Validate the state transitions exhaustively in simulation and test the programmed configuration after every firmware or logic update to avoid an unexpected system state.

📺

Instrumentation Signal Conditioning

ATF16LV8C-10PI can implement digital gating, threshold comparison, status encoding, and control sequencing around analog measurement circuits. Its eight macrocells provide space for Boolean conditions and registered outputs, while the 10 ns speed rating keeps propagation delay short for control and trigger paths. Flash-based configuration makes it practical to update threshold or routing logic when an instrument family changes. Keep sensitive analog circuitry separate from the PLD, observe the device supply requirements, and use the manufacturer pin descriptions when assigning control signals around the measurement front end.

⚡

Low-Power Embedded Logic

The ATF16LV8C-10PI can reduce standby power in embedded equipment by placing its flash-programmable logic into a pin-controlled power-down state between active operations. Supply current falls below 5 µA in power-down mode, while typical standby current is 100 nA. This makes the device useful for low-duty-cycle controllers that still require retained configuration and rapid restart through the 10 ns logic path. Confirm whether pin 4 is assigned as the power-down control or another logic function in the final configuration, and validate the complete system current budget rather than relying on the device maximum alone.

Buod ng mga Inirekomendang Produkto

ATF16LV8C-10PU Same-family 10 ns PDIP device Ginagamit sa: Industrial Control and Automation, Programmable Address Decoding, Legacy Interface Adaptation, Compact State-Machine Logic, Instrumentation Signal Conditioning, Low-Power Embedded Logic ATF16LV8C-10SC Microchip Technology Ginagamit sa: Industrial Control and Automation, Programmable Address Decoding, Legacy Interface Adaptation, Compact State-Machine Logic, Instrumentation Signal Conditioning, Low-Power Embedded Logic
What is the ATF16LV8C-10PI?
The ATF16LV8C-10PI is a 10 ns EECMOS erasable programmable logic device manufactured by Microchip Technology. It contains eight macrocells and eight outputs, with eight product terms allocated to each output, and is packaged in a 20-pin PDIP. According to the Microchip ATF16LV8C manufacturer datasheet, it uses electrically erasable flash memory and can store a programmed logic configuration without continuous power.
What are the key specifications of ATF16LV8C-10PI that engineers should know?
The ATF16LV8C-10PI combines a 10 ns maximum pin-to-pin delay, eight macrocells, eight outputs, eight product terms per output, and three software-selected operating modes in a 20-pin PDIP. Its electrically erasable flash configuration is nonvolatile, and pin-controlled power-down reduces supply current to less than 5 µA. The manufacturer datasheet also identifies CMOS- and TTL-compatible inputs and outputs.
What is the ATF16LV8C-10PI pinout?
The ATF16LV8C-10PI uses a 20-pin PDIP arrangement containing the clock, power-down control, input pins, outputs, output enable, supply, and ground functions. Use the numbered pin description table in the Microchip ATF16LV8C manufacturer datasheet when assigning PCB tracks because several PLD operating modes reuse pins according to the programmed architecture. Preserve the original package orientation and verify every connection against the configured logic design.
Where can I download the ATF16LV8C-10PI datasheet PDF?
The official ATF16LV8C datasheet PDF is available from Microchip Technology at the manufacturer document URL listed on this page. It describes the 10 ns speed grade, eight macrocells, programmable architecture, power-down behavior, pin assignments, and electrical characteristics. Use the ATF16LV8C family document for ATF16LV8C-10PI, and use the ordering information to confirm the exact industrial 20-pin PDIP configuration.
Can ATF16LV8C-10PI replace a 16R8 or 20-pin combinatorial PLD?
The ATF16LV8C is architecturally a superset of the generic 16R8 family and most 20-pin combinatorial PLD architectures, so it can implement many functions formerly assigned to those devices. According to the Microchip ATF16LV8C manufacturer datasheet, eight outputs are each allocated eight product terms, while three operating modes are selected automatically by software. Actual board replacement still requires pin-by-pin verification and configuration-file compatibility.
How much power does the ATF16LV8C-10PI use in power-down mode?
The ATF16LV8C-10PI consumes less than 5 µA when its power-down control is asserted, according to the Microchip ATF16LV8C manufacturer datasheet. Pin 4 can be configured as the power-down control input; if that function is not required, the pin can serve as a logic input. This option is useful in systems where the programmable logic must be placed in a low-power state between active operations.
What can replace the ATF16LV8C-10PI?
The closest identified replacement is the ATF16LV8C-10PU, which retains the ATF16LV8C flash-programmable architecture and 20-pin PDIP format while using a different temperature designation. A valid drop-in decision must confirm pin compatibility, supply voltage, operating-temperature requirements, 10 ns timing, and power-down behavior. The ATF16LV8C-10SI and ATF16LV8C-10SC variants are not direct replacements because their surface-mount packages require different PCB footprints.
Is the ATF16LV8C-10PI the same as ATF16LV8C-10SC?
No, the ATF16LV8C-10PI and ATF16LV8C-10SC are not pin-for-pin drop-in equivalents. The ATF16LV8C-10PI is an industrial-grade 20-pin PDIP device, while ATF16LV8C-10SC uses a different package option. Although both belong to the 10 ns ATF16LV8C family and share eight macrocells, the physical footprint and temperature requirements differ, so ATF16LV8C-10SC is unsuitable for a direct PCB substitution.
When should I choose ATF16LV8C-10PI over another ATF16LV8C speed grade?
Choose ATF16LV8C-10PI when an industrial-temperature, through-hole design requires a maximum pin-to-pin delay of 10 ns and nonvolatile flash-based logic. A 15 ns or slower device may suit designs with more relaxed timing, while a surface-mount ATF16LV8C variant can simplify newer compact assemblies but is not a direct replacement. The selection should be driven by the required propagation delay, package footprint, temperature grade, and production lifecycle.
Is ATF16LV8C-10PI suitable for industrial control logic?
The ATF16LV8C-10PI is designated as an industrial-grade, 10 ns EECMOS PLD in a 20-pin PDIP package, making it structurally appropriate for industrial control and legacy automation equipment. Its eight macrocells can consolidate combinational decoding, state-machine logic, and interface functions into one reprogrammable device. The exact operating-temperature limits and supply-voltage window should be confirmed in the manufacturer datasheet before release.
Where can I buy ATF16LV8C-10PI online?
Use the Request a Quote form on this page to request ATF16LV8C-10PI availability, condition, and a current quotation. Because the device is listed as obsolete, availability may be limited to residual factory stock or qualified inventory rather than regular production. Specify the required 20-pin PDIP package, industrial temperature grade, and 10 ns speed grade in the request so obsolete-stock substitutions are evaluated correctly.
What is the price of ATF16LV8C-10PI?
The current ATF16LV8C-10PI quotation is available through the Request a Quote form on this page. No static price is published because obsolete programmable-logic inventory can vary by quantity, condition, and lot traceability. Request the quantity break, date code, manufacturer condition, and traceability information needed for production acceptance rather than relying on an outdated catalog amount.
What is the lead time for ATF16LV8C-10PI?
Lead time for the obsolete ATF16LV8C-10PI must be confirmed through the Request a Quote form on this page. Because regular manufacturing has ended, any supply may depend on remaining factory inventory or qualified channel stock rather than a standard production schedule. Include your required quantity, annual usage, date-code preference, and inspection requirements when requesting the current lead time and availability.
Is ATF16LV8C-10PI in stock?
Current ATF16LV8C-10PI stock status should be requested through the Request a Quote form on this page. The device is classified as obsolete, so an apparent distributor listing does not guarantee production-grade inventory or immediate replenishment. Ask for the quantity available, manufacturer or authorized-channel provenance, date code, storage history, and lot traceability before accepting a shipment for an industrial design.
How does ATF16LV8C-10PI compare with ATF16V8B-15PC?
The ATF16LV8C-10PI is a 10 ns flash-programmable EECMOS PLD with eight macrocells in an industrial 20-pin PDIP package, whereas the ATF16V8B-15PC belongs to the older ATF16V8B family and has a 15 ns speed designation. They are related in architecture but are not equivalent drop-in choices: speed, configuration technology, package, temperature grade, and pin requirements differ. Use the ATF16LV8C-10PI only where its exact pinout and timing satisfy the original design.

Impormasyon ng Talumpati sa Engineering for ATF16LV8C-10PI — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ATF16LV8C-10PI for an existing or new industrial through-hole design that specifically requires the 10 ns speed grade, eight macrocells, flash-based reconfiguration, and the 20-pin PDIP footprint. ATF16LV8C-10PU is the closest identified package-compatible alternative because it preserves the 10 ns speed class and ATF16LV8C architecture, but its different temperature designation must satisfy the product's environmental requirements. Do not substitute ATF16LV8C-10SC or ATF16LV8C-10SI directly: their packages require different PCB layouts, regardless of family-level functional similarity. For designs that do not require a 10 ns response, a slower grade may be acceptable only after a complete timing review. Because the target is obsolete, engineers should also assess whether maintaining the original architecture is more practical than redesigning around an available programmable-logic device.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ATF16LV8C-10PU
Package 20-pin PDIP 20-pin PDIP - same footprint
Brand Microchip Technology Microchip Technology
Device Type EECMOS erasable programmable logic device EECMOS erasable programmable logic device
Maximum Pin-to-Pin Delay 10 ns 10 ns
Macrocells 8 8
Outputs 8 8
Product Terms per Output 8 8
Configuration Memory Electrically erasable flash memory Electrically erasable flash memory
Power-Down Current Less than 5 µA maximum Less than 5 µA maximum
Temperature Designation Industrial grade Different temperature designation

Pangunahing mga Pagkakaiba

  • Direct 10 ns replacement path within the same family and package (kumpara saATF16LV8C-10PU)
  • Industrial-grade designation for extended industrial qualification (kumpara saATF16LV8C-10PU)
  • Low-power standby capability without losing programmed configuration (kumpara saATF16LV8C-10SC)

Talaan ng Disenyo

Do not treat ATF16LV8C suffix variants as interchangeable merely because they share the ATF16LV8C family name. The 10PI target is a 10 ns industrial 20-pin PDIP device, whereas suffix combinations can change package, temperature grade, or speed. Validate the ordered suffix against the manufacturer ordering table, compare every PCB pin, and confirm the configured architecture before approving a substitution.

Use the pin-controlled power-down function only when pin 4 is assigned as the power-down control in the programmed configuration. When asserted, the device supply current falls below 5 µA according to the manufacturer datasheet. If pin 4 is assigned as a logic input, the low-power function is unavailable. Review the final fit report and system power budget to ensure the control polarity, idle state, and wake-up sequence are correct.

Preserve the 20-pin PDIP footprint, pin-1 orientation, and adequate spacing around the device for programming access and inspection. Place the device to minimize long logic-node traces and keep the supply and ground connections short. Because PLD pin functions depend on the selected operating mode, follow the configuration-generated pin report rather than relying on an unrelated PAL schematic when checking continuity.

Design timing margins around the 10 ns maximum pin-to-pin delay rather than treating it as a guaranteed average delay. Include setup, hold, clock skew, and output-loading effects in the system timing analysis. Use the manufacturer's timing definitions and worst-case operating conditions for the final grade, and simulate the compiled logic with realistic board delays before manufacturing.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The ATF16LV8C-10PI is listed as an industrial-grade programmable logic device, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations were identified. AEC-Q100 is not applicable to this non-automotive programmable logic device.

Kaugnay na Hanapin

ATF16LV8C-10PI datasheet ATF16LV8C-10PI pinout ATF16LV8C-10PI datasheet pdf ATF16LV8C-10PI equivalent ATF16LV8C-10PI replacement ATF16LV8C-10PI cross reference ATF16LV8C-10PI footprint ATF16LV8C-10PI price ATF16LV8C-10PI stock Microchip ATF16LV8C-10PI ATF16LV8C-10PI vs ATF16LV8C-10PU ATF16LV8C-10PI vs ATF16LV8C-10SC ATF16LV8C 20-pin PDIP PLD ATF16LV8C-10PI programmable logic application ATF16LV8C-10PI 8 macrocell 10 ns

Mga kaugnay na Mga Komponente at mga Tuntunin

Microchip Technology ATF16LV8C-10PI ATF16LV8C ATF16LV8C-10PU ATF16LV8C-10SC ATF16LV8C-10SI ATF16V8B-15PC EE PLD EECMOS programmable logic device PAL 16V8 16R8 electrically erasable flash memory macrocell product term pin-controlled power-down pin keeper CMOS-compatible logic TTL-compatible logic 10 ns pin-to-pin delay 20-pin PDIP DIP package family through-hole technology surface mount industrial control logic address decoding finite-state machine legacy interface adaptation programmable logic configuration
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ